grinding machines used for sale (2,544)

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

Schleifscheibenaufnehme for Kellenberger / Santiago and Miwatec, as well as another manufacturer of cylindrical grinding machines in stock. Ask us. We carry an extensive stock of accessories:

Kellenberger Univesalrundschleifmaschine 600 U 125. The machine is in a very good condition, used in addition to several CNC-universal cylindrical grinding machines only for making parts. The term is very low according to the age. Special accessories on request both new as well as offered in the used condition. Machine has a paper band filter. Internal grinding spindles, grinding wheel flanges, clamping device, grinding wheels, etc. on request. If necessary one can be mounted digital display two axes. Display accuracy: o, òó1 and 0.002 mm.

Kellenberger: 1000 U 125 Machine was totally dismantled and rebuilt from the ground up. All sheet metal and aluminum parts are laminated. Work piece headstock newly stored. Completely overhauled hydraulic, All filter replaced.

Machine number: 3728-87 Grinding length 2000 mm (Roll grinding machine)

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Grinding body dimension: 200 x 40 x 76 mm Circumference speed: 30 m / sec Follow-up value: 0.7 kW Weight: approx. 250 kg Specification: Double grinding bracket with integrated suction

This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.

This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information.

Stock number: 3986 SURFACE GRINDING MACHINE Manufacturer: SEEST , Type: Surface grinder Specifications: Large stone diameter 350 mm Automatic feed. Length: 1500 mm, Height: 1200 mm, Width: 800 mm , Weight: 1000 kg

Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1.700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 Cv, Total power: 16,5 Cv, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

GER tangential grinding machine mod. RS-10/50 FEATURES Table dimensions: 1000×550 mm Table distance to the center of the grinding wheel: 625 mm Table Speed: 2 to 25 Max Ground Weight: 1000 kgs Longitudinal travel X: 1050 mm Cross travel Y: 500 mm Auto Penetration: Yes Wheel dimensions: Ø 400x80x127 mm Wheel holder: 12.5 HP Hydraulic pump power: 5.5 HP Equipped with Electromagnet: 760×500 mm