other machinery for waste disposal and recycling used for sale (401)

ANACONDA TR100 with CAT 2.8 (55kW) – TIER 5, ANACONDA TR100 with JCB Dieselmax (55kW) – TIER 5, ANACONDA TR100 with DEUTZ TD 2.9 L4 (50kW) – Tier 5, 33 m long conveyor belt, hydraulically foldable inlet and rear area, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 3-ply construction., Weight: 19.000 kg – 19 tons depending on equipment

Series equipment:, ANACONDA DF 514 with CAT 4.4 (110kW) – Tier 5, High-performance screening box 4.27m x 1.52m 2-deck screener, Side tensioned screen deck system (upper and lower deck), Bunker volume of 7.2 m³, Variable speed at bunker belt 4-layer belt conveyor, Screening box angle adjustable between 15–19º, Sieve box paths for maintenance and screen change, Variable speed for main and side conveyors, BUNKER:, Width: 2.7 m, Length: 3.7 m, Maximum volume: 7.2 m³, BUNKER CONVEYOR, Width: 1200 mm, Type: Flat cable, COLLECTION CONVEYOR, Width: 1200 mm, FEED conveyer belt:, Width: 800 mm, Throw height: 3.80 m, MID conveyer belt:, Width: 800 mm, Outlet height: 3.60 m, OVERBONDED TRANSPORT BELT-HECKBAND:, Width: 1200 mm, Outlet height: 3.40 m, length: 3,7 m, Maximum volume: 7,2 m³, width: 1200 mm, Type: Flat ribbon, width: 800 mm, width: 800 mm, Ejection height: 3,80 m

We offer a new unused cable peeling machine from a small German company specializing in recycling machines. The machine is new and unused and can be used for different cable diameters. from 10 - approx. 50 mm the machine is very robustly constructed

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible.

A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw ...

Description Filter Hose for Alko Mobil Jet 140 to 300 Material: Polyester, BIA Cat: M, antistatic, Weight 460 g/m² We manufacture every filter size! Prices, delivery times and payment terms on request. Telephone advice at: 05656-9239404

Mobile sorting table Cycle Sort Type B BJ 2025

Mobile screw compactor Pöttinger BJ 2019

Sorting/Cutting Table

A compact, effective and powerful system for the separation of light residues. The adjustable suction head can be mounted directly on a conveyor belt or above a star screen deck. The MM Air 22 air classifier is designed for maximum impact, ease of installation and reliability. The MM Air 22 air classifier has the following features: 22 kW highly effective suction unit with belt drive Built-in electric control panel Variable speed control Air flow rate up to 266 m³/min Large doors for easy maintenance and cleaning Reinforced fan wheel and suction chamber Universal conveyor belt attachment There can be two suction heads on the machine can be attached Vacuum head: Suction head suitable for a bandwidth between 800 - 1200mm Easy to assemble and stable while working 400mm air hose connection to MM-Air 22 Electric Suction Fan Unit: Length: 1850 mm Width: 1323 mm Heigh ...

TECHNICAL SPECIFICATIONS Manufacturer: Unknown Description: Ascending Conveyor Belt Wheelbase: 55,000 mm Belt width: 800 mm Drive power: 30 kW Horizontal conveyor length: approx. 25,000 mm Belt type horizontal: C-profile Conveyor length with pitch: approx. 30,000 mm Belt type with pitch: grid construction Discharge height: approx. 11,000 mm Hot-dip galvanized: yes Length of pavement: approx. 30,000 mm, on one side Outrigger: 1 pc A-supports Maintenance platform: Yes, drive station Distance between upper chord stations: 1,000 mm

Ruwac DS2420 G-B1 Industrial Vacuum Cleaner Manufacturer: Ruwac Model No.: DS2420 G-B1 Voltage: 400 volts Motor power: 4 kW 8.3 A Weight: approx. 100 kg DGUV until 2024 Suitable for sucking up more flammable dusts in zone 11 Cracks in the cover More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Very stable trough conveyor belt with support rollers. 2.5 kW powerful motor for heavy materials. The conveyor belt was most recently used in cable recycling. The conveyor belt has no recognizable damage. The length is approx. 5.0 m and the width is 600 mm. The conveyor belt is immediately available from the warehouse in Weimar/Thuringia. For more information, please contact BPS at Recyclinganlagen.info. Just contact us.

1 wastewater treatment plant for the treatment of industrial wastewater The wastewater load of approx. 136m³ / day from the albi fruit juice Production ranged from 2,000 mgO2/l to 8,000 mgO2/l Running time 24 hours, input approx. 5.6 m³/h, COD degradation up to 975 kg COD/day The complete wastewater treatment plant consists of the following components: A.) 1 free-standing company building to accommodate the 3 rotary lobe blowers an exhaust fan and control system S 7, in 5 control cabinets and 1 small control laboratory B.) 1 drain and measuring shaft, can be entered with stepladder inside of the operating building with 3 chambers for the regulation of the Equipped with Ind. flow meter from Endress & Hauser in DN50, max. effluent volume of activated sludge with solids content smaller than 1% with 0- 3 l per sec C.) 1 blower station with 3 sonically encap ...

Specifications: - Volume flow approx. 220 m³/h. - Dust class M - Connection socket 50 mm -Drawer - Pneumatic connection - Drive power 400 V / 1.3 kW - Space requirement W 1000 x H 1350 x D 500 mm - Weight approx. 120 kg

Electric Overbelt Magnet | Electric Magnetic Belt Separator reinforced series Factory overhauled (refurbished - used) with new bearing (spherical roller bearing) and new rubber conveyor belt Make: Wagner Magnets Type: 454-95/100-600 Conveyor belt width transverse: 1200 mm Conveyor belt width longitudinal: 1000 mm Conveyor belt distance: 300 - 400 mm Power consumption magnet: approx. 5.0 kW Drive: Bevel gear motor SEW Motor power: 3.0 kW, 400 V, 50 Hz Magnet (L x W x H): approx. 1240 x 950 x 600 mm Belt: Rubber conveyor belt EP 400/3 4+2 with T-profile (40 mm), new Machine weight: approx. 3200 kg Machine colour: RAL 6018 yellow-green Applications: Waste wood, waste paper and glass, mining, e-waste, commercial waste, foundry, household waste, coal-fired power plants, plastics, construction waste, sawmills, scrap processing, bulky waste, steel mills, cement and gravel  ...

hydraulic tipping tank or tipping bucket Price: 800,-p.pcs. + VAT reclaimable: R928 hydraulic tipping trailer, tipping wagon MAFI hydraulically tiltable by means of a manual hydraulic pump. Load capacity 2000 kg Overall height 2000mm Inner body dimension Br.1900mm Flat 900mm top 1450mm 2 pieces are to be handed in Because they have been stored for years, they are partly rusty or the paint is peeling off. Otherwise very good technical. Condition in my opinion see also photo of the cylinders easily convertible as a tipping container on a forklift (has been done before) unscrew the chassis weld on 2square tubes for fork mounting Unscrew the manual hydraulic pump with quick couplings and adapt it to forklift hydraulics It is best to visit and try it out for yourself. I had several at one of them the chassis was removed and the holder for forklifts was welded on, intended for wo ...

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!

A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible.

Technical specification, CBR A3, FEATURE VALUE, POWER 5.5 KW, CABLE DIMENSIONS 1-120mm, CUTTING SPEED 25 meters/min, LENGTH 1240mm, WIDTH 780mm, HEIGHT 1330mm, WEIGHT 480kg, cable stripping machine, CBR A3 cable stripping machine is specially designed to remove the outer insulating material from cables of all sizes, allowing the conductive material inside to be easily removed. This series offers excellent performance on steel armored cables (SWA), double steel armored cables, steel tapes, PVC coated cables, lead coated cables, thick rubber coated cables, nylon coated cables, low grade cables, TT cables and more. Specially machined blades with unique design enable cutting and stripping of cables of any length for a long period of time without the blades becoming blunt. All electrical and electronic components of CBR A3 series are Siemens brand. Our products are manufactured and certified  ...

Slightly used, technically flawless! Control: Simatic Tank capacity: 700l 1x Coolant pump high pressure: Flow volume 30l/min / 50 bar 1x Coolant pump low pressure: Flow volume 80l/min / 3 bar Fleece width: 390mm Connection: Voltage: 3x400V+PE/50Hz Power: 7.5kW Rated Current: 15A Pre-fuse maximum: 50A Dimensions LxWxH: 1700 x 1400 x 2100 mm Total weight empty: 650kg

Eichinger 2041.10 waste box van; Volume 750L; Load capacity 300kg; tilting; on wheels. Waste box wagon Eichinger 2041.10; capacity 750L; lifting capacity 300kg; tiltable; with rolls.

ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Tyre washing system for commercial vehicles Monsuna type AKS A4 incl. tank, control system, signalling system and contact loop for automatic operation, the washing zone is completely galvanised, water supply is completely integrated into the module frame, passage zone: 4000 mm long x 3100 mm wide (clear clearance width: 2900 mm), weight: approx. 5,000 kg (2 wash mod ...

Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible.