Numerically Controlled Machining Centres used for sale (150)

Key data: 630 mm, 400 mm, 500 mm

Chiron FZ 18 W, NC machine: 5-axis machine Interference circle diameter [mm]: 630 with variaber Wz alternating plane Plate size: Workpiece changing device 0 / 180° weight-dependent, Self-regulating thanks to self-learning speed control Transport load per side Ø - max. 400Kg with stainless steel centre partition Clamping area 2 x 940 x 470mm² with threaded and fitting hole grid: M16x Ø 15H7x50mm Workpiece change time: approx. 3.7sec. weight-dependent, Self-regulating thanks to self-learning speed control Workbench: Two-axis NC rotary table Type ATU 200/AWU 160, Fabr. PEISELER Face plates Ø 180mm with centering hole A50 + Ø 012 Fixing pin Ø 16H7 and 4x M10 in bolt circle 104.8 Center height 174mm with horizontal axis of rotation Dimension to upper edge of face plate with vertical axis of rotation 263mm Sub-range 5, axis 360° continuous, 4th axis 0-90° S ...

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08K S Magnum Work table: length 770mm, width 290mm (clamping surface) Rigid table with chip tray for optimum chip fall during wet and dry machining. With raster drilling pattern: M16 x diameter 15 H7 x 50mm Rapid traverse: 75m/min in X, Y and Z axis Max. speed [rpm]: 3000 Dimensions/Weight: Length [m]: 2.308, Width [m]: 1.405, Height [m]: 2.447 Total weight [Kg]: 3400 Electronics: Control type: Siemens CNC control 840D (PCU 50 / NCU 572.3, 6 measuring circuits, 1 channel) incl. 10.4" TFT color screen/full keyboard OP010S Control Panel Logic Windows NT/XP Machine connection: Voltage [V]: 400 / 230 + 6% / -10% - 50Hz/N/Pe Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 14kVA

OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment

Key data: 2 mm, 425 mm, 400 mm

Machining Center (Vertical) CNC TYPE: SW BA25 Control: Siemens 840 C Travel X/Y/Z: 2 x 600 or 1 x 1,800 / 425 / 400mm Main spindle: SK40 / 7,500 rpm /106 Nm / 14kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 KG Equipment: Single or two-station with shuttle operation Left side with controlled 4th axle and hydraulic double clamp Right side 2x hydraulic double clamp Separate hydraulic unit for increased clamping pressures under manual clamping Can be reclamped to program-controlled voltage via central hydraulics Conveyor Coolant device with gap filter and high-pressure pump for internal coolant supply Prepared for Renishaw touch probes

The machine is in good technical condition, after prior agreement it is possible to test it. X 750mm, Y 500mm, Z 600mm. Spindle speed 10 thousand, tool magazine 22 positions, chip conveyor, cutting fluid filtration, iTNC 530 control system.. double machining center (3 axes and 5 workplace axes) AXA DBZ with rotary table SRTA2-300

Key data: 100 mm, 500 mm, 480 mm

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fo ...

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 500 mm

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

The machine is in good technical condition, after prior agreement it is possible to test it. Fully functional, still in operation in very good condition. Year of commissioning 2010 - it ran in single-shift operation. Direct measurement in all five axes. Speed 15000, the spindle is in excellent condition, cooling through the spindle center, water and air. ISO40 taper, tool magazine 48, BLUM LASER tool probe brand new, Renishaw workpiece probe. New chip conveyor. HEIDENHAIN iTNC 530 system with purchased kinematics. The machine has always been serviced by an authorized service. To this day, the parameters of the new machine do not differ from the parameters of our machine. By agreement, many accessories can be sold with the machine.

Key data: 830 mm, 630 mm, 630 mm

Year of manufacture 2004 Heidenhain 530 (MC422) Spindle hours approx. 17500 32 Fold Tool Changer Working area 830 x 630 x 630 mm Feeds 15000 mm/min Rapid traverses 30000 m/min Tool holder Motor spindle 12000 rpm IKZ, chip conveyor, el. Handwheel, Heidenhain Button, Blum Laser, Rinsing device, filter system Weight approx. 9000 kg

BAZ DMU 60E BJ 1998 3 axle

Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark

Travel (X / Y / Z) 1,524 mm / 660 mm / 610 mm Table size 1,676 × 660 mm Table load Up to 2,000 kg Spindle holder SK50 DIN 69871 Speed range up to 8,000 rpm Spindle power 22 kW continuous power (30 min. to 26 kW) Coolant by spindle Number of seats standard: 30 Iiebtfbewt N Nhj Tpmsc Tool weight max. 15 kg Tool length max. 300 mm Tool diameter max. 125 mm (if the adjacent space is empty), otherwise 75 mm Rapid traverses (X/Y/Z) 30 / 30 / 24 m/min Machine weight approx. 10,000 Control Hurco WinMax / Ultimax Installation area (L×W×H) approx. 5,600 × 3,900 × 3,300 mm

Key data: 630 mm, 620 mm, 710 mm

ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

X,Y,Z Travels 630,530,465 mm Spindle speed 18.000 rpm Tool holder SK40 Number of tools 32 Controller Heidenhain iTNC 530 With Tool and workpiece measuring probe With chip conveyor

Key data: 1660 mm, 510 mm, 510 mm

For sale: Mazak vertical machining center type VTC-20C with a Mazatrol M Plus controller. X, Y and Z axis movement is 1660 x 510 x 510 mm. Table size. 2000 x 510 mm. Speed range 40 -7,000 rpm. Spindle holder ISO-40. The machining center is equipped with cooling by the spindle. Tool changer with 2 x 24 positions. The machining center is still in good condition. Still to be seen under power, intermediate sale reserved

Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle

Key data: 835 mm, 510 mm, 510 mm

Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.

Key data: 800 mm, 650 mm, 500 mm

CNC Vertical Machining Center MIKRON VCP 800 W With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 800 Y 650 Z 500 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM Laser ) 3 D Probe Infrared Renishaw Conveyor Coolant Setup 4 Height Adjustable Machine Shoes Operating instructions

"The BMV60+ redefines the standards for precision machining! The rigid structure, small footprint and precise spindle ensure consistently high quality of performance. The high speed and feed rate meet the criteria necessary for cost-effective processing." "The arm tool magazine uses variable pocket coding. Linear guideways, variable speed AC spindle drives, and a digital drive CNC system are some of the standout features of this BMV60+ series machining center." Unique features: Rigid column technology Modular construction CAE-based optimal structural design for thermal stability "T20 - 20 Tools Roof/Carousel Magazine Carousel Magazine Designed to adapt to different types of coolant and chip systems High-quality spindle on precision bearings eliminates vibration during heavy cutsModel BMV-60 Travel of the X-Y-Z axis 1050 x 610 x 610 mm Spindl ...

Table Size 1700 x 710 mm Headstock Travel 810 mm (Z-axis) Height of the machine 4000 mm Table longitudinal displacement 1600 mm (X-axis) Table transverse travel 910 mm (Y-axis) Spindle to tabletop 150 - 960 mm Distance from the floor to the table 1150 mm Distance between spindle center and column front 825 mm T - Groove No. 5 T - Groove Size 18 mm T - Groove Pitch 125 Max. load on the table 2000 kg Spindle cone BT-40 Hourly spindle speed 6000 rpm Footprint (L x W) 4300 x 3400 mm Weight of the basic machine 14500 kg Total connected load 40 kVA (basic standard machine), 50 kVA (basic standard machine with high power

Key data: 1660 mm, 510 mm, 510 mm

Fully functional Used CNC Machining Center MAZAK VTC-200 C Year of manufacture 2001 The machine has a Fusion 640M control system and is equipped with a chip conveyor, partition for pendulum machining and much more. Location of the machine: 97070 Würzburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel

x-travel 1,035 mm y-travel 560 mm z-travel 510 mm CNC control SINUMERIK 810D SIEMENS Table size 1200 x 560 mm max. table load 1000 kg Spindle holder SK 40 Spindle speeds 8,000 rpm Drive power - spindle motor 13 kW Infinitely variable feed 20,000 mm/min Rapid traverse 25 m/min Tool changing device 20 pos. Uiwzmu3B22 Coolant Setup Operating voltage 400 V Total power requirement 17 kVA Machine weight approx. 4.1 t Dimensions approx. 2.55 x 2.30 x 2.25 m Chip conveyor 3.80 x 0.90 x 1.55 m - Spindle ON: 5324 h - Control: SIEMENS Sinumerik 810 D - electr. Handwheel -Conveyor - Coolant device

Key data: 710 mm, 610 mm, 660 mm

Mazak FH 5800 with 10 Pallet Palletech Horizontal machining centre with Palletech CNC control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg X-axis travel 710 mm Y-axis travel 610 mm Travel Z-axis 660 mm Indexing of the table 360 x 1° Spindle taper DIN 69871A Spindle speed 35 - 15,000 rpm Magazine capacity 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Fully functional used Horizontal CNC Machining Center MAXIA Matsuura H. Plus 405 PC-12 Year of construction 2009 Fanuc Control 30i Tool magazine for 400 tools Pallet storage for 12 pallets 2 pieces of pallets 500mm x 500mm included 10 pieces of pallets additional for 3.000,- € / piece Glass scales Spindle up to 10,000 rpm, last spindle replacement July 2019 Spindle Holder SK40 DIN 69871 Big+ Spindle motor 36/24 kW Max. torque 254 Nm to 900 rpm Knoll coolant system Scraper Belt Chip Conveyor 24l/min at 70 bar, tank capacity 1300 liters Regular maintenance by the manufacturer Matsuura You can find more information in the pictures or ask us. Location of the machine: 76530 Baden-Baden The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Key data: 2300 mm, 800 mm, 600 mm

Control: Heidenhain iTNC 530 Total travels X-axis 2,300 mm Y-axis 800 mm Z-axis 600 mm Fixed table working area: X-axis 925 mm Y/Z axis 800 / 600 mm Clamping area 1,400 x 750 mm Rotary table travels: X-axis 780 mm Y/Z axis 800 / 600 mm Clamping surface Ø 800 x 630 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed Kessler motor spindle: 50 – 12,000 rpm Accessories - Handheld operator - IKZ with screen filter system 500 liters -Conveyor - 6th axle prepared - Blum Laser - 2x suction - Machine hood

SW BA600-2 CNC machining center with swivel table / built in 1999 / Siemens 840C control / incl. chip conveyor, coolant lubricant preparation and extraction

Double-spindle machining centre in 5-axis design Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle spacing 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions Tool holder HSK 63 CNC control Siemens 840D 1 x Tool breakage detection 2 x tension bridge support H75 mm 2 x tension bridges 5th axle Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x Drill Head Indexing 2 x Tool Planing System Control 2 x Upgrade Kit Torsion Compensation A/U Axis

BAZ Spinner VZ 750 Year of construction: 2011 Hours : 6910 Spindle hours: 5114 Control Type: Fanuc OIMD-Alpha-Drive-HV-Technology Accessories: Chip conveyor Equipment: SK 40 Tool Pack

Key data: 900 mm, 600 mm, 500 mm

1 gebr. Portales Machining Center Make: Depo Model: Depo-Jet 906 Year of Make: 2004 Control: Heidenhain iTNC 530 Shuttering hours: approx. 32200 h Spindle hours : approx. 4900 h Spindle replacement in 2022 X axis 900mm Y axis 600mm Z axis 500mm Spindle nose to table nose 150-650 mm Table size 1100 x 600 mm Speed (BUILD-IN) 24000 Power 29 KW Mounting HSK-A63 Feed max. 1-20,000 mm/min X.Y.Z Eilagng rapid traverse 20,000 mm/min (0%, 30%, 50%, 100%) Magazine 20 tools Max. tool dia. Ø35 Max. tool length 220 mm Max. tool weight 7 kg Total power 47 KVA Machine (L x W x H) 3,010 x 3,716 x 3,100 mm Machine weight 11,000 kg XYZ Drive Protection Torque Limiting Clutch Direct Oil cooler ±1°C of ambient temperature in the workshop Position accuracy (X/Y/Z) 0.004 mm Reproducibility (X/Y/Z) 0.002 mm Accessories: Electronic handwheel Tool package HSK 63 Do ...

CNC Machining Center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of Make: 1990 Control: FANUC O-M Travels: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis) 25 – 325 mm Distance between spindle nose and pallet table (Z-axis) 125 – 620 mm Rapid traverse movement: 24 m/min Feed movement up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed Actuators FANUC AC X/Y-Axis Model 5 Z-Axis Model 10 Main spindle revolutions: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet Indexing Angle: 7.5 degrees Indexing accuracy: +/- 2 sec. Repeatability: +/- 1 sec. Clamping force of the pallet: 3,400 kg Max. workpiece weight: 150 kg Automatic Tool Changer: Number of Tools 30 Tool change 2.5 sec. Collets Clamping Time 7 sec. Tool diameter max.: 110 mm Too ...

Dear Ladies and Gentlemen, we currently have a Mazak VTC 20 B, for sale. It is fully functional and can be visited at any time.

Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck

Key data: 450 mm, 300 mm, 270 mm

Manufacturer: Kira Type: PC-30 EA Condition: very good Year of Make: 2008 X-axis: (mm) 450 Y-axis: (mm) 300 Z-axis: (mm) 270 Spindle speed max.: (rpm) 10,000 Max. thread slitting: (rpm) 5,000

Key data: 1000 mm, 950 mm, 1000 mm

Okuma MA-600 HB Space Centre Control OSP E 100M Pallet dimensions 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Travel of the Z-axis 1000 mm Indexation of Table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in Tool Magazine 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Year of construction: 2009 CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp ...

Matsuura Horizontal Machining Center CNC control Matsuura G-tech 16i Pallet table size 500x500 mm Number of pallets: 6 Table load 400 kg Spindle speed 15000 rpm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Key data: 1000 mm, 560 mm, 800 mm

Inv. Num. : 3714 Type: MH 1000 C Producer: MAHO Created: 1991 Parameters: Control system: Philips CNC 432 Hours: 62345 h Work table length: 1150 mm Work table width: 800 mm Tool magazine: 24 pieces Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 3400 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 800 mm Cone: ISO 50 Maximum tool weight: 800 kg Machine weight: 7.3 t Equipment: 3 tool holders

Key data: 750 mm, 800 mm, 850 mm

Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale

Table size 900x400 mm X Travel 750 mm Y, Travel 450 mm Z Travel 450 mm Spindle speed 12.000 rpm Controller Siemens 840D Sl Spindle taper SK40 Number of tools in magazine 24 Can be tested under power

Processing Manafacture: Matsuura Type: H Plus 405 PC6 Year of construction: 2003 CNC control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-fold pallet changer Tool magazine: 120-fold 4. Axis Knoll high-pressure system Internal cooling 70 bar

4 Axes CNC Machining Center for working of bars of aluminium, PVC, light alloys in general and steel pieces up to 2 mm X AXIS (longitudinal) (mm) 4.000 Y AXIS (transversal) (mm) 270 Z AXIS (vertical) (mm) 420 A AXIS (electrospindle rotation) 0° ÷ 180°

Key data: 1600 , 600 , 500

Unisign Univers 4000 (UV 4000) Chassis CNC Vertical Machining Center Table size (2) 825 x 625 mm. Number of pallets: 2 Travel x-axis 1600 mm. Travel y-axis 600 mm. Travel z-axis 500 mm. 4. Axis (rotary table) NC Maximum table load 600 kg Number of tools in the magazine 51 pieces. Maximum spindle speed 12,000 rpm. Tool holder DIN 69871A CNC control Fanuc 21i MB If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a complete overview of our inventory.

Yasda YBM 900N CNC Precision Horizontal 5 Axis Machining Center CNC control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Number of pallets 5 workpiece diameter x height 1400x1200 mm Travel X-Y-Z axis: 1800 mm A-axis (table inclination) +20 / -110 Travel of the B-axis 360° Spindle cone DIN 69871/50A Spindle speed 10,000 rpm Tool storage capacity 240 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

X Travel 1100 mm Y Travel 610 mm Z Travel 610 mm Spindle speed 10.000 Rpm Controller Siemens 840 Dsl