CNC Milling Machines used for sale (182)

EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg

Milling machine Mikron WF 32 CH Technical data X-axis: 560 mm Y-axis: 500 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Speed range: 25 - 6,300 rpm Swivel range vertical milling head: +45° Auction-ID: A1-46872-38

TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg

Machine type: CNC Vertical Machining Center Manufacturer / Brand: MÜGA Werkzeugmaschinen GmbH Model / Type: R6040 Year of manufacture: 2011 Serial number: ACMM6 004 Control unit: Mitsubishi M70 CNC Country of manufacture: Germany Worktable: Table size: 700 x 410 mm Max. table load: 250 kg Travel ranges: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Spindle type: Direct drive Tool system: Tool magazine capacity: 12 positions Max. tool diameter: 80 mm Max. tool length: 250 mm Feeds: Rapid traverse: up to 28 m/min Measuring systems: Renishaw tool measurement: yes Renishaw workpiece measurement: yes Electrical data: Voltage: 400 V Frequency: 50 Hz Connected load: approx. 19 kW Dimensions and weight: Overall dimensions (L x W x H): approx. 2,654 x 1,700 x 2,400 mm Approx. weight: 3,300 kg Con ...

AVIA FNE 50N CNC milling machine was built in 2016 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. This is all due to its reliable spindle, which can work both vertically and horizontally, with the same specifications. The AVIA FNE 50N is controlled by an advanced HEIDENHAIN control system, which is distinguished by its intuitive operation and numerous useful functions. The FNE 50N toolroom milling machine weighs 3000 kg. Technical specifications of the AVIA FNE 50N CNC milling machine General data - feed in the X/Y/Z axis: 800/500/420 mm - feed in the X,Y,Z axis: 5-2000 mm/min - rapid traverse in the X/Y/Z axis: 10/10/7 m/min - maximum workpiece weight: 500 kg - spindle rotational speed: 50-4000 rpm - spindle rotational speed adju ...

Machine type: CNC Vertical Machining Center Manufacturer: KNUTH Werkzeugmaschinen GmbH Model / Type: VMC 1400 F Year of manufacture: 2015 Serial number: 159472 Worktable: Table size: 1800 x 800 mm Table height: 880 mm T-slots: 18 mm / 6 slots Max. table load: 2000 kg Travels: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Distance spindle–table: 120 – 830 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Main motor power: 10 kW Feed rates: Rapid traverse (X/Y/Z): 24 m/min Working feed (X/Y/Z): 10 m/min Accuracy: Positioning accuracy: ±0.005 mm Repeatability: 0.005 mm Pneumatics: Air pressure required: 6 bar Air consumption: 400 l/min Electrical data: Installed power: 35 kVA Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight: Footprint: approx. 2980 x 2150 mm Dimensions without / with chip conveyor: approx. 4310 / 5340 x 3150  ...

CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg

Kondia model A-6 vertical CNC machining center for milling, drilling and precision machining operations. Equipped with CNC numerical control, integral protection cabin and vertical spindle. Suitable for the manufacture of complex parts in machining workshops and industrial production. Includes automatic tool changer and integrated cooling system. Auction-ID: A7-47328-35

Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100 i Control -CE marking -Fanuc MXP 100i control -4th axle prepared -Year of construction 2008 / 1x previous owner very well maintained / original paint -Travel X / Y / Z 1270x520x540mm -Rapid traverses X / Y / Z 36m/min / 36 m/min / 24 m/min -Feed speeds approx. 945 IPM (inches per minute) -Distance - table surface to spindle nose 100-645mm -Work table 1350 x 520mm -Max. table load 1000 KG -Spindle speeds up to 10000 rpm -Spindle holder BT 40 -Spindle motor power 11.2 KW - Tool Changer (ATC) 24 stations / side mount type -Tool change time 3.5 se. (T-T) -Electric handwheel -RS 232 interface -Various tool holders -Chip conveyor -Spindle oil cooler -High pressure pump -Oil skimmer -Work light -Machine feet -Machine documentation Dimensions: L x W x H 3.5 x 2.4x2.2 meters / Weight 7000 Kg

Technical data Manufacturer: LID Model: FP3NC Type: FP3NC Serial Number: 2803-2395 Control: DECKEL Dialog 3 Machine type: CNC Universal Tool Milling Machine X-travel: approx. 400 mm (Source: online) Y-travel: approx. 400 mm (Source: online) Z-travel: approx. 400 mm (Source: online) Table size: approx. 700 x 460 mm (Source: online) Tool holder: SK40 (Source: online) Quill stroke: approx. 80 mm (Source: online) Spindle speed: approx. 31.5 - 6300 rpm (Source: online) Drive power: approx. 14.5 kW (Source: online) Machine weight: approx. 1,800 - 2,000 kg (Source: online) Configuration DECKEL Dialog 3 Control Vertical milling head Horizontal spindle Machine vise Coolant Setup Tool holder SK40 WITHOUT! ATTACHED MACHINE VICE Note: No original documentation available. The technical data was researched and adopted on the basis of several matching Internet sources. Auction-ID: A7-47277-3091

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

x-travel: 6500 mmy-travel: 1500 mmz-travel: 2000 mmcontrol: HEIDENHAIN iTNC 530 HSCI total power requirement: kWweight of the machine ca.: 58 tdimensions of the machine ca.: 14,5x7 mThe ANAYAK HVM-65 traveling column milling machine stands for high rigidity, precision and machining performance. Equipped with a Heidenhain iTNC530 HSCI control, this CNC milling machine is ideally suited for demanding heavy-duty machining applications. The proven traveling column design with a fixed distance between column and spindle axis ensures consistent accuracy across the entire working range. The cross movement is performed by the column, eliminating the need for a contoured foundation.The orthogonal milling head with 28/42 kW power output reaches speeds of up to 6,000 rpm and features a precise 0.02° x 0.02° indexing resolution. The rigid auxiliary table offers a large clamping surface of 7,300 x ...

Milling machine Röders RXP 800 DS BJ "007

serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte AusbaustControl: 67 10.221.661 x-travel: 600 mmy-travel: 700 mmz-travel: 550 mmspindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/minautomatic swivel milling head: tool change unit: 30 Plätze: Infrarot-Taster : : : : 600 L: : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mmT-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. There is a complete manual in Czech and German. We also have a probe and accessories (vices, clamps, collets, mandrels, etc.)

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmfeed power: 160 kpspeed: 20 - 200 mm/minrapid traverse: 1200 mm/mintotal power requirement: 1,4 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871table:: table surface area: 700 x 500 mmmax. table load: 500 kgT-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 60 pos.max. tool weight: 6 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange-time tool to tool: 1,6 secchange-time chip to chip: 8,0 secfeeds:: rapid traverse: 24 m/minFeed force ( X / Y / Z ): 4,5 kNfeed speeds: 1 - 24.000 mm/mintotal power requirement: 26 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,3 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 20 bar Rotary screen: elektr. hand wheel: Signal lamp - 4 colour: direct tra ...

CNC portal milling machine Droop & Rein FP160/2 – technically perfect, dismantled Description: For sale is a Droop & Rein FP160/2 CNC portal milling machine, built in 1965, completely overhauled and converted to CNC by the Rottler company in 2003 (investment at the time: €750,000). The machine is equipped with a Heidenhain TNC 430 control system and a Heidenhain LB 382 C length measuring system and guarantees a high precision of ±0.005 mm. All components are technically flawless. The machine is currently dismantled and disassembled in our warehouse in Riesa, Germany, so that assembly, assembly and adjustment are required before commissioning. A viewing of the individual parts is possible. Technical data: Manufacturer: Droop & Rein Type: FP160/2 Item no.: 2698 Year of construction: 1965 (CNC conversion 2003) Control: Heidenhain TNC 430 Length measuring  ...

x-travel: 560 mmy-travel: 460 mmz-travel: 450 mmControl: OSP U10 M total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor

x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmtable surface area: 1000 x 543 mmspindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/minfeed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z axis: 18 / 18 / 15 m/mintable load: max. 350 kgcontrol: HEIDENHAIN MillPlus milling-head swivable +/-: 90 °total power requirement: 26 kVAweight of the machine ca.: 4,2 tdimensions of machine L x W x H: 2,95 x 2,1 x 2,26 mAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine DMG DMU 100t BJ 2003 more technical data and more pictures on request

Dimensions (L/W/H): 1900x1250x1750 mmweight: 600 kgtotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Hurco VMX24 • Travel (X/Y/Z): 610 mm / 510 mm / 610 mm. • Table size: Approx. 760 x 510 mm. • Tool holder: SK40. • Tool changer: 24 places (side-mounted). • Spindle speed: Up to 12,000 rpm • Rapid traverse: Approx. 30-35 m/min (X/Y/Z). • Control: Hurco WinMax 6 1 shift operation May 2018 new spindle from 15,000 to 12,000 Replacement Monitor 30 cm Torisan TM121SV-02L01 LCD TFT available (subject to functionality) without tools and vices Perforated plate included

Dimensions (L/W/H): 2200x1250x1750 mmtotal power requirement: 6,5 kwweight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Manufacturer: Quaser Type: MV 184P/12B Year of manufacture: 2011

Dimensions (L/W/H): 1500x1100x1500 mmWeight: 300 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices

Dimensions (L/W/H): 940x1250x1400 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WE SELL AN NICE WORKING CONDITION HURCOP -BMC-30 CNC Vertical Machining Center HURCO BMC 30/M Year of manufacture: 1998 CNC path control Ultimax X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 k ...

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used CNC valve seat processing machine NEWEN EPOC XL. Working range valve seat diameter 13-240 mm. Valve guide working range 4-20 mm. Max. workpiece weight approx. 900 Kg.

Dimensions (L/W/H): 2200x2000x1950 mmWeight: 700 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)

Dimensions (L/W/H): 2700x900x1900 mmWeight: 800 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine from Reckermann: TYPE: DELTA1300 K X(Longitudinal)/Y(Transverse)/Z(Vertical): 1500x 500x 450 mm Tool holder DIN 2080: SK50 Works flawlessly

x-travel: 400 mmy-travel: 320 mmz-travel: 450 mmControl: Haidenhain TNC 124 drive of main spindle: 3 kWnumber of spindle speeds: 63-3150 u/mintool taper: SK 40 stroke of quill vertical: 60 mmfeed speeds: 5-2000 mm/minrapid traverse: 2 m/minwork table:: 800x320 mmcoolant: 20 l/mintotal power requirement: 5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 2,2x2,4x1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Mikron UM600 BJ 1998 defective

x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 600 x 300 mmspindle taper ISO: 40 quill stroke: 50 mmspindle turning speed range: 50-400 , 400 - 3150 U/minCNC-control: TNC 135 voltage: 380 V / 50 Hzfeeds: X+Z = 5 -1000 mm/minrapid traverse: X+Z = 2,4 m/minfeeds: Y = 5 -670 mm/minrapid traverse feeds: Y = 1,6 m/minmeasuring system resolution capability: 0,005 mmtotal power requirement: 3,7 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 1,8 x 1,70 m• HEIDENHAIN TNC 135 control,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel FP5A CNC milling machine with Dialog 11 control. The machine is mechanically in good condition Stands in a hall almost rust-free. Accessories: Angle table

CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post

Specifications: Manufacturer: Lid Type: FP1 active Control: Heidenhain Active TNC113 Year of Make: 1977 Colour: grey Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: The machine is in very neat original condition. Original lidded cabinet with various mounts and dividing head

x-travel: 400 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain turning speeds: 3150 U/mintable surface area: 700x350 mmTable load: 400 kgspindle taper ISO: 40 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech  ...

Control: Heidenhain TNC 355 x-travel: 1.000 mmy-travel: 400 mmz-travel: 450 mmsurface area: 1.300 x 400 mmfeed range: 1 - 6.000 mm/minnumber of spindle speeds: 60 - 3.600 U/min vertikalnumber of spindle speeds: 30 - 1.800 U/min horizontaspindle taper: SK50 vertical and horizontal milling possible: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions

x-travel: 1190 mmy-travel: 530 mmz-travel: 540 mmtable-size: 1600 x 400 mmspindle drive: 11 kWtool taper: ISO 50 turning speeds: 28-1400 U/minfeeds: 16-800 mm/Utotal power requirement: 21 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.