grinding machines used for sale (2,181)

grinding wheel diameter: 300 mmno. of working stations: 2 Stücktotal power requirement: 0.75 kWweight of the machine ca.: 0.2 tWith dust exhausterMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mmgrinding width: 500 mmworkpiece height: 630 mmtable-size: 1000x400 mmgrinding wheel diameter: 400 mmweight of the machine ca.: 5.8 tMagnetic plate 1000x500mmwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 650 mmgrinding width: 300 mmmax distance spindle center to table surface: 550 mmcross travel: 310 mmlongitudinal feed: 700 mmweight of the machine ca.: 1.8 tdimensions of the machine ca.: 3.0 x 1.87 x 1.9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mmy-travel: x mmz-travel: x mmgrinding wheel diameter: 175 mmweight of the machine ca.: 0.2 tTurning tool holderDividing head with colletsTable support D-140mmwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 140 mmmax. grinding diameter: 279 mmcentre distance: 750 mmweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1.5 x 1.25 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50 mmband length: x mmband speed: x m/minspeeds: 1800-3600 U/mintotal power requirement: 5.5 kWweight of the machine ca.: 0.6 t1x Belt1x Polishingwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 400 mmno. of working stations: 1 Stücktotal power requirement: 1,7 kWweight of the machine ca.: 0.4 tWith coolant systemMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 175 mmcentre distance: 1000 mmgrinding wheel dia. x width: 400 x 50 / 225 x 20 mmgrinding wheel hole diameter: 127 / 76.2 mmgrinding wheel turining speeds: 1500-2200 U/mincross slide - travel: 245 mmworkpiece spindle head:: turning speed range - stepless: 6-600 U/minspindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 °weight of the machine ca.: 3.1 tdimensions of the machine ca.: 2.85 x 1.75 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mmgrinding width: 600 mmgrinding height: 500 mmweight of the machine ca.: 4.9 tdimensions of the machine ca.: 3.20 x 2.90 x 2.55 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mmno. of working stations: 2 Stückspeeds: 1915/2500 U/mindimensions of the machine ca.: 550x500x1200 mmxmmxmmweight: 220 kgWith coolant systemMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mmdrilling length: x mmlip angle: 40-180 °weight of the machine ca.: 0.4 tDressing devicePoint thinning attachmentMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Grinding chamber with gradation for large individual parts • Dimensions: 3400 x 3750 x 2400 mm • Performance: Long sanding belts 5500 x 100 mm

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

Grinding machine for machine tools, especially small lathes, etc.

With matching spacer rings according to photos. Scope of delivery according to photo 1.

Tool, spare part, accessories

Technical data: Displacement of the grinding head: .60 mm Axis Shift: .50 mm Total power requirement: 25 kW Grinding pressure: 10-1000 N Grinding wheel diameter: 650 mm

Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters

Inv. Num. : 9005 Type: BUC 63 A Producer: TOS Created: 1983 Parameters: Maximum grinding length: 2000 mm Grinding diameter: 630 mm Maximum weight of the workpiece: 2500 kg Maximum length of the workpiece: 3500 mm Machine weight: 5000 kg

Key data: 630 mm

grinding dia - 630 mm grinding lenght - 4000 mm accesories

Inv. Num. : 8994 Type: UWIE Producer: SAACKE Created: 2005 Parameters: Axle number: 5 X-axis travel: 340 mm Travel Y: 240 mm Travel distances Z-axis: 840 mm Maximum spindle speed: 10000 1/min Machine weight: 3900 kg

Key data: 12 kW, 4 t

Inv. Num. : 8947 Type: HELITRONIC POWER-F Producer: WALTER Created: 2011 Parameters: Control System: FANUC Series 31i-MODEL A5 Hours: 34489 h X-axis travel: 460 mm Travel travel Y: 320 mm Travel Z axis: 660 mm C-axis travel: 200 Spindle drive power: 11.5 kW Maximum spindle speed: 10500 1/min Maximum grinding wheel diameter: 200 mm Machine weight: 4200 kg

The machine is in good technical condition, after prior agreement it is possible to test it. I have been using it minimally for the last 15 years. Accessories, complete documentation.

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2002 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

Inv. Num. : 6614 Type: - Producer: JUNG Generated: Parameters: Equipment: DRO In good technical condition.

Inv. Num. : 8928 Type: BHU 40/2000 Producer: TOS Created: 1988 Parameters: Maximum grinding length: 2000 mm Grinding diameter: 400 mm Machine weight: 6150 kg

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

This PALMARY GU32x60S cylindrical grinding machine was manufactured in 2015. It features a swivel over table of Ø320 mm and a distance between centers of 600 mm, allowing for a max external grinding diameter of Ø300 mm. With a grinding wheel speed of 45 M/s and a spindle speed up to 300 r.p.m., this machine is ideal for precision work. If you are looking to get high-quality grinding capabilities, consider the PALMARY GU32x60S machine we have for sale. Contact us for more information.

Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg

Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg