machines and plants for process engineering used for sale (7,488)

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible.

An oil-injected stationary compressor CompAir is available. Stages: 2, Air flow rate: 17m³/min, Max. operating pressure: 12bar, Machine dimensions X/Y/Z: approx. 3300mm/1800mm/2000mm, Weight: approx. 3900kg. Documentation available. An on-site inspection is possible.

Dissolver Niemann KDV 491-50 Power 37 kW Speed range 300-1400 1/min Niemann Speedcontrol All functions via control panel new jaws electric container collet Control cabinet

Dissolver Niemann KDV 241-25 Power 18 kW Speed range 290-1650 1/min Niemann Speedcontrol All functions via control panel new jaws electric container collet Control cabinet

Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical a ...

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: Siemens, Sirius Contactor Auxiliary Switch Block Power Contactor -Type: 3RT1045-1AL24 3ZX1012-0RT04-1AA1 -Number: 1x contactor available -Cardboard dimensions: 210/150/H80 mm -Weight: 1.9 kg

A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible.

Manufacturer: WILD INDAG, now part of the SPX Flow Group Type: INO1 CC 160 VT TS100 Year of Make: 2010 Working Principle: Rotary Lobe Pump Max. pressure: 16 bar Drive: SEW-Eurodrive 5.5 kW geared motor Most recently used in butter production Version for food applications Condition: very good

Drying cabinet vacuum tray dryer, tray dryer, Zschocke 630 liters I offer a vacuum drying oven from a liquidation. The drying oven is made entirely of stainless steel (food-safe) on the inside and allows drying under vacuum up to 1 mbar (depending on the drying material and connected pump). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Technical data: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke A ...

A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible.

A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Offered is a Ruma cleaning centrifuge system with cooling unit and pump system for cleaning cooling lubricants, grinding oils, emulsions, wash water and process fluids. Max. achievable cleanliness level: approx. 1µm, suitable media: oils, emulsions, cooling lubricants, wash water, process fluids, max. rotor speed: 3620rpm, rotor diameter: 310mm, max. solids capacity: 12kg, main motor power: 2.2kW, filter aids: not required, separation principle: solid-liquid separation by centrifugal force. Machine weight: 400kg. Documentation available. Inspection possible by arrangement.

Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifier, pipe connection: Ø 108mm, additional connection: Ø 168mm, main module dimensions: approx. 2400mm/1350mm/2360mm, hopper width bottom/top/center: approx. 1323mm/1896mm/1546mm, inclination: approx. 1.1°, function: solid-liquid separation by sedimentation, application: process water, wastewater, wash water, liquids containing settleable solids, separation principle: sedimentation with lamella packs/inclined plates, flow direction: horizontal, lamella packs: available, sedimentation hopper: available, equipped with multiple basin modules, lamella clarifier sections, sludge hopper, upper pipe distributor, connection nozzles and flanges, lift ...

Powder cyclone separator, VA

Process chiller / chiller air-cooled, Type: TAEevo Tech 081 P3-20 – 22.5 kW Refrigeration Machines, MTA S.p.A. Chiller, chiller, chiller TAEevo Tech 081 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 140 ltr. , built-in P3 Circulation pump and winter control (condenser pressure control down to -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 22.5 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 3.82 Available pump pressure (bar) 2.69 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 12.04 Max. current (A) 20.2 Starting Current Circuit (A) 114.77 Protection class: IP54 Dimensions: Length (m ...

Process Air Cooler/Chiller/Chiller Air Cooled, Type: TAEevo Tech 101 P3 – 27.5 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 101 P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 pump. Optional equipment: open AD kit Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 27.5 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 2.54 Available pump pressure (bar) 2.54 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 14 Max. current (A) 25 Starting Current Circuit (A) 123 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 637 Connection Rp 1"1/2  ...

Oil cooler, air-oil cooler, heat exchanger unused. Manufacturer: SEW Type: OAC1 50-710 Year: 2020 Permissible. Temperature: 90 °C Capacity: 42 l Cooling capacity at 40°C air / 70 °C oil: 27.7 kW 380 V Pump KRACHT KF 50 68.2 l/min at 1500 rpm 4 kW Fans 1.1 kW 940 rpm Dimensions approx. 2100 x 1500 x 1200 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

General SKU900WP038 LocationBarneveld CEcheck MakeLAUDA Pressure Working pressure10 Bar Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity20kW Electric capacity22,7kW Temperature+5/+120°C With pumpSpeck-pumpen Type: MZ-40-1.0003 Motor2kW, 400V, 2830rpm (EX) MaterialStainless steel 1.4541 (321) With jacketcheck General TypeIT HW 350-Ex Mach.No.B 17 276 Year of construction2003 Mounted on framecheck Floorspace1,7x0,7 m Total height1,55 m Weight400 kgTemperature control unitsNew arrivalsLaudaHeat exchangers > Temperature control unitsNew arrivalsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

General SKU900WP093 LocationBarneveld CEcheck Specified Features - Temperature control unit Temperating machinecheck Heating medium:R134A With coolingR134a Motor230 V. MaterialMild steel With jacketcheck General MakeHaake TypeUWK 90 Mach.No.003-3978 Mounted on wheelscheck With switchcheck Floorspace0,4 x 0,7 m Total height0,65 m Weight100 Extra Specifications231 V, 50 Hz, IP20, CE certifiedTemperature control unitsThermo HaakeHeat exchangers > Temperature control unitsBrand > Thermo Haake What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU900WP034 MakeLAUDA TypeIT HW 350-Ex Mach.No.B 17 275 Year of construction2003 Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Heating capacity20 kW Electric capacity22,7 kW Temperature120°C With jacketcheck General Mounted on framecheck LocationBarneveld Floorspace0,6 x 1,6 m Total height1,6 m Weight800 kgTemperature control unitsNew arrivalsLaudaHeat exchangers > Temperature control unitsNew arrivalsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU900WP080 MakeDeltatherm (D) TypeWP 412/15 Mach.No.7/8032 Year of construction2001 Pressure Working pressure8 Bar Main Features Heating (medium)Electric Capacity12.8 KW Temp.150 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Electric capacity12,8 kW, 400 V. With coolingcheck TemperatureMax 150°C With pump40 ltr/min With jacketcheck General LocationBarneveld With switchcheck Floorspace0,3 x 0,7 m Total height0,65 m Weight125 kgTemperature control unitsDeltathermHeat exchangers > Temperature control unitsBrand > Deltatherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

A used replacement stage type VML 60 is offered, see pictures. The compressor stage is in very good condition, see pictures. If you have any questions, please feel free to contact us.

Good used for sale.

Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, year of manufacture: 1979, max. operating pressure: 15bar, air flow rate: 1400l/min, power: 15HP. An on-site inspection is possible.

For sale is a high-quality EDUR magnetic drive pump type LBM 602 C160L from 2021. The pump is in a well-maintained used condition and comes from an industrial plant. The EDUR LBM series is characterized by its hermetically sealed magnetic coupling and is suitable for demanding applications in process engineering, refrigeration, chemical and industrial technology. The multi-stage design achieves high conveying capacities and pressures. Technical data Manufacturer: EDUR Pumpenfabrik GmbH, Kiel Model: LBM 602 C1601 Year of construction: 2021 Factory No.: 461440 Flow rate (Q): 19.13 m³/h Lifting height (H): 13 m Permissible operating pressure: 25 bar Medium temperature: 20 °C Pump speed: 1450 rpm Weight pump: 83 kg CE marking available Engine Manufacturer: Lammers Power: 7.5 kW Voltage: 400/690 V Frequency: 50Hz Degree of protection: IP55 Effi ...

Fristam Centrifugal Pump FZ 27/A – Stainless Steel Food Pump – 40 m³/h NEW - never used before Manufacturer: Fristam Pumpen GmbH Type: FZ 27/A Year of manufacture: 2023 Condition: Very good / as good as new Application: Food, beverage, dairy, pharmaceutical and cosmetics industries For sale is a high-quality hygienic stainless steel centrifugal pump from Fristam. The pump is ideal for the gentle and reliable transport of liquid food and media in hygienic production environments. Technical data Make: Fristam Type: FZ 27/A Year of construction: 2023 Flow rate: up to 40 m³/h Lifting height: 32.5 m Speed: 1,450 rpm Material: Stainless Steel Hygienic design for food applications Robust industrial quality "Made in Germany" Pros ✔ Hygienic design for CIP cleaning ✔ High operational reliability and long service life ✔ Suitable for milk, be ...

Manufacturer: Gericke Model No.: GAC130 Year of construction: approx. 2011 Machine number: unknown Type: Volumetric Dosing Device Stainless steel version Speed control via frequency converter Last Use: Powdered Milk Condition: used, fully functional (workshop tested)

Data from the nameplate: Type: MM 1252 AV Item No.: 1000805015 Voltage: 250/300 V Frequency: 50/60 Hz Flow rate: approx. 100 m³/h Final pressure: 100 hPa (≈ 0.1 bar absolute) Year of Make: 2010 Made in Germany