machines and plants for process engineering used for sale (7,696)

Centrifugal fan, centrifugal fanCINCINNATI FANPB-10A457-17620-000.37 kW220 / 380 VNew !Dimensions: 480 x 430 x 650 mm

Manufacturer: Alfa Laval Model : DX 4555 Condition: used Year of Manufacture: 1996 Operating hours : 4,400 The machine is equipped with a high-quality screw coating made of tungsten carbide tiles. The on-site control panel and control cabinet belonging to the machine are still available and could be used further. A frequency converter matching the machine is also included. Shortly before it was taken out of service in 2014, the decanter was equipped with new tiles, so the level of wear should be relatively low Find more here - / Contact us at -

Manufacturer: Passavant Model: Roepress 22.5 Condition: used Year of Manufacture: 2002 Type of Machine: Belt Press Find more here - / Contact us at -

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration" section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - / Contact us at -

2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...

2019 WK Systemtechnik ILS 600 – HTL – Ionline Lubrication System Dickschickt preservation system. The oil is applied via nozzles The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly. By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered. The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution. General data Dimensions (WxHxD) without conveyor units 2486mmx2080mmx2722mm Dimensions with open doors 3265mmx3510mmx2722mm Weight approx. 2500 KG Electrical connection Supply voltage 400 Volt / 50 Hz Power 15kVA Fuse protection 35 A Control v ...

Windsor Klöckner W2700 - 27780 Injection Molding System Wittmann handling system included Injection Volume: - Strock volume: 20300 cm³ Clamping Force: - Schließkraft: 2700 kN Injection Pressure: - Einspritzdruck: 1360 bar Main Connection: - Network 1: - Voltage: 500 Volt - Frequency: 50 Hz - Total Power: 418 kW Cooling Water: - Volume: Not specified - Max Temperature: 32°C Weight: - Total Weight: Not specified Find more here - / Contact us at -

Manufacturer: BvL Series : Ocean RW Model: 1250 2T Year of Manufacture: 2019 General Data - Max Length: 1000 mm - Max Width: 750 mm - Max Height: 750 mm - Diagonal: 1250 mm - Max Load Capacity: 500 daN = 500 kg (even load distribution is required to avoid static issues) - Operating Voltage: 3 x 400 V, N+PE, 50 Hz Find more here - / Contact us at -

ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...

2019 Soft Energy Controls CES0007 Ranking machine End of line testing machine which sorts and grades cylindrical and prismatic battery cells. It is quite a specific piece of equipment, but it has some components that have value and could be repurposed in other machines. Originally from Japan. Main functions: DCIR testing and grading of cells Sorting of prismatic and cylindrical cells based on the cell grade into trays Find more here - / Contact us at -

SFC. Isolator SFC 10 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

2013 SEPARFLEX 250 A Automatic water separator Find more here - / Contact us at -

- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

Find more here - / Contact us at -

Marver MV S-400 semi-automatic cutting table for flat glass Find more here - / Contact us at -

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

"Lower piston press => table/stroke from bottom to top". Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - /

2x 1991 Kettner, Palletizing lines Palletising line 1 & 2 manufacturer Kettner company Year of construction 1991 Overhauled 2009 STATUS Palletising line 1 2 Currently in operation, Mechanically regularly maintained and in operation CONTROL Currently in operation, but no more spare parts available on the market (therefore the entire system will be replaced) The system is ready for use again when the control unit is replaced Line 1 Empty pallet magazine Infeed conveyor Loader / palletiser Finished pallets’ conveyor line Line 2 Empty pallet magazine Infeed conveyor Loader / palletiser Conveyor line ‘finished pallets’ Find more here - / Contact us at -

Bottero cutting table for sale. Year 2001 Model 100BBM The machine is still in operation and is expected to be available in autumn 2024. Find more here - / Contact us at -

Find more here - /

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - /

Painting line Dimensions: painting line with conveyor and PLC. inlet and ionization: 2300mm long x 1500mm wide x 1200mm high paint booth: 2000mm long x 4300mm wide x 3200mm high evaporation zone: 1600mm long x 1600mm wide x 1400mm high Oven: 4200mm long x 1600mm wide x 2300mm high supply air/exhaust air pipes: construction height approx. 1200mm Find more here - /

Demonstration system EVT AQUA - L for sale. Year of construction 2020 Equipped with the following options  Goods movement  Spraying device  Surface drainage  2 x heated flood unit  2 x ultrasonic rod transducers 1.5 kW / 25 kHz each  Return sieve  2 x fine filter 25 μm  Hot air drying  Vapour extraction via filter muck  Automatic oil separation Technical data Cleaning medium: Water with cleaning additive Filling volume: 800 dm3 Heating capacity: 30 kW Connected load: 60 kW Compressed air: 6 bar Weight of the system: 3000 kg Throughput: 4 - 6 batches/h 250 kg/h Basket dimensions: 670 x 480 x 320 mm Plant dimensions: 2400 x 2000 x 2450 mm Operating mode: 1-3 shifts Possible Applications: - Water Treatment: - Industrial Water Purification: Designed for treating and recycling water in manufacturing or processing plants. - Wastewater Ma ...

a continuous cooler / automatic shock cooling of the company Mefus and Frisch Bj. 2015 Find more here - /

Drais Dissolver for sale. Manufacturer: Drais Model: RSV 40-3/VAAS Year: 1981 In the photos are also two containers that are included in the scope of delivery. Find more here - / Contact us at -

2000 HAIDA INTERNATIONAL D-E 702-3000K40 Testing chamber Find more here - / Contact us at -

Type of Machine: Goebel Super F Year of manufacture: 1993 Material: surface sensitive materials, f.e. paper between 30 und 300 gsm, x-ray films-, films and foils Working width: ca. 1800 mm Rewind stations: 2 Core diameter: 50 mm Diameter unwinding: 1400 mm max Weight unwinding: 3000 Kg max Diameter rewinding: 400 mm max. Width rewinding: 1800 mm max, daughterreels to be taken with helping shafts 75 mm min, daughterreels to be taken with helping shafts Speed: 200 m/min max. Voltage supply: 220 / 380 V/50 Hz Total voltage connection: 40 KVA Air connection: 6 bar Length: 4575 mm Widht: 3800 mm Hight: 2000 mm Total weight: ca. 12 to Dokumentation: complete Other: New controlpanel (Touchscreen) & controller in 2010 Find more here - / Contact us at -

Screw diameter 30 mm Foundation plan / installation plan (see machine layout above in the appendix), an extra foundation for the plant was not poured here Operating hours 12455h on 28.01.2021 Automatic cycle counter 743558 processed material PBT-GF 30 Ultradur B4300 G6 Q16 black Find more here - /

Brand: Farmet Model: FE500 Condition: Used Extruder for soya, cereals and waste products for animal feed production. Extruder was used very little. Find more here - / Contact us at -

2012 Wachter Rotar 60 Back-up fuse: max. 65A Designation: Parts cleaning system E-connection 3x40v/50Hz Find more here - / Contact us at -