other machinery for waste disposal and recycling used for sale (395)

Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.

UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Manufacturer: Hammel Model: VB 950 DK NR 60 Year of Manufacture: June 2008 Weight: approx. 42 tons Operating Hours: approx. 6,000 hours Configuration: Mobile on crawler undercarriage Paint Finish: RAL 3020 (red) Refurbished: 2025 Refurbishment Work Carried Out in 2025 - New main gearbox installed - Hydraulics replaced (except main pumps) - Full hydraulic system flush completed - Tank cleaned and all oils changed - Fuel filter replaced - Partially repainted Drive / Engine - Engine: Caterpillar C-18 - Power Output: 522 kW / 710 PS - Idle Speed: approx. 700 min-1 - Working Speed: approx. 1,900 min-1 - On-Board Voltage: 24 V Shredding Shafts - Rotor Diameter: approx. 870 mm - Shaft Configuration: 6-part, 8/8 discs (waste/bulk) - Working Width: 2,445 mm - Shaft Speed (automatic mode, no load): approx. 36 min-1 Discharge Conveyor - Belt Width: 1,400 mm - Belt Type: Cleat belt, s ...

Manufacturer: Recuperma Model: RECU 3 Year of Manufacture: 2014 Type of Machine : Scrap Baling Press Technical Specifications - Bale Size: approx. 400 x 400 mm - Main Drive: 2 x 90 kW (400V, 50Hz) - Overall Dimensions (L x W x H): 6950 x 8900 x 5500 mm - Press Box (open): 2300 x 1500 x 1300 mm - Total Weight: approx. 77.5 t (without oil) - Color: Blue Hydraulic System - Operating Pressure: 315 / 335 bar - Hydraulic Power Unit: Recuperma - Control Valves: Moog - High-Pressure Pump: A4V Axial Piston Variable Pump - Tank Volume: approx. 5000 litres hydraulic oil - Oil Grade: HLP 46 - Auxiliary Drive: approx. 15 kW cooling and filtration Cylinder Configuration - Pre-compaction Cylinder: diameter 280/200 mm x 2400 mm stroke - Intermediate Compaction Cylinder: diameter 320/250 mm x 955 mm stroke - Final Compaction Cylinder: diameter 380/280 mm x 2325 mm stroke - Door Cylinder: diamete ...

Briquetting press Type: BrikStar 150–19 Manufacturer: BRIKLIS Year: 2023 Intended for medium-sized operations, which presses wood waste, straw, hay, paper and other materials into briquettes with a diameter of 65 mm, while offering an output of 130-160 kg/hour (depending on the material) at an input of 13.5 kW, while the version with a hopper of 3 m³ (type 19) weighs around 1340 kg and is equipped with automatic regulation. parameters: Output: 130–160 kg/hour (depends on the processed material) Diameter of briquettes: 65 mm Electrical input: 13.5 kW Suitable materials: Wood dust, sawdust, straw, hay, paper, sedge, poppies, energy plants. Operation: Medium operations, single-shift and multi-shift. Features: Hydraulic press, modern management, automatic quality control, sensor min. levels, possibility of adjustments. Type "19": The designation "19" refers to the version w ...

Manufacturer: PAAL Model: KONTI 700 G/S/K Year of Manufacture: 2011 Type of Machine :Baling Press Key Features - Cross-lacing system (optionally switchable) - Oil cooling system - CE marked Find more here - / Contact us at -

Manufacturer: Herbold Year of Manufacture: 2020 Type of Machine : Bale Opener CE Certified Find more here - / Contact us at -

This complete cable recycling plant has a capacity of 1000 kg/h and is designed for the granulation and separation of electric cables, recovering both copper and plastic materials. Complete Line Components - Pre-shredder: Tecnoecology TG 1250, 55 kW - Blade mill 600 mm: Tecnoecology, 37 kW - Zig-zag separation plant: Tecnoecology - Cell mill: Tecnoecology T25/45, 55 kW - Separation table: Tecnoecology TV 500 - Vibratory screen 600 mm for separation of ground plastic and fine copper - Separation table: Tecnoecology 300 for fine copper recovery - Dust filter: 72-sleeve type - Pneumatic transport fans - General electrical control panel Find more here - / Contact us at -

Fully refurbished cable granulator line available for immediate sale. This complete recycling system includes a pre-crusher (shredder), magnetic separator, granulator with new knife sets, air extraction unit, and a new control cabinet. The line produces approximately 150 kg of granules per hour with very good separation results. Operated for approximately 20 tonnes of cable only. The machine was built between 2006 and 2021, depending on the machine part. Machine 1 - Granulator - Manufacturer: Engin Plast (EP) - Type: BA 40.30 - Power: 11 kW - Voltage: 400V / 50 Hz - Year of Manufacture : 2006 Machine 2 - Pre-Crusher / Shredder - Manufacturer: Wagner - Type: WS 15 - Driving Power: 15 kW - Weight: approx. 1,400 kg - Voltage: 400V / 32A / 50 Hz - Year of Manufacture : 2007 Machine 3 - Magnetic Separator - Manufacturer: Magnetica Torri - Type: NPM410-050-040 - Weight: 120 kg - Year:  ...

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

For sale: a complete waste recycling plant, fully equipped with automated sorting,shredding, separation, and material recovery systems. Overall Process Summary 1. Feeding and battery detection (WeSort AI) with pre-shredding and screening 2. Ballistic separation into flat fraction, rolling fraction, and fines 3. Multiple NIR sorting stages (P2000 / PV2000 / P2800) for PVC, EBS, Wood, PP/PS/PE/EPS 4. X-Ray mineral sorting, ISS Eddy Current separation, Zig-Zag air classification, overband magnets, flip-flow screening 5. Post-shredding with Lindner Komet and SRF dosing with secondary shredding 6. Final SRF/EBS discharge with ferrous and reject handling 7. Manual sorting cabin with dust extraction (Schuko filter system) 1. Feeding and Pre-Treatment - Feeding crane - Feed bunker - Intermediate feed conveyor and screen feed conveyor - Screen and screen discharge conveyor - Analysis  ...

Manufacturer: Formeco Model: DV25 AX Machine type: Cyrel solvent recycling machine Year of manufacture: 2000 Condition: Used Find more here - / Contact us at -

Find more here - / Contact us at -

This used PY-D continuous distillation unit converts waste engine oil, pyrolysis fuel oil, and heavy crude oil into non-standard diesel fuel with a high yield of 80–90%. The horizontal-type reactor operates at normal pressure using a hot-air heating method and cycle-water cooling, making it a reliable, low-maintenance solution for industrial waste oil recycling. Emission control is handled by a new DE-sulfurization smoke scrubber system. Full Technical Specifications - Equipment Model: PY-D - Suitable Raw Materials: Waste engine oil, Pyrolysis fuel oil, Crude oil - Structure: Horizontal Type - Daily Capacity: 5 – 6.5 MT - Work Pressure: Normal Pressure - Oil Yield: 80% – 90% - Power Consumption: 18 kW/H - Cooling Method: Cycle water - Condensers: 4 pieces of Vertical condensers - Emission Treatment: DE-sulfurization Smoke Scrubbers - Heating Method: Hot Air - Type of Installation ...

Manufacturer: Horstmann Year of Manufacture: 2005 Decommissioned : 2010 Type of Machine : Drum Screen Total Transport Weight : 33,000 kg (33 t) Technical data : - Diameter: 2450 mm - Length: 10920 mm - Screening length: 9090 mm - Square perforation: 60 x 60 mm - 2 x SEW geared motors Find more here - / Contact us at -

Manufacturer: Huber Model: Strainpress SP 290 Type of Machine : Screw press separator Condition: Used, fully functional Included Spare Parts and Accessories - Control cabinet (included) - Digital documentation (included) - Used screw shaft screening zone, conical 288/204 SW1735, including sleeve - New screw shaft press zone 198 SW1678 - New screen basket Strainpress 290 200/2 L810 RV 2-3.42 press zone - 4 x new spherical roller bearings 22313EAE4 (d65 D140 W48) - 2 x new piston rings 100/120x12 - Small parts kit: shaft seals, spacer rings, grease cartridges, shaft keyways, bolts, brass nuts, bearing puller tool Find more here - / Contact us at -

CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48") - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - / Contact us at -

Manufacturer: Bonfiglioli Type of Machine : Scrap shear This machine has sustained fire damage. The main structure and the cutting unit remain intact, including the knife, cutting cylinder, and quick-opening function. Find more here - / Contact us at -

Manufacturer: Kowin Model: 232 Machine 1 : - Operating hours 0 - Year of Manufacture: 2024 Machine 2 : - Operating hours the machine donsen´t show operating hours . The machine was only doing g 10-15t of regrind per month from 2011 till 2024 - Year of Manufacture: 2011 Find more here - / Contact us at -

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Manufacturer: HSM Model: VK 5512 Year of Manufacture: 2018 Pressing force: 560 kN Find more here - / Contact us at -

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...