grinding machines used for sale (2,502)

width of the strips: 150 mmband length: 2280 mmband speed: 22 m/sectable-size: 700 x 350 mmroll diameter: 140 / 80 mmmotor speeds:: 2880 1/minrange L-W-H: 1300 x 800 x 1500 mmtotal power requirement: 3,0 kWweight of the machine ca.: 250 kgHorizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized tape oscillation approx. 10mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment:- swiveling grinding unit 90 - 135 degrees- Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mmtable length: 0 mmtable width: mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: mCut-Off Machine for Hard Materials, Coolant, Hand Lever11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. bore diameter to be ground: 6 bis 100 mmstroke - stepless adjustable: 550 mmgrinding depth: ca. 250 mmworkpiece weight: 150 kgtotal power requirement: 15 kWweight of the machine ca.: 4.300 kgdimensions of the machine ca.: 2,7 x2,4 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 750 mmgrinding width: 500 mmworkpiece height: 500 mmtotal power requirement: 50 kWweight of the machine ca.: 5000 tGrinding length, max. 750 mmGrinding width, max. 500 mmCross movement of grinding slide 450 mmWorking height under grinding wheel, max. 500 mmGrinding wheel size Æ 400 x 100 mmGrinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/minTable speed, creep feed 0.02 - 1,000 mm/minVertical infeed, infinitely variable 0.002 - 0.03 mm/strokeGrinding spindle drive, max. 32 kWTotal electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kgAccessories / Special Features Creep feed: Electro-mechanical feed (but also ...

working area: 225 mmtable-size: L:550 mmtable-size: B:200 mmsanding disc diameter: 200mm mmmagnetic plate size: 500 mmweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2000x1600x2100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 250 mmcentre distance: 0 mmhoning length max.: mmmax. module: 5 Gear Ø, min./max. 10 / 250 mmModule range 1 - 5Length of teeth / max. table stroke 500 mmHeight of centres of tailstocks 220 mmMax. weight of workpiece 50 / 100 kgHoning head swivelling +/- 35 °Speeds of honing tool 20 - 500 rpmSize of honing tool, Ø x width 300 x 40 mmWorkpiece speeds 500 - 3,000 rpmTotal adjustment of cross slide 270 mmRapid traverse of cross slide 50 mmInfeed travel of cross slide, mechanical 1 - 8 mm/ØRoughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/secTable speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 HzWeight 3,200 kgAccessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch, as well as b ...

max. wheel diameter: 0 mmgear width: 120 mmmax. module: 3 min. module: 1 total power requirement: 20 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: m: : : : : : 5 machines in stock,YOM: between 1986 and 1990Gear Æ, min./max. 55 / 120 mmGear Æ for shaft-formed parts 80 mmModule (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 °Helix angle, max. 40 °Workpiece clamping length 145 - 420 mmGrinding worm Æ 300 - 400 mmGrinding worm width 25 - 40 mmGrinding worm speeds, infinitely variable (35 m/s) 1,650 rpmFeed range  ...

control: FANUC Power Mate hydraulic: . grinding length: 800 mmgrinding width: 400 mmdistance spindle center to table: 650 mmtable speed -stepless-: 30 m/mingrinding wheel size: 350 x 50 x 127 mmweight of the machine ca.: 3.5 tdimensions of the machine ca.: 3.3 x 2.3 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 525 mmtable surface area: 960 x 400 mmdimensions of grinding wheel: 350 mmtable height over floor: mm: 600 x 400 mmgrinding spindle speed: 3000 U/mintable load capacity: 1100 kptotal power requirement: 8,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,4 x 1,9 x 2,1 mSurface grinding machine- Magnetic chuck- Coolant system with filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mmWeight: 300 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFotos von bereits gelieferten Maschinen.Mechanische Überholung:-komplette Maschine nach Kellenberger Messprotokoll überholt-Neue servicefreundliche Kabine-NeulackierungElektrische Überholung:-FANUC Steuerung mit BLUE-SOLUTION-Neu aufgebauter Schaltschrank-Neue Antriebstechnik-Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc.-Neue Absolut-Glasmaßstäbe in x- und z-Neuer Absolut Drehgeber (Bei-B-Achse)Fotos von bereits gelieferter Maschine mit anderen Optionen.Schleikopfvariante UR/RS:-Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander!-Dadurch jeweils 400mm Scheibendurchmesser!-Dadurch wesentlich geringere Kollisionsgefahr-Einfacheres programmieren-Schleifscheibenausrüstu ...

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 350 mmtable-size: 820 x 350 mmdist. center of grinding spindle - table: 140-525 mmtable movement: 660 mmworkpiece weight max.: 400 kgdiameter / bore of grinding wheel: 350 x 50 x 76,2 mmtable speeds: 2-28 m/minpower capacity - grinding motor: 3,7 kWtotal power requirement: 8 kWweight of the machine ca.: 2100 kgdimensions of the machine ca.: 4,5 x 3 x 2,4 mGeipel & Hotz FS 60 AC surface grinder, built in 2001, in good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 350 mmworkpiece height: mmtable surface area: 1720 x 400 mmdimensions of grinding wheel: 400 x 50 x 127 mmtable height over floor: mm: 600 x 300 mmgrinding spindle speed: 3000 U/mintable load capacity: kptotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3,0 x 2,0 x 2,2 mSurface grinding machine- Magnetic grinding wheel- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mmgrinding width: 230 mmtable-size: 510 x 200 mmgrinding wheel diameter: 225 mmweight of the machine ca.: 1.5 tMagnetic plate 1000x500mmwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal grinding spindles: . centre height: 240 mmgrinding length: 2500 mmgrinding wheel diameter: 750 mmDimensions (L/W/H): 6000 x 3000 x 2500 mmweight of the machine ca.: 9 tInternal grinding attachment with grinding spindleMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mmhoning diameter: 1.5 - 165 mmspindle turning speed range: 200-2500 U/minweight of the machine ca.: 0.6 tdimensions of the machine ca.: 1.3 x 1.35 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mmhoning diameter: 1.5 - 165 mmspindle turning speed range: 200-2500 U/minweight of the machine ca.: 0.48 tdimensions of the machine ca.: 1.3 x 1.35 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 700 mmgrinding width: 550 mmworkpiece height: 500 mmtable-size: 1320 x 500 mmgrinding wheel diameter: 400 mmweight of the machine ca.: 3.9 tMagnetic plate 1000x500mmwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): - mmthroat: - mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: 400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mmband length: 2000 mmband speed: m/mintotal power requirement: kWweight of the machine ca.: 90 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: - mmgrinding length: - mmcentre height: - mmmechanical: ja centre distance: 2000 mmweight of the machine ca.: 7,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: - mmgrinding length: - mmcentre height: - mmmechanical: ja centre distance: 2000 mmweight of the machine ca.: 7,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: . : . diameter: . mmserial number: MP-70-3-4-98-A1 Job No.:: 4813 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: . Diameter: . mmDiameter: Bechälter 1700 mmserial number: MP-70-3-4-99-A1 : 5221 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mmcentre height: 150 mmControl: FANUC grinding wheel size: max. 400 x 63 x 127 mmworkpiece weight: 120 kgengine output: 7,5 kWturning speed range - grinding wheel: 45 m/s m/sswivelling range: +45/-15° Gradwork piece spindle speed: 22-313 / 51-750 U/minworkpiece spindle swivable +/-: 90 °tailstock quill taper MT: MK 4 x-travel: 355 mmz-travel: 4,0 mmWorking speed: 0 + 7,5 m/minweight of the machine ca.: 4,0 tdimensions of the machine ca.: BTH 3,7 x 2,2 x 1,9 m-incl. Coolant system-incl. Lynette-incl. Sharpening diamond-incl. open Lynette-incl. 3 pieces of grinding discs-incl. 3 pieces of flanges-incl. Internal grinding spindle attachmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.