Edge gluing machines used for sale (93)

gebr. Edge banding machine G330 FIELDS Year 2013 only 88 operating hours read! Connected load: 5.5 kW Rated current: 14 A Edge thickness: 0.4 - 3 mm Strip material (WxH): 3 x 49 mm Feed speed: 8 m/min. Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece thickness: 8 - 45 mm Heated Introducer Ruler Glue basin Impact shears for pre-cutting roll materials up to 3 mm Pressure unit preloaded with springs 1 straight pressure roller and 1 holding pressure roller Cross-cut saw unit Flush and radius milling unit Control panel with LCD display Wing Scraper Pull-out workpiece support Extraction connection: 120 mm Machine dimensions (LxWxH): 190 x 82.5 x 128.5 cm Weight: approx. 350 kg only. 88 operating hours read Total linear metres: 4,437.6 m The machine comes from a 1-man operation. Manufacturer information

0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3 mm, 60 mm, 4500 mm

SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2021 - Immediately available - Top condition

Drive feed speed: 10 m/min fixed via heavy-duty conveyor belt. Panel thickness: 6 to 60 mm (depending on the end cutting unit used: max 45 mm with the 1822 group / up to 50-60 mm with the 1918). Edge thickness (in rolls): 0.4 to 3 mm. Edge thickness (in strips/wood strips): Up to 6 mm as standard (option up to 8 mm possible). Minimum panel width: 65 mm. Minimum panel length: 160 mm. Minimum length of edgebanding (edgebands): 350 mm Auction-ID: A1-50215-101

Key data: 3 mm, 60 mm, 4000 mm

SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2016 - Immediately available - Incl. replacement glue basin - Top condition

Brand KDF210 Optimat Manufacturer: Brandt Type: KDF 210 Year: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ with touchless positioning, Start-Stop optic-induct Sensors and LCD Display Control panel: LCD, with 4 lines tekst, ergonomical positioned at infeed -side machine YouTube:

FORMAT 4 tempora F600 Single-sided edge banding machine - Year of construction 2020 - Immediately available

: 0,4-6 mmWorkingpiece thickness from to: 6-60 mmTotal length: 3516 mmFeed speed: 10 m/min.total power requirement: kwWeight: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BIESSE Stream A / 6.0 Single-sided edge banding machine for attaching various edge materials (Melamine, PVC, ABS, Veneer, Wood) - Year of construction 2018 - Including air cushion table - Immediately available - Including dismantling and loading - Including additional replacement glue basins

: 0,4-8 mmWorkingpiece thickness from to: 8-60 mmTotal length: 4930 mmFeed speed: 10 m/min.total power requirement: kwWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: Electronic control POWER CONTROL PC 20+ PU top pressure rollers instead of rubber rollers Optimization of workpiece spacing Inlet ruler extension by 300mm with additional laminate overhang device JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 with automatic edge retraction – Quickmelt APPLICATION UNIT – Standard application unit replaceable PU glue – Pressure zone with motorized adjustment QA 45 EVA application unit for all types of adhesives and quick changeovers CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT CAPS PRE-MILLING UNIT 2 X 0.55 KW counter-rotation – with PNEU ...

: 0.4-5 mmWorkingpiece thickness from to: 10-50 mmTotal length: 2730 mmFeed speed: m/min.total power requirement: kwWeight: 720 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passage. OVERVIEW OF THE UNIT CONFIGURATION: JOINING MILLING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A8 with workpiece preheating, fill level control, Quickmelt application unit, magazine and motorized pressure zone CROSS-CUT UNIT CHAMFER/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 COUNTER ROTATION PNEUMATIC 2-POINT ADJUSTMENT SHAPE MILLING UNIT 1 X 0.35 KW WD 60; also for construction floors PNEUM. 2-POINT ADJUSTMENT RADIUS/CHAMFER MZ 40 MULTI-STAGE SCRAPER UNIT GLUE JOINT SCRAPER BLADE BUFFING UNIT Top pressure: PU rollers instead of standard rollers Release agent spray unit workpiece, leading and trailing edges; edge material Power Control PC 20+ Ele ...

: 0,4-5 mmWorkingpiece thickness from to: 6-45 mmTotal length: 4130 mmFeed speed: 11 m/min.total power requirement: kwWeight: 1250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 mm, 10 mm, 3160 mm

EBM edge banding machine KDP 111 SLK - built in 1991 -11.5 kW motor, banding from 0.8-5 mm, verst. Cross-cut knife (roll separation up to 3 mm) Rapid heating basin, HF cross-cut sawing unit, HF flush milling unit, HF chamfer or Radius milling unit, pull-out workpiece support, heated inlet ruler complete with 2-part sound insulation hood and central extraction - Good condition - Length approx. 3,160 mm Depth with roller plate approx. 1,230 mm Workpiece width, min. 90 mm Workpiece thickness, min. 10 mm Workpiece thickness, max. 50 mm Workpiece length, min. 260 mm -Operating instructions available

: 0,4-3 mmWorkingpiece thickness from to: 6-45 mmTotal length: 3700 mmFeed speed: 8 m/min.total power requirement: kwWeight: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aggregate equipment: - Joining milling unit 2 x 2.2 Kw 200 Hz - Gluing unit - Cross-cut unit chamfer/straight 2 x 0.35 Kw - Milling unit 2 x 0.55 Kw counter rotation - Grooving unit 1 x 3.5 Kw - Shape milling unit 2 x 0.35 Kw Wd 60 - Profile scraper blade with quick-change heads (R 1 and 2 mm) - Glue joint scraper blade - Buffing unit Other features: - Extended inlet ruler with program adjustment - Program adjustment pressure zone - Motorized adjustment upper pressure - PU top pressure rollers - Automatic edge retraction - Quickmelt application unit - Pneumatic 2-point adjustment caps - Pneumatic adjustment of the scraper blade - Program adjustment side buttons - Pneumatic 2-point adjustment, vertical sensing rollers - Release agent spray unit workpiece - Lubricant spray unit edge material - Cleaning agent spray unit - Axis adjustment for groove milling machi ...

: 0,4-3 /8 mmWorkingpiece thickness from to: 10 - 60 mmFeed speed: 8 / 12 m/min.: Ja Flush/radius/chamfer milling units: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Brandt Highflex KDF 220 with jointing, corner copying and two Scraper blades. Very well automated. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Pull-out workpiece support Suction connection 1x120mm, 1x100mm, 3x80mm Easy-touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in high-flex design, highly automated, change of edge from thin edge to thick edge via programs Aggregates: Extended inlet zone Chain conveyor central lubrication, pneumatic manual Quick-change glue basin device, currently one glue basin available Top pressure manual adjustment, PU rollers Infeed ruler manual adjustment with SIKO counter on chip removal Joint milling with slide ...

: 0,4-3 / 10 mmWorkingpiece thickness from to: 10 - 60 mmTotal length: ca. 5.100 mm mmFeed speed: 18 m/min.total power requirement: 13 kwWeight: ca. 2.000 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IMA COMBIMA K/II/R75/760/V/R3 edge banding machine was built in 2000 in Germany by IMA-Maschinenfabriken Klessmann GmbH. The machine is used in woodworking workshops and furniture manufacturing companies, where it is used for the precise edge-banding of components made from chipboard, MDF and laminated materials. The durable bond between the board edge and the edging contributes to the aesthetic appearance of the finished components, whilst also increasing their resistance to mechanical damage and moisture. The edge banding process begins with heating the adhesive to the correct temperature, and then applying it evenly to the edge of the board. At the same time, the edging is precisely pressed against the surface with rollers. Maintaining the correct temperature and constant pressure ensures the adhesive bonds evenly along the entire length of the component, guaranteeing a high-qualit ...

: 0,4-3 mmWorkingpiece thickness from to: 8-45 mmFeed speed: 9 m/min.total power requirement: 14,5 kwworkpiece length - min.: 140 mmPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : ca. 75.400 : ca. 59.300 mlength in total: ca. 4.700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: - Joining milling unit - Gluing part with pressure zone - Cross-cut unit - Radius/chamfer/flush milling machine - Shape milling unit (2-motor) - Profile scraper blade - Wing scraper blade - Buffing unit - Release agent spray unit - Detergent spray unit Technical data: Workpiece: Workpiece thickness min. 8 mm (or 12 mm with profile scraper), max. 60 mm Workpiece length min. 150 mm Workpiece width min. 150/65 mm with workpiece thickness 25 mm Smallest workpiece 65 x 300 mm / 150 x 300 x 19 mm Edge material: Edge thickness 0.3 - 3 mm Edge height 12 - 65 mm Edge length min. 200 mm Max. edge cross-section: Roll 150 - 180 mm, strip 480 mm Machine data: Length 6,630 mm Width 2,050 mm (hoods open) Height 1,700 mm (hoods closed) Min. distance to the wall: 1,000 mm (aggregate side) Weight: approx. 3000 kg Upper edge of chain conveyor 900-930 mm Workpiec ...

HolzHer 11334 Arcus Edegbander Manufacturer: Holz Her Type: 1434 Arcus Year: 2010 Machine number: 770_0_912 15500554 Controll system: Computer control -NC servo-axis control Control panel: PPC 231 15″touchscreen, USB, Ethernet Edge material thickness: Roll: 0,4 – 3 mm, Striplengths: 0,4 – 8 mm Edge material witdh: 65 mm Workpiece thickness: 6-60 mm Workpiece width: Min. 60 mm Workpiece length: Min. 180 mm Cutting edge material: Max. 3 mm Feed speed: Variable 10-12 m/min Round-end: 10 m/min) Machine configuration: Product guidance fence: automatic positioning 1802: Pre-milling Tooldiam.100mm, height 43mm, 2 2.0 KW 1903: Automatic edgeband infeed with band-clipping and fixed lengths magazin ø820 mm 1906 MG: Holzher Gluejet (cartridge 330 gr & Pallets 1,4 KG), 1.9 KW voor PVA en PUR-lijm 1913: Pressure zone with 1 driven and 2 free running rol 1918: Cut saw, straight and angle adjus ...

Key data: 8 mm, 8 mm

For sale is a Brandt edge banding machine bj. 2010 The machine was serviced by the Brandt company only 3 months ago. No defective available. For sale due to new acquisition. Special equipment in the pictures. Loading facilities available Price is net VAT

: 0,4-3 / 8 mmWorkingpiece thickness from to: 8 - 50 mmTotal length: 5.360 mmFeed speed: 11 m/min.total power requirement: 7 kwWeight: ca. 2.500 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition The machine has been used little and is in a well-maintained, fully functional condition. It is immediately ready for use. Sightseeing and pick-up A viewing and a test run are possible by appointment. Truck access available. Loading by forklift on pallet possible. A forwarding company is located in the immediate vicinity and can be easily commissioned with the collection if necessary. Technical data Suitable for edge thicknesses from 0.4 to 3 mm Edge height: 15 to 55 mm Workpiece height: 10 to 50 mm Minimum workpiece width: 80 mm Minimum workpiece length: 100 mm Feed motor: 1.1 kW Feed speed: 12 m/min Control panel at the machine inlet at eye level Chain feed Support plate for PVC and ABS edging Pressure zone with pneumatically driven main pressure roller and holding pressure rollers Centrally adjustable top pressure Teflon-coated glue ...

Dimensions (L/W/H): 1720x760x1160 mmWeight: 230 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used HOMAG EDGETEQ S-240 HIGHFLEX 1230 edge banding machine, built in 2019 with BARBARIC RETURN RTS 04 L COMPACT return system, year of manufacture 2022 Technical data edge banding machine: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm - At workpiece thickness 41-60mm ¦ 150 mm - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 60 mm - Edge height max. = workpiece height ¦ + 5 mm - Edge material roll ¦ 0.4 - 3 mm - Edge cross-section max. - For PVC ¦ 135 mm² - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - Strip edge material ¦ 0.4-6.0 mm - Edge cross-section max. - For strips ¦ 165 mm² - Feed speed ¦ constant 11m/min - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Overall length ¦ 4740 mm Equipment edge banding machine: - Adjustable inlet ru ...

Dimensions (L/W/H): 1050x830x1100 mmWeight: 133 kgTotal power requirement: 2,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Composition: Bonding unit Edging unit Cross-cut unit

Dimensions (L/W/H): 1480x760x1160 mmWeight: 180 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: - Extended inlet ruler - Joining milling unit 2 x 2.2 KW 200 Hz - Gluing unit A8 - Cross-cut unit chamfer/straight 2 x 0.18 KW - Pneumatic adjustment caps chamfer/straight - Milling unit 2 x 0.55 KW counter-rotation with multiple roller probing - Pneumatic 2-point adjustment - Program adjustment side buttons - Shape milling unit 1 x 0.35 KW WD 40 - Pneum. 2-point adjustment radius/chamfer - Profile scraper with quick-change heads and special keypad - Pneumatic adjustment of the scraper blade - Glue joint scraper blade - Buffing unit Technical data: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm - At workpiece thickness 41-60mm ¦ 150 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 8 - 60 mm - Edge height max.= workpiece height¦ + 6 mm - Edge m ...

Dimensions (L/W/H): 3810x575x1520 mmWeight: 1000 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Brandt Ambition 1120 c with 2 glue basins, joints, corner copying and two Scraper blades. Good entry-level machine with extensive equipment. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 10 - 40mm Feed speed approx. 8m/min Noise protection hood Pull-out workpiece support Extraction connection 1x100mm, 4x80mm including the pictured piping to 200mm Easy-touch control with color screen for easy operation of the machine 10 programs can be saved Aggregates: Top pressure manual adjustment with crank and SIKO counter Infeed ruler manual adjustment with SIKO counter Joint milling with slide milling, sharpened A total of 2 interchangeable glue basins for a quick colour change from white to transparent Gluing part with automatic edge retraction for rolls up to 3mm Pressur ...

Dimensions (L/W/H): 860x1060x1060 mmWeight: 280 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 mm, 40 mm

An edge banding machine is being sold. Machine works perfectly. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Banding thickness max 5 mm Plate thickness max 40 mm Thickness of roll material max 3 mm Workpiece length min 180 mm Workpiece width min. 60 mm Feed max. 8 m/min Glue system granules glue basin bottom Cross-cut saw unit 2 motors Weight approx. 660 kg The machine must be picked up with a tail lift or drop-down trailer, as there is only one pallet truck. Price is 3000 net plus VAT All information without guarantee Article location Nuremberg

Dimensions (L/W/H): 1720x950x1260 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her Sprint 1329 Black Edition Heavy version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, power PC color screen Motorized, positioning-controlled bridge height adjustment Pre-milling unit for attaching in front of the gluing station autom. Inlet ruler 1350 mm MOT Fully automatic edge magazine for roll and strip goods MOT GLU-JET Cartridge Glue Application Station - Granu + PU Gluing, Thin Film Technology Edge height max. 60 mm Glue height adjustment / tactile nozzle Printed work 1913 mot. Motor-pneumatic NC servo axis Cross-cut unit for roll and strip goods up to 15 mm edge thickness with electro-pneumatic conversion of 0-10° bevel of the cross-cut saws Multifunction milling unit MOT 6 - NC control axes: Flush milling 8 mm (15 mm) Radius milling Bevel milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners wit ...

Dimensions (L/W/H): 1470x810x1120 mmWeight: 250 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Dimensions (L/W/H): 1700x950x1260 mmWeight: 400 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is FUNCTIONAL TESTED in VERY GOOD CONDITION from stock Lieboch

Dimensions (L/W/H): 4200x1500x1500 mmWeight: 1050 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

Dimensions (L/W/H): 1320x700x1120 mmWeight: 125 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

Dimensions (L/W/H): 1680x930x1200 mmWeight: 350 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic edgebander machine OCMAC SHF 800 second hand machine machine ideal for solid wood edges up to 30 mm thick with 4 sanding units machine composition: 1.gluing group with glue tank 2.pressure rollers 3.edge feeder 4. Dual-motor end trimming units 5. Dual-motor trimming units 6. Dual-motor edge trimming units 7. Spindle moulder n.4 sanding units cabin machine machine length approx. 900 cm

Dimensions (L/W/H): 1820x585x1450 mmWeight: 500 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.