grinding machines used for sale (2,210)

width of the strips: 75 mmband length: 2000 mmband speed: 36 m/mintotal power requirement: 4 kWweight of the machine ca.: 82 kgdimensions of the machine ca.: 1000 x 500 x 1150 mmBelt sander Metallkraft MBSM 75-240-1, article no.: 3923272For sanding surfaces, edges and rounding offDescription:- Powerful motors and vibration-free operation for the best sanding results- Quick sanding belt change in seconds thanks to quick-release system- Large surface sanding area thanks to fold-away upper sanding belt cover- Continuous sanding surface after removal of attachments enables sanding of long workpieces too- Can be used with and without extraction- One extraction nozzle on the spark box and one on the rear belt roller- Simple adjustment of the belt run via adjusting screw- Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system- Infinitely tiltable sanding unit- ...

grinding length: 600 mmgrinding width: 350 mmworkpiece height: mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1500 mmcentre height: 180 mmweight of the machine ca.: 3,9 tdimensions of the machine ca.: L: 4900 x 1650x 1800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 1000 mmworkpiece weight: - kgworkpiece height: - mmControl: grinding wheel motor: 11 kWtotal power requirement: 25 kWweight of the machine ca.: 6500 kgdimensions of the machine ca.: 4100 x 3200 x 2600 mmMachine comes from a plant closureEquipment:Coolant system 500 liters with paper belt filter4 grinding stone (3 of them unused)Technical data:Rotary table diameter 800 mmMax. distance from rotary table to grinding spindle center 850 mmGrinding wheel diameter 400 mmGrinding wheel width 80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 762 mmgrinding length: 5500 mmcentre height: mmworkpiece weight: 10000 kggrinding wheel size: 762 x 76 x 304,8 mmgrinding wheel turining speeds: 1 -750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 14,8 kWworkpiece drive: 5,5 - 7,35 kWgrinding head infeeding speed: 0,00635 - 0,0508 mm/mintable speeds: 101 - 2021 mm/mintotal power requirement: ca 25 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,35 mMachine complete with:- 9 x steadies.- Coolant/Filtration Tank.Machine has had over 80.000€ of engineering maintenance work/overhauling in 2023 including replacement of air bearing liners. 7 x steadies fully overhauled. Overhaul of top table & centre heights of workhead & tailstock.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPhoto of machine already delivered in similar scope:-major maintenance-New table geometry-partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard)grinding wheel equipment RIGHT 300x40x127mmInternal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-PolyB-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/sHigh-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstockNO micro-adjustment on the tailstockSpring-loaded quill insertTop table cooling Standard workpiece headstock MK 5 DIN 55026 size 5Micro-adjustment for the standard workhead Dressing device on the lower table A ...

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled.Mechanical overhaul:• Overhaul of the entire machine according to Kellenberger measuring protocol• A new service-friendly cabin• RepaintingElectrical overhaul:• New, modern CNC cylindrical grinding machine control system• New built up control cabinet• New drive technology• Exchange of all electric lines, Berus pressure switch, etc.• New absolute glas scales in X- and Z- axis• New absolute rotary encoder (for B-axis)Please rem ...

grinding length: 500 mmgrinding width: 250 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 360 mmgrinding length: 3000 mmcentre height: 180 mmtotal power requirement: 17 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 2905 U/minweight: 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1.000 mmgrinding width: 550 mmworkpiece height: 400 mmtable surface area: 1.580 x 550 mmtable load capacity: 950 kgmagnetic clamping plate: 1.000 x 550 mmx-Travel: 1.200 mmtable feed: 1 - 30 m/miny-axis: mmvertical feeds:: 1 - 300 mm/minz-axis: 470 mmcross feed: 1 - 2.000 mm/mindimensions of grinding wheel: 400 x 100 x 127 mmgrinding wheel speeds: 1.500 - 3.500 U/mingrinding spindle drive: 11,00 kWControl: total power requirement: 23,00 kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: 4,50 x 2,90 x H2,90 mCoolant system with coolant pump integrated in the hydraulic tank,exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 32 mmdrill diameter: 32 mmdrilling length: 0 mmdrilling length: 0 mmlip angle: °lip angle: °total power requirement: kWtotal power requirement: kWweight of the machine ca.: tweight of the machine ca.: tdimensions of the machine ca.: mdimensions of the machine ca.: mUniversal Drill Bit Grinderlots of accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 125 mmcentre distance: 400 mmControl: FANUC 21i Capstan diameter: max. 406 mmwheel dimensions: 406 x 127 x 40 mmworkpiece weight: 30 kglongitudinal slide -travel: 483 mmcross slide - travel: 254 mmtotal power requirement: max. 20 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 3,0 x 2,0 x 2,1 mincluding 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlledincl. C-axisincl. Quick-Set Probeincluding Sensitronincluding Magnetic Jawincluding hydraulically foldable dresserincluding other small accessoriesincluding documentationwithout a coolant system, as it was previously connected to a central unitPower On hours approx. 71,000 hSpindle hours approx. 25,900 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mmWeight: 2500 kgTotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mmWeight: 2000 kgTotal power requirement: 6,4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 29 kgTotal power requirement: 0,25 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x1160x550 mmWeight: 85 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x850x1300 mmWeight: 420 kgTotal power requirement: 4,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x680x1580 mmWeight: 400 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x1000x1350 mmWeight: 420 kgTotal power requirement: 2,7 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x1000x1600 mmWeight: 350 kgTotal power requirement: 0,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1000x900x1400 mmWeight: 680 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1130x500x1250 mmWeight: 300 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 650x1160x650 mmWeight: 125 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 820x1150x1580 mmWeight: 450 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x780x1500 mmWeight: 500 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1600x1400 mmWeight: 750 kgTotal power requirement: 5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 940x640x136 mmWeight: 96 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.