accessories for machine tools used for sale (1,847)

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

: 000 Dimensions (HxWxD): 800x800x1200 mmweight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg

diameter: 250 mmtool adaptor: 250 length: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 900 mmdepth: 450 mmheight: 1800 mmweight: 0,152 tHigh quality professional tool cabinet.This cabinet consists of two separate boxes that are mounted on top of each othercan be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep.Both shelves are adjustable in height and can hold 150 kg eachShelves are loaded.The drawer cabinet is equipped with 6 drawers of 100 mm height. OneDrawer is 200mm high. Max. load per drawer is 100kg.All drawers are centrally locked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various fixed steady rests for lathes up to center height approx. 600 mm

various machine tables, angle tables, universal tables, clamping cubes, cube tables

Various milling heads for milling machines and gear cutting machines, hobbing machines

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

diameter: 315 mmbore diameter: 91 mmturning speeds: 4000 U/minweight of the machine ca.: 72 kgLike new 2 Jaw power chucks,- Quick change system- 1 set ground jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dürr / Ecoclean Minio 85C Year of construction 2003 The machine is used by us in 1 shift. Washing baskets: L x W x H 36 cm x 21 cm x 20 cm The dimensions of the system are L x W x H 2m x 1m x 2.65m The empty weight of the system is approx. 2,000kg. Location of the machines: 74219 Möckmühl The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

surface area: 800455 mmno. of flutes: - groove width: - mmweight of the machine ca.: tdimensions of the machine ca.: mUniversal swivelling + tilting tableTable top rotatable 360 Tiltable forwards/backwards -15 / 45°Sideways swivelling +/- 30Cross adjustment ( Y ) 160 mmMounting surface 350 x 250 mm ( additional adapter plate )Table surface 800 x 455The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI 40 DIN 69880 number: 22 StückA range of tool holders in good condition.Tool holder size: VDI 40, DIN 69880Were used on a Gildemeister CTX 500 E CNC lathe.Quantity:1 driven tool holder, angled design.18 driven tool holders, straight design.3 standard tool holders.Only sold in a package!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length - max.: 3000 mmfeed length: - mmlength: - mmpower capacity: 2 kWWeight: 1300 kgWith control panel HBG 10A guide channel, size of approx. 60 mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: - ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 0,8 x 0,6 x 0,6 mCoolant tank with pump, little used.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 700 250 mmno. of flutes: 5 groove width: 12 mmtotal power requirement: 0 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 700250320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 90 l/mintank contens: 100 lvoltage: 220 / 380 Vtank dimensions ca.: 800 x 380 x 400 mmheight with motor ca.: 900 mmpower capacity: 2,2 kWweight: 57 kgCondition: unchecked: Base: 820 x 390 x 650 mmThe capacity liter is estimated because on the type of the motor is model KMR 90 L 4.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 800 x 425 mmno. of flutes: 6 groove width: 14 mmtable length: 800 mmtable width: 425 mmtable load: 0,3 ttotal power requirement: kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 0,80,60,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min: ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces )suitable e.g. for OKUMAbox dimensions approx. 500 x 300 x 200 mmweight approx. 50 kg3 x EPPINGER 4.200.231 drilling and milling head3 x EPPINGER 4.200.289 drilling/milling head1 x Drill- Milling head WTO 4 1 06 1 6006 - 401 x COROMANT 410 1200 72 - 40 drilling and milling head1 x 2-jaw chuck KH 1-40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley filledContents and equipment see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St.range L-W-H: 720 x 580 x 800 mmweight: 100 kg: 100Kg je Lade Stable tool cabinet with 6 drawers, lockable.2 x 75, 4 x 100, 1 x 150 and 1 x 200mmInternal dimensions: 620x450 mm.Maximum load per drawer 100kg!Furnishings:32x boxes 75 x75 mm.16x boxes 75 x 150 mm.8x boxes 150 x 150 mm.12x dividers long32x short dividers1x stacking trayFigure with 8 drawers.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 710 x 510 x 900 mmweight: 52 kg: 5 St.Professional drawer cabinet for workshop equipment.Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm.Inner dimensions of the lower drawer 56 x 43 x 17 cm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: - mmShipping weight: 22 kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mmtable load: 0,4 ttable height: 160 mmtotal power requirement: 0 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 0,70,80,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 440 x 1000 mmno. of flutes: 5 groove width: 16 mmtotal power requirement: - kWweight of the machine ca.: 210 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: - kWtool adaptor: KOMET PKB 200-20-112 total power requirement: - kWweight of the machine ca.: 700 kgdimensions of the machine ca.: 1,6 0,7 1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.