accessories for machine tools used for sale (2,566)

Linear rail with folding cam Height-adjustable for mounting on hole punches

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg

diameter: 250 mmtool adaptor: 250 length: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 900 mmdepth: 450 mmheight: 1800 mmweight: 0,152 tHigh quality professional tool cabinet.This cabinet consists of two separate boxes that are mounted on top of each othercan be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep.Both shelves are adjustable in height and can hold 150 kg eachShelves are loaded.The drawer cabinet is equipped with 6 drawers of 100 mm height. OneDrawer is 200mm high. Max. load per drawer is 100kg.All drawers are centrally locked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various fixed steady rests for lathes up to center height approx. 600 mm

various machine tables, angle tables, universal tables, clamping cubes, cube tables

Various milling heads for milling machines and gear cutting machines, hobbing machines

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

surface area: 800455 mmno. of flutes: - groove width: - mmweight of the machine ca.: tdimensions of the machine ca.: mUniversal swivelling + tilting tableTable top rotatable 360 Tiltable forwards/backwards -15 / 45°Sideways swivelling +/- 30Cross adjustment ( Y ) 160 mmMounting surface 350 x 250 mm ( additional adapter plate )Table surface 800 x 455The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 700 250 mmno. of flutes: 5 groove width: 12 mmtotal power requirement: 0 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 700250320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 800 x 425 mmno. of flutes: 6 groove width: 14 mmtable length: 800 mmtable width: 425 mmtable load: 0,3 ttotal power requirement: kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 0,80,60,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley filledContents and equipment see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St.range L-W-H: 720 x 580 x 800 mmweight: 100 kg: 100Kg je Lade Stable tool cabinet with 6 drawers, lockable.2 x 75, 4 x 100, 1 x 150 and 1 x 200mmInternal dimensions: 620x450 mm.Maximum load per drawer 100kg!Furnishings:32x boxes 75 x75 mm.16x boxes 75 x 150 mm.8x boxes 150 x 150 mm.12x dividers long32x short dividers1x stacking trayFigure with 8 drawers.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 710 x 510 x 900 mmweight: 52 kg: 5 St.Professional drawer cabinet for workshop equipment.Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm.Inner dimensions of the lower drawer 56 x 43 x 17 cm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mmtable load: 0,4 ttable height: 160 mmtotal power requirement: 0 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 0,70,80,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

throat: - mmtool adaptor: MK power requirement: 0 kWmax. pitch circle: ca. 250 mmtotal power requirement: 0 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: Ø 500 x 500 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packing: 570270870 mmShipping weight: ca. 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ? mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: 400330300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: ? mmno. of flutes: ? groove width: ? mmtotal power requirement: 0 kWweight of the machine ca.: 220 kgdimensions of the machine ca.: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 1000 x 520 mmno. of flutes: 6 groove width: 16 mmweight of the machine ca.: 400 kgdimensions of the machine ca.: 1,20,80,8 mTurning, swivelling and tilting table ( universal table )suitable for FP- 2 L / 3 L / 3 LV / 41 / 426 T-slots 16 mm at 90 mm centres.Table top can be swivelled +- 45° ( or 180° ).Table top can be tilted 4 x 15°.Table load moving/stiff: 1000/1500 kg,Weight approx. 400 kgBearing frame and lifting beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8000 mm, 3000 mm

Large plate field with T-slots Clamping area 8,000 x 3,000 mm Thickness 350 mm. With 12 x T-slots. Total weight approx. 20 t

table diameter: - mmtable load: - ttable height: - mmControl: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mCNC Swivel Rotary Table/ CNC Dividing Apparatusincl. TailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). T ...