accessories for machine tools used for sale (2,137)

surface area: 800 x 425 mmno. of flutes: 6 groove width: 14 mmtable length: 800 mmtable width: 425 mmtable load: 0,3 ttotal power requirement: kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 0,80,60,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min: ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces )suitable e.g. for OKUMAbox dimensions approx. 500 x 300 x 200 mmweight approx. 50 kg3 x EPPINGER 4.200.231 drilling and milling head3 x EPPINGER 4.200.289 drilling/milling head1 x Drill- Milling head WTO 4 1 06 1 6006 - 401 x COROMANT 410 1200 72 - 40 drilling and milling head1 x 2-jaw chuck KH 1-40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate depth: 6000 mmplate width: 1250 mmplate height: 200 mmweight of the machine ca.: 4520 kgrequired space: 6000 x 1250 x 200 mmGERD WOLFF clamping plate 6000 x 1250 x 200mmIf you have not found your desired size, you can also send usan e-mail with the completed PDF form. With this, we canhave a plate made for you individually.T-slots - width: 42 x 22 mmT-slot spacing: 200 mmNumber of slots: 6Edge distance: 125 mmCasting quality HT250Flatness less than 0.12 mm.Surface machined according to DIN 876/IIICasting quality HT250Clamping plates - T-slot plates - plate field - milling table - machine tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley filledContents and equipment see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St.range L-W-H: 720 x 580 x 800 mmweight: 100 kg: 100Kg je Lade Stable tool cabinet with 6 drawers, lockable.2 x 75, 4 x 100, 1 x 150 and 1 x 200mmInternal dimensions: 620x450 mm.Maximum load per drawer 100kg!Furnishings:32x boxes 75 x75 mm.16x boxes 75 x 150 mm.8x boxes 150 x 150 mm.12x dividers long32x short dividers1x stacking trayFigure with 8 drawers.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 710 x 510 x 900 mmweight: 52 kg: 5 St.Professional drawer cabinet for workshop equipment.Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm.Inner dimensions of the lower drawer 56 x 43 x 17 cm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.tool trolleywith tool set 272 pieces.See picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: - mmShipping weight: 22 kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mmtable load: 0,4 ttable height: 160 mmtotal power requirement: 0 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 0,70,80,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 440 x 1000 mmno. of flutes: 5 groove width: 16 mmtotal power requirement: - kWweight of the machine ca.: 210 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: - kWtool adaptor: KOMET PKB 200-20-112 total power requirement: - kWweight of the machine ca.: 700 kgdimensions of the machine ca.: 1,6 0,7 1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

throat: - mmtool adaptor: MK power requirement: 0 kWmax. pitch circle: ca. 250 mmtotal power requirement: 0 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: Ø 500 x 500 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: - mmtool adaptor: - power requirement: - kWweight of the machine ca.: 70 kgdimensions of the machine ca.: ? mArticulated spindle drill head with 8 spindlesMaximum pitch circle diameter 200 mm,Minimum spindle distance 41 mm,Height connecting flange/spindle end : 570 mm,Gear ratio 1:2, Weight approx. 70 kgDrilling capacity 22The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zeiss Prismo VAST Gold with rotary table Year of manufacture 1999 Retrofit Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Control C98 with control panel BP26_SE Roundtable VAST Gold probe Stylus Changing Magazine 13-Fold Stylus changer plate Pushbutton Accessories Calibration ball Technical documentation Other accessories Workstation with monitor Software Calypso Basic other options of your choice

Zeiss Prismo 7 MPS VAST Gold with rotary table Year of manufacture 1999 Retrofit Last calibration 6/2021 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Control C98 with control panel Roundtable VAST Gold probe Stylus changing magazine 7-fold Stylus changer plate Pushbutton Accessories Calibration ball Technical documentation Other accessories Workstation with monitor Software Calypso Basic other options of your choice

Zeiss Prismo VAST XT Year of manufacture 2003 Retrofit Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Control C99 with control panel VAST XT probe Stylus Changing Magazine 13-Fold Stylus changer plate Pushbutton Accessories Calibration ball Technical documentation Other accessories HP Workstation with Monitor Software Calypso Basic other options of your choice

Packing: 570270870 mmShipping weight: ca. 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ? mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: 400330300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: ? mmno. of flutes: ? groove width: ? mmtotal power requirement: 0 kWweight of the machine ca.: 220 kgdimensions of the machine ca.: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 1000 x 520 mmno. of flutes: 6 groove width: 16 mmweight of the machine ca.: 400 kgdimensions of the machine ca.: 1,20,80,8 mTurning, swivelling and tilting table ( universal table )suitable for FP- 2 L / 3 L / 3 LV / 41 / 426 T-slots 16 mm at 90 mm centres.Table top can be swivelled +- 45° ( or 180° ).Table top can be tilted 4 x 15°.Table load moving/stiff: 1000/1500 kg,Weight approx. 400 kgBearing frame and lifting beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8000 mm, 3000 mm

Large plate field with T-slots Clamping area 8,000 x 3,000 mm Thickness 350 mm. With 12 x T-slots. Total weight approx. 20 t

table diameter: - mmtable load: - ttable height: - mmControl: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mCNC Swivel Rotary Table/ CNC Dividing Apparatusincl. TailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 400 mmtable load: 0,2 ttable height: hor. 200 / vert. Sph. 310 mmtotal power requirement: 0 kWweight of the machine ca.: 0,155 tdimensions of the machine ca.: 0,60,530,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). T ...

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Key data: 120 l/min, 12 W, 7

Text

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtr ...