other machines and plants used for sale (20,346)

n

Dreher DHD 30 520Year of manuf. : 2019 Control : Sonstige ____________Description:Double unwinding reel with driveDesign:Short designBand width min./max.:230 – 520 mmCoil weight max.:2 × 30 kNNumber of reels:1Coil outer diameter min./max.:1,500 – 2,000 mmSpreading range min./ max.:460 – 525 mmCoil delivery:Industrial truckReel loading:From the front (operating side)Coil unwinding:From the underside of the coilMaterial:Aluminium, softStrip thickness min./max.:0.8 – 1.2 mmTensile strength (Rm) min./max. :100 – 250 N/mm²Strip cross-section max.:600 N/mm²Straightening capacity:See straightening diagramStrip speed min./max.:2 – 10 m/minStrip infeed height above floor: 2,100 mmDegree of automation:Fixed / ± XXX mmOperating mode:Jog mode on sightsystem parametersSystem stroke rate:45 rpmWorking direction:Right–left, front loading with forklift truckFlatness of insta ...

Screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Mahle, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min -Technical data: see photo of the nameplate -Number: 2x heat exchangers available -Price: per piece -Dimensions: 810/385/H660 mm -Weight: 93 kg/unit

Hydraulic Hollow Piston Cylinder Manufacturer: Power Team Part Number: RH 705 Model C 60 tons Center Hole Cylinder/Ram - Double-Acting / Hydraulic Return, 60 ton Capacity, 5.000 in Stroke, 9.500 in Retracted, 14.500 in Extended NEW and fully functional, from stock, see pictures for more details.

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013

Water bath / Shaking water bath Manufacturer Nickel-Electro Ltd. Clifton Type NE 5 – 28 D Capacity 28 litres Power 1000 watts Temperature range +5°C – 100 °C PiD control Test tube rack Simultaneous observation of the set and actual temperature

Marking system Manufacturer: Röltgen Type 218 00000 Year of construction 2006

Convection oven Manufacturer: Memmert Type: ULE 500 Features: Material: Stainless Steel Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible.

High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Qty. 1 Second-hand aluminium profile lamination line Mfc.: S.I.M. PACK Srl Model: SIRIO PROFILI TA/200/2S Built: 2011 Stopped: 2026 Voltage: 400 V, 3 ph., 50 Hz The machine applies the protective film simultaneously on 2 flat surfaces of profiles with a max. width 200 mm and height 200 mm and the cut of the film between the profiles is automatic. The machine in made up of a strong electric welded iron tubular frame on which there are: One unit for the dragging of the film on the upper and lower surface composed by a vertical column bearing no. 2 opposed rubbered rollers. No.1 Pulling unit composed by no. 2 rollers position at the exit of the machine. No. 1 Automatic cutting activated by pneumatic cylinder with vertical movement. No. 2 Idle roller table 2.5 m long, with PVC covered rolls and alignmentlocator to get a correct Alignment of the material to be coat with the prot ...

For sale is a used rotatable sealing table VT H4

Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement.

It is a complete system for dyeing and polishing the side edges of the belt, with 3 heating ovens, extraction system and automatic ejection at the end.

Class/vehicle type: semi-trailer tractor and tractor unit, body type: closed, color: green, curb weight: 6.084t, gross vehicle weight: 10.6t, max. permissible axle load axle 1: 6.2t, max. permissible axle load axle 2: 6.2t, drive type: diesel, max. speed: 95km/h, power: 110kW, displacement (P1): 7675cm³, rated speed: 2600rpm, stationary noise level: 90dBA, engine speed for stationary noise measurement: 1950rpm, mileage: 235,340km, with documentation. An on-site inspection is possible.

Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...

1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equ ...

Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible.

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

The GEA Nu-Con CV is a sanitary Convey Through rotary valve (airlock) designed for use in gravity and pneumatic conveying systems for the controlled handling of food, dairy, pharmaceutical, nutritional products and other dry ingredients. The blow-through CV configuration allows product to enter through the top inlet and discharge horizontally at 90° to the inlet into a pneumatic conveying line. The system can be operated in either vacuum or pressure conveying applications. The rotary valve is designed with a bladed cylindrical rotor and accurately controlled clearances between the rotor and valve housing. The sanitary construction provides easy access to the product-contact areas for inspection, maintenance and cleaning. Previously used for transporting of Casein in a dairy factory. Motor: 0,37 kW - 220 / 415 V - 50 Hz - 1.370 / 1.395 rpm - 1,74 / 0,97 Amp - 3 Ph. Electropower gearbox,  ...

For sale is a robust industrial and dedusting vacuum cleaner RINGLER RI 332-D3.0 in used condition. Technical data: Power main motor: 3.0 kW Connection: 380 V / 3~ / 50 Hz Rated current: 6.5 A Speed: 2,870 rpm Serial No.: 89325 Vacuum gauge down to -250 mbar Filter cleaning via separate electric vibrator: Power: 0.05 kW Connection: 380 V / 3~ / 50 Hz Speed: approx. 1,300 rpm Equipment: Large storage tank Filter unit with electric vibrator Vacuum gauge Switching unit Mobile industrial version Suction hoses and pictured accessories Functional state: The industrial vacuum cleaner was put into operation when the picture was taken. A vacuum of approx. -232 mbar was achieved at the existing vacuum gauge (see photo). The electric filter vibrator was not tested separately. The following historical manufacturer's marking is on the devi ...

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible.

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg