3 HESS belt grinders used machines

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Key data: 190 mm, 2

Grinding Machine HESS Double-Sided Grinding Machine Type: GLORIA Year of Make: 1995 CE Grinding width 190 mm Grinding thickness 4 – 180 mm Sanding shoe and brush from above Sanding shoe and brush from below Oxyd ceramics are wear-free and therefore maintenance-free Motorized height adjustment with digital display Shortest workpiece length 300 mm oscillating abrasive belts Sanding belt blow-off nozzle Workpiece transport via conveyor belts Sanding belt width 200 mm x sanding belt length 1600 mm Grinding motor 2 x 4 kW Feed speed infinitely variable 5-25 m/min. Feed motor 0.75 kW Height adjustment 0.18 kW Sanding belt speed 24 m/sec. Working height – table height 830 mm Suction connection nozzle diameter 2 x 160 mm Extraction air volume 2x2000-2500 m³/h Machine dimensions: Length 1660 mm x width 1030 mm x height 1820 mm Height with suction nozzle 1930 mm  ...

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Frame press Hess Technical description: - 2 pneumatic pressure cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece holders - Feed bandwidth: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

x-travel: 600 mm y-travel: 350 mm z-travel: 500 mm total power requirement: 3 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 3701 Vertical console milling machine HESSAPP HC 50 et Working area: 600 x 350 x 500 Drive: 2,3 Control: Heidenhain TNC 135 / Indramat Table surface 1180 x 330 mm Speed range 70 - 6000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge Press Hess Type mobil 3000 Machine No. M 2 2791 1538 Year of manufacture 1991 Working length 3000 mm Pneumatic Banding width 60 mm Pressure range 0 – 8 bar 6 press cylinders, pressure plate 120 mm diameter Mobile on castors Heavy version Heating element 0 – 200 °C Solid edge preheating device Length 3200 mm x width 850 mm Weight approx. 450 kg

Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja_yes boring of olive 1=yes, 0=no: 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill h ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----------------------------------------------------- Machine is being checked! Manufacturers description: ----------------------------------------------------- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the ...

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Hess , Type: Rahmenpresse, Year: ca.1995, Work piece width min-max mm: ca.1500, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-90, Working widht max mm: 2500, Hydraulical/pneumatical: elektrisch, Year :ca.1995

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,

Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

Key data: 3100 mm, 16 mm

- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg