other machinery for waste disposal and recycling used for sale (401)

Ladies and gentlemen, we offer: Alligator scissors shepherds: Type: Proto III Drive: 18.5 KW Number of cuts per minute: 22 Measuring opening Knife tip: 310 mm Knife length: 810 mm Weight: 6.8 tons Machine has been overhauled. Control cabinet renewed

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

The Vulcan is Hitacht's fastest metal analyzer with the most advanced display and reporting system. Compared to its predecessor, the m-Pulse, it has been fundamentally redesigned and offers many new possibilities, such as GPS, camera, WiFi and pre-burning function. The operation is functionally oriented to the menu guides, as they are known from smartphones. The operation of the device via the functional touchscreen is correspondingly easy. The equipment offered here comes from our demonstration pool and is only 12 months old, so it is still sold with a used machine warranty.

- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal

Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. Processing of the cable pages at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are is carried out in the two-blade system either both knife independently to adjust continuous or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Manufacturer: Diebels GbR recycling machines Cutting capacity: 30 ton Materials:-Aluminium (cylinder heads), brass (taps), copper, etc. Special features: work desk side folding Weight: 1100 kg Drive: 7,5 kw / 400 V Control: foot pedal

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)

JMC 407 overhauled new model / young device Drive: 7,5 KW Weight: 880 kg 4 x reversible knives Truck intake/wheels

New BIG BAG replenishment station with spiral conveyor the devices in stock available for immediate delivery. Spiral conveyor discharge height 2800 mm for 1 qbm big bags. At smaller big bag can be inter's pallets. NET price plus VAT

New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.

New BIG BAG filling station The device is available immediately from stock. Technical data: Weight: 160 kg Dimensions: 1400 x 1640 x 1960 mm (L x W x H) Maximum dimensions of the big bag's: 1000 x 1400 x 1500 mm (L x W x H) Technical data sheet, see the images on offer. At smaller big bag can be inter's pallets.

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...