Edge gluing machines WINTER KANTOMAX BASIC

Workingpiece thickness from to: 10 mm Condition

The machine has been used little and is in a well-maintained, fully functional condition. It is immediately ready for use.

Sightseeing and pick-up

A viewing and a test run are possible by appointment.

Truck access available. Loading by forklift on pallet possible. A forwarding company is located in the immediate vicinity and can be easily commissioned with the collection if necessary.

Technical data

Suitable for edge thicknesses from 0.4 to 3 mm
Edge height: 15 to 55 mm
Workpiece height: 10 to 50 mm
Minimum workpiece width: 80 mm
Minimum workpiece length: 100 mm
Feed motor: 1.1 kW
Feed speed: 12 m/min
Control panel at the machine inlet at eye level
Chain feed
Support plate for PVC and ABS edging
Pressure zone with pneumatically driven main pressure roller and holding pressure rollers
Centrally adjustable top pressure
Teflon-coated glue basin for hot-melt adhesive granules
Glue application by means of glue roller
Electronic temperature control, working temperature 180 to 200 °C
Pneumatic roller capping
Pneumatic cylinder for workpiece spacing
Cross-cut saw unit for leading and trailing edges
High-precision linear guide
2 cross-cut saw motors with 0.5 kW each, 200 Hz, 12,000 rpm
Pulling cross-cut cut for high cutting accuracy
Flush and radius milling unit at the top and bottom with vertical and horizontal sensing
2 milling motors with 0.5 kW, 200 Hz, 12,000 rpm each
Radius scraper unit with sensing top, bottom and side
Buffing unit at the top and bottom
2 buffing motors with 0.18 kW, 50 Hz, 1,400 rpm each
Height adjustable
Total power: 5.0 kW / 400 V
Extraction connection Ø 100 mm
Pull-out workpiece support
Noise protection cladding with viewing window
Compressed air connection: 6 bar
Dimensions (L × W × H): 2,650 × 640 × 1,400 mm
Weight: approx. 700 kg

Note

The machine is sold second-hand. All information is provided to the best of our knowledge, errors and prior sale reserved.

seller offer No. resale 169928333