shredders used for sale (318)

ID3765 Pallmann PHPH 16-18 (Grizzly) year/Bauahr 1992 Impact hammer mill, 400 kW electric motor, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 Impact hammer mill, electric motor 400 KW, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 pieces

GOOD CONDITION SHREDDER type TEREX Ecotec TDS 820, good condition Year of construction 2020 Only 2700 hours Weight 27500 kg

• Brand: MUTTON, • Model: VB 750 D, • Year of construction: 2001, • Drive: diesel, • engine speed: approx. 2,100 rpm, • Condition: Used, operational, • Availability: immediately, • Engine speed: approx. 2,100 rpm, • Working length: 2,000 mm, • Total shaft length: 2,348 mm, • Length: approx. 7,500 mm, • Width: approx. 2,500 mm, • Height: approx. 3,000 mm, • Weight: approx. 20 t

Technical specifications, · Crusher: Jaw crusher with an inlet opening of approx. 1,100 × 750 mm (in some variants 1,100 × 800 mm), · Performance: Depending on material and settings, the plant achieves a capacity of up to 400 t/h, · Weight: The transport weight is 44.2 t, · Dimensions: Transport length approx. 14.24 m, width approx. 3.00 m, height approx. 3.35 m, · Antrieb: CAT / 179 kW diesel-hydraulic system with load sensing to save fuel, · Year of construction: 1996, · Operating hours: 12,000 h, · Year of construction: 1996, · Operating hours: 12.000 h

·, - Weight: approx. 35.0 t, · Setup time: about 0.5 h, · Max. task piece size: about 800 mm, · Inlet opening: 1,200 × 700 mm, Throughput: dependent on the material, · Year of construction: 2012, · Operating hours: approx. 8,000 h

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

Shredder for waste wood and biomass, 2-stage ( stage 1 = Doppstadt DW 3060 buffalo ---- level 2 = AK 630 ), 2 large magnets INCLUDED, air classifier on the discharge belt included. Completely ready for use. Engine (Volvo approx. 700 hp / 515 KW

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

Model: ARJES VZ 850 DK, Type: Two-shaft shredder, Year of manufacture: 2017, Operating hours: 4,200 h, Motor: Volvo Penta diesel, about 565 kW / 768 hp, Self weight: approx. 26,000 kg, Dimensions (approx.): 8,800 × 2,900 × 3,200 mm (L × W × H), Shredding system: Two-shaft universal shredder, Areas of application:, - Used timber (A1–A4), green cut, - debris, - Mixed waste/tires, model: ARJES VZ 850 DK, Type: Two-shaft shredder, Construction year: 2017, operating hours: 4.200 h, own weight: approx. 26,000 kg, Shredding system: Two-shaft universal crusher

· Machine type: Impact crushing plant, · Model / Type: Remax 1106/11 E/D, · Year of construction: 2016, · Operating hours Crusher: approx. 8,000 h, · Engine operating hours: approximately 10,000 hours, · Breaker type: SBM 11/11/4 RHS, · Inlet opening: 1.040 × 725 mm, · Rotor size: 1.040 × 1.060 mm, · Motor: diesel, · Manufacturer: SCANIA, · Manufacturer: SCANIA, machine weight: ca. 39 t

Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical  ...

• Year of manufacture: 2020, • Operating hours: about 2,200 h, • Rotor: Diameter 860 mm, Width 830 mm, • Drive: Direct drive via coupling, • Crusher box: 4 impact bars, 2 impact plates, • Rear leg unit (in RS): 2.44 m × 1.2 m (8 × 4) with oversize backfeed, • Task opening: 860 mm × 720 mm, • Transport weight: approx. 30 t, • Application: concrete, asphalt, construction debris and natural stone, Task funnel, • Hopper capacity: 2.6 m³, • Task height: 3.0 m, • Width at the back: 2.0 m, • Sieve area: 1,080 × 810 mm, • Year of construction: 2020, • Operating hours: approx. 2,200 h, • Drive: Direct drive via clutch, • Crusher box: 4 strike bars, 2 impact plates, • Transport weight: approx. 30 t, • Funnel capacity: 2,6 m³, • Task height: 3,0 m, • sieve surface: 1.080 × 810 mm

• Model: Lindner Urraco 95 DK, • Year of construction: 2021, • Operating hours: 7,230 h, • Engine: Scania V8 Diesel, 770 HP, • Drive: chain track with rubber pads, • Application: High-performance shredder for wood, trash, plastics, green waste, and root stocks, Including accessories, • 2 sentences shafts one used and one armored, – Suitable for wood, waste, plastic, green waste, and root stumps, – Both sentences are armored and ready for immediate use, • Model: Lindner Urraco 95, • Year of construction: 2021, • Operating hours: 7.230, • Drive: Tracked drive with rubber pads

Year of manufacture: 2021, • Betriebsstunden: 3.200 h, • Weight: approx. 37.5 tonnes incl. post-screen unit, • Engine: Cummins L9 – Stage V, • Post-screen unit: 1-deck incl. oversize return conveyor, • Wind sifter for oversize material, • Radio remote control, • Hopper extensions (8 m³), foldable, • Overband magnet, hydraulically liftable and lowerable, • Water pump for dust suppression incl. spray system, • Staubunterdrückung am Ablassband – Feinstaub, • SBM remote service CRUSH CONTROL including GPS

model: VB 750 D, Serial number: 110/667, Construction year: 11/2008, drive: diesel, engine speed: approx. 2,100 RPM, operating hours: 6.090 h, State: Used, operational, Availability: immediately, Working length: 2.000 mm, Total length of the shafts: 2.348 mm, length: approx. 7,500 mm, width: about 2,500 mm, height: about 3,000 mm, own weight: approx. 20 t

Woodzilla BBT 400 Drum Chipper Year of manufacture: 2023 Engine: Deutz 75 hp diesel Max. trunk diameter: 32 cm Height of inlet opening: 320 x 500 mm 360° machine slewing ring Length of feed table: 1300 mm Crane type: Z-Kraan BenTele -Crane reach: 5500 mm -Telescopic: 1100 mm Radio remote control Chassis: Tandem axle Speed up to 80 km/h Weight: 3500 kg

fire: Taurus, model: C872HD, Year of manufacture: 2010, box length: 7.0 meters, Box / Bale section: 900 x 600 mm, Pre-compression device: Sheet pre-compressor, Shearing force: 800 tons

fire: SCM Technology, model: CM 1000 Mobile, Year of construction: 2001, Length: 9990 mm, Width: 2550 mm, box: 6600 mm, Engine: Diesel engine, Cutting: 900 x 800 mm, General conditions: working, Cutting force: 1000 tons, Weight of machine: 39 t.

Wood chippers, used

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...

The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

• Brand: EUREC, • Model: Z85, • Type: Double-shaft crusher on tracks, • Year of construction: 1999, • Availability: immediately, Weight: approx. 32 tonnes, • Shredder mouth width: 2.30 m, • Shredder mouth length: 1.80 m, • Shaft length: 1.85 m, • Hopper length: 5.40 m, • Hopper width: 2.50 m

• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm

height: 3.600 mm, With conveyor belt: 15.200 mm, Engine: Volvo Penta

•, • Type: MEWA UC 201 rotary shear, • Electric drive: 2 × 75 kW, • Total performance: 158 kW, • Rotor length: about 2000 mm, • Knife size: 80 mm, • Weight: approx. 50 t, • Year of construction: 1999, • Rated voltage: 690 V, • Type of current: 3/PE, 50 Hz, • Rated power: 158 kW, • Rated current: 160 A

model: JLSS2000-#19, • Year of manufacture: 2022, • Operating hours: 35 h (demo machine), • Main power: 2 × 90 kW, • Gearbox type: #119 planetary reducer, • Shredding cavity: 960 × 1430 mm, • Rotor speed: 6–8 rpm, • Working capacity: 15–25 t/h

Mercodor shredder ZM 44 with a cutting space of 600x380 mm and 7.5 kw drive. Complete ready-to-use machine with large base.