machines and plants for process engineering used for sale (7,696)

The Combi-Pack CW 500 – S is a packaging machine used for combining and packaging products in various industries. Here´s a general description and specifications for the Combi-Pack CW 500 – S: Machine Description: The Combi-Pack CW 500 – S is a versatile and efficient packaging machine designed for high-speed packaging applications. It incorporates advanced automation and control systems to streamline the packaging process and increase productivity. The machine is built with robust construction and precision engineering to ensure reliable and consistent performance. Specifications: 1. Packaging Speed: The CW 500 – S offers a high packaging speed, typically capable of packaging up to X products per minute (specific speed may vary based on product size and characteristics). 2. Product Compatibility: The machine is suitable for packaging various types of products, including bu ...

Manufacturer Mathis Year of construction 2005 Roller applicator BA RRC 15004” Infrared dryer IR 5104” Find more here - / Contact us at -

They were used to package bicycle accessories Find more here - / Contact us at -

Continuous mixer: Three shaft mixer Manufacturer: Axmann Model: TMS 30 - 4000/2000 Year of construction: 2015 Output: 30t/h Essential sales inventory: - Three shaft mixer - Electrical control - Pump/resin/hardener system - Feed shaft - Resin/hardener container/storage IBC - Spare parts/inverters etc. Reason for the sale, mixer was too small for our requirements, new foundry is being planned. The mixer was replaced with a larger mixer last month. C Find more here - / Contact us at -

2019 DN200-DN600 Hydraulic function test bench DN200-DN600 (built in 2019) shown below. The system is currently in use and is in perfect condition. Service description TP Pump (1) E-Motor: 315 kW Pump max. liter capacity: 41,833 l/min Pump min. liter capacity: 13,944 l/min Max. operating pressure 25 bar Nominal discharge head 28 meters NKG Pump (2) E-Motor: 315 kW Pump max. liter capacity: 16,833 l/min Pump min. liter capacity: 5,611 l/min Max. operating pressure 16 bar Nominal discharge head 80.7 meters Container Volume: 11400 liters Permissible pressure: - 0.5/10 bar Min pressure during operation: 1 bar Max. operating pressure: 5.5 bar Medium: Drinking water without additives Min. max. temperature -10/50°C Permissible load cycle 1000 The pumps are operated by means of a frequency converter. This enables speed control from 500 to 1500 rpm. The pumps can be switch ...

Berstorff ZE 90A x 36D compound extruder Dynamische Tragzahl: 633 kN(Dynamic Load Capacity) Theoretische Lebensdauer bei 120 bar und 300 l/min: 40,000 h(Theoretical Lifespan at 120 bar and 300 l/min) (Siehe Lebensdauerdiagramm, Punkt 8.3.4)(See Lifespan Diagram, Point 8.3.4) Anzahl der Vollzylinder (4 D): 1(Number of Full Cylinders (4D)) Heizleistung pro Zylinder: 9.2 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (4 D): 2(Number of Open Cylinders (4D)) (1x Füllzylinder 4D unbeheizt)(1x Fill Cylinder 4D Unheated) Heizleistung pro Zylinder: 6.8 kW(Heating Power per Cylinder) Anzahl der Vollzylinder (6D): 2(Number of Full Cylinders (6D)) Heizleistung pro Zylinder: 18.4 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (6D): 1(Number of Open Cylinders (6D)) Heizleistung pro Zylinder: 16.0 kW(Heating Power per Cylinder) Anzahl der Kombizylinder (6D): 1(Numb ...

2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25´C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pr ...

The EWAB TS190 is a cutting-edge automated production system designed to streamline manufacturing processes while incorporating advanced laser technology. This versatile machine is equipped with a dedicated laser cell, enhancing its capabilities for precision cutting, engraving, and material processing. The integration of robotics, automation, and laser technology makes the EWAB TS190 a reliable solution for a wide range of industrial applications. Find more here - / Contact us at -

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -

Dissolving station for copper cyanide The dosing system was designed according to drawing no. A10690 for the preparation of calcium cyanide and copper cyanide solution. The tank has a volume of approx. 1170 litres and is filled with water via an angle seat valve and with beads/scales/flakes via a feed screw. The dilution water is filled via a solenoid valve and a downstream angle-seat valve for volume adjustment. A spray nozzle in the aeration and deaeration dome prevents vapours from escaping when filling the tank. The water supply is shut off by a ball valve and the flow rate is adjusted by an angle seat valve. The extraction is switched on or off via the control unit. The feed screw first conveys the dry material into a two-stage shredder. From there, the dry material enters the container. The quantity of dry material conveyed is regulated via a slide valve on the feed screw. A su ...

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -

1994 Niemeyer RWE 13 – SF 7/002 D Shaft manufacturing plant Find more here - / Contact us at -

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - / Contact us at -

Metal 3D Printing Concept Laser for sale, second hand. The operating hours amount to approximately 10,000, of which a maximum of 1,000 hours are laser hours in which the laser actually ran. Medium: Ytterbium Wave length: 900-1200 nm Power: 2.65 kVA Specifications: -Type: M2 Cusing -Year of manufacture: 2015 -Very few laser hours! -Machine incl. filter unit-ATEX II-Water V2, sieve length, nitrogen generator with buffer tank -Delivery: immediately Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for the safe processing of of aluminum and titanium alloys etc. Only aluminum (AISi10MG) was printed on the system. The system has also saved a backup folder for titanium parameters. These titanium parameters were originally supplied, so "theoretically" you can also print titanium Outer dimensions: 2542 x 1818 x1987 mm (W ...

We are pleased to offer a high-performance Cold Knife Scoring System manufactured in 2014. This machine is ideal for precise cutting and scoring applications in various industrial sectors, including automotive manufacturing. Technical Details: - Dimensions (L x W x H): 3800 mm x 3200 mm x 2700 mm - Weight: 6000 kg - Table Size: Approximately 1500 mm x 700 mm - Number of Robots: 1 - Number of Workstations: 2 - Table Type: Fixed table Power and Control: - Operating Voltage: 3x400 V AC / N / PE - Control Voltage: 24 V DC - Frequency: 50 Hz - Total Power Consumption: 15 VA - Rated Current: 63 A - Pneumatic Pressure: 6 bar

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

This Press laminating machine is the perfect solution for automotive, aerospace, and various manufacturing applications. Built before 2015, it offers exceptional precision and durability .Designed to handle large and complex laminating projects efficiently, this machine is ideal for businesses seeking to improve quality and productivity. We have three machines from different years ( two dated before 2015 and one from 2018). Machine details : Dimensions (L x W x H): 3600 mm x 2850 mm x 4530 mm Table Size: 1600 mm x 900 mm Weight: - Overall: 4300 kg - Lower part: 4900 kg - Upper part: 4300 kg Find more here - / Contact us at -

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

NEW- Unused Beckman Coulter Automate 1250, a high-performance liquid handling system that is designed to meet your laboratory´s needs for precision, accuracy, and flexibility. The Beckman Coulter Automate 1250 is a fully automated liquid handling system that can handle a wide range of volumes, from nanoliters to milliliters, with unparalleled accuracy and precision. It is equipped with a variety of features that make it easy to use and highly reliable, including a touch screen interface, integrated bar code reader, and automated tip loading and unloading. With the Beckman Coulter Automate 1250, you can streamline your laboratory workflow and increase productivity. It is ideal for a wide range of applications, including sample preparation, assay development, and high-throughput screening. Its flexibility allows you to perform a variety of assays, including ELISAs, PCR, and cell-based  ...

Vacuum evaporator. The evaporator is from 2020 and has run for 40 to 50 hours so far, so it is like new. Medium to be evaporated: rinsing water containing chromic acid (HF-free) Distillate capacity (based on water): 750 L/24h - 30 L/h Power: 12KW Drive power at operating point: 5.5 KW Operating voltage: 400 V Boiler material: Titanium grade 2 / 14404 for distillate area  General information KORRODEST evaporator systems represent an interesting alternative to conventional chemical-physical treatment treatment plants, which are often unable to comply with the limit values required by law. Due to The purely thermally operating system means that no auxiliary chemicals are required for the treatment process, which are often are themselves harmful to the environment. Due to flexible manufacturing processes coupled with a wide range of available materials, almost all typical mat ...

6-axis robot with controller, an associated programming device and, on request, the bagging scale shown for sale. The operating hours are probably less than 100 hours. The system is being sold because of a product change. Previously, the robot filled powder into paper bags (20kg), sewed the bags shut and palletised them. Find more here - / Contact us at -

It is a vacuum conveying system with a conveying capacity of approx. 1 ton per hour. Vacuum conveying and product feeding table is from VOLKMANN. Dust extraction at the product feeding table is from MOTEC Dust extraction system from VALCO Compressed air from KAESER Vacuum pump from BUSCH Metal separator from MESOTRONIC Sieve mill from HOSOKAWA BEPEX The products are fed onto the sieve mill and then fall by gravity into a bigbag (bigbag rack and pallet scale are also part of the system). The plant is currently cleaned and thus partly dismantled. However, it could be put into operation as a demonstration. Find more here - / Contact us at -

Collagen Barrel Lift Manufacturer Servolift Find more here - / Contact us at -

BD FACS Aria Fusion Systems BD FACSAriaTM Fusion Measuring Stand, Type 2 Laser 5-3 with the equipment: Safety workbench 1 BD FACSAriaTM workstation incl. BD FACSDivaTM software 1 Norton GhostTM license for data backup 1 USBII HardDisk 500 GB 1 19" LCD flat panel display 2 Xerox 8570N Colorcube Solid Ink Printer 1 BD FACSAriaTM III Basic System (IC No. 53216) o Maximum optical sensitivity due to: - Gel-coupled cuvette optics. - Maximum light yield due to complete reflection optics with patented octagon detection blocks - Simplest handling due to advanced technology:  completely alignment-free optics on excitation and emission side  Easy Nozzle change with integrated O-rings without influence on optical alignment (each 1 Nozzle 70 μm, 85 μm, 100 μm included)  Exact fully automatic adjustment of the drop delay with live control by BD AccuDropTM  Automatic s ...

Industrial continuous press, including the discharge table. The machine will be in full use until December 20, 2024. From December 21, 2024, the system can and must be dismantled. The glue application machine and the table in front of the press remain and are not for sale. The facility is still fully operational and can be visited at any time. System data: Press brand: Friz Pass Press 1973. Pressplatte: 5300 x 2250 mm Opening: 125mm Heating: hot water / steam Pressing temperatures: Cold approx. 30° to Max temperature 130° (adjustable) Cylinders: 3 rows of 5 cylinders each Diameter of cylinder: 160mm Pressure: 160 Baar (Adjustable) Glue: White glue D4 or modified with hardener. Find more here - / Contact us at -

Manufacturer KRAUSS MAFFEI Type KM 200-700 C1 M. Year 2005 • Dimensions(LxWxH) 5600x1900x2200 • Weight 11000 kg Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors, shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase. Find more here - / Contact us at -

UV drying system, built in 2011 (with extraction) Pack of 8 UV lamps GEW (Mercury lamp with 1300 watts) with E-Brick ballasts 16 KW, air-cooled (with green timer and remote) for printing width 680 mm (OMET VF 670) The steel elements (reflectors and glass panes) were first serviced. Find more here - / Contact us at -

2018 Grieser Vacuum butterfly mixer. Key details about the system: Manufacturer Grieser Year of construction 2018 Operating hours approx. 700-800 hours. 3 associated containers Documentation available Vacuum butterfly mixer Total connected load approx. 18 kW Operating voltage 400 V/ 50Hz Control voltage 24 V DC Machine weight approx. 2400 kg (without container) Max height 2450 mm (stroke 650 mm) Width approx. 1360 mm Long approx. 2641 mm Zones not Ex 3 butterfly stirring inserts Butterfly 72-720 min^-1 Wiper arm n=16 min^-1 Sight glass with light on hood On the hood pressure gauge, analogue and pressure transmitter connection TC-DN25 Vacuum pump 1.5 kW 1500 min^-1 Container clamping with quick release and one-sided monitoring with safety initiator Control panel with control panel in control cabinet Paint finish RAL 1013, pearl white smooth lacquer Container Mixi ...

Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, Scheuch, new -50% Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a manufacturing plant, has always been stored in a dry place, is new and fully functional. Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, new, Venturi nozzle for bag filters Pipe inner diameter 87 mm, Trumpet top outer diameter 125 mm, Flange outer diameter 185 mm, Height 212 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect  ...

Fluid Bed Dryer Type: DCRVF1200x7 Rationale: The material to be dried is placed on the inflow floor and fed there from bottom to top with the Drying air flows through. As a result, the good is heated with constant vibration and the moisture driven out. The vibration prevents the formation of bubbles in the fluidized bed of fine-grained products as well as the Segregation for products with a broad grain spectrum. The vibration also loosens up coarse grains and an almost complete emptying of the entire body. The dwell time of the product can be reduced by adjustment of the vibration. Specifications: Dryer width: 1200 mm Overall length: 7.0 m Length of the dry zone: 4.25 m Length of the cooling zone 2.75 m Tilt: horizontal Execution: · Air flow trough in welded steel construction with the necessary inlet and outlet openings · Exhaust hood with expansion zone, the necess ...