shredders used for sale (323)

Magnet L x W x H: 1.075 x 1.710 x 353mm. - Belt: 1.800mm. (new) - AA.: Ca. 1.850mm. - Weight: 3.280 kg.

Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor

Overhauled, with hydraulic-unit, electrical motor and voith turbo coupling. Without frame

Inlet: 1.320 x 680mm. - With Frame, Pre-screen, E.Motors and Spare-jaws.

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted

Inlet size: 1.020 x 700 mm - Rotor W x Dia.: 980 x 1.260 mm - With Electrical motor

Gyratory Vibrating Screen . Deck L x W: 3.000 x 2.000mm. 4 Decks. With 3KW SEW E.Motor and Unused spare-outlet

Type: VX 2078 - Mach. No.: D 6221 / D 6222 - Year of Manufacture: 2005 - Size: 2.000 x 6.000mm - Included: 2 Pcs. Unbalance exciters, Cardan shafts, 30 kW/750 RPM E.Motor and Springs - Can be sandblasted and painted.

L x W: 4.000 x 1.600 mm. - With frame, electrical motor, cardan-shaft and springs

With Electrical motor

Rotor Dia. x W.: 1.000 x 680mm. - Inlet: 690 x 350mm. - Included: 55KW E.motor, control-unit, hydraulic-unit and frame. New spare-parts in stock.

Inlet size: 1.200 x 900 mm - With electrical motor, Inlet and many spare-parts

Inlet size: 400 x 130 mm - With electrical motor - With/without frame - 6 Pcs. (3 sets) new jaws - Crusher will is overhauled, sandblasted and painted

Inlet size: 600 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

With overhauled rotors. Included hydraulic-unit and control panel build in container. With conveyor for outlet.

Inlet Size: 1.800 x 1.400 mm, Included electrical motor and new jaws.

Included hydraulic-unit and control panel build in container. With conveyor for outlet.

Inlet size: 820 x 640 mm - With electrical motor - Crusher will be sandblasted and painted

Inlet size: 400 x 250 mm - With electrical motor

With new 1.500mm. wide belt and new control-unit. Will be overhauled, sandblasted and painted.

Power: 6KW , Ratio: 320:1 , Speed in/out: 1.450 / 4,53 , Shaft ø in: 70mm. , Shaft ø out: 125mm. (hollow)

Specifications Shredder Cutting width: 6 x 40 - 53 mm Year of manufacture: 2018 Power connection: 400 V / 50 Hz the safety level P-4/O-3/T-4/E-3/F-1 wg DIN 66399 Baler Maximum pressure: 4.4 tons Year of manufacture: 2018 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz If you have any questions, please call us: +48 696 072 985

Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Part Number: 7686 SPECIFICATIONS - inlet width 340mm - inlet height 120mm - shaft width 345mm - number of knives 2pcs -sieve - toothed pulling shaft from above and below - shaft motor about 2×1.1kW - electric autorewers (adjustable) - with conveyor belt - length of the feeding belt 3850mm - width of the feeding belt 340mm - Belt feed front/back - main motor 22kW - extraction spigot diameter 220mm - dimensions length/width/height 5300x1500x1500mm - weight about 1500kg ADVANTAGES – made in Germany – with a belt feeder – autorewers – used chipper, very good condition Net price: 43900 PLN Net price: 10329 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Part Number 7685 SPECIFICATIONS - inlet width 440mm - inlet height 300mm - shaft width 480mm - shaft diameter 440mm - number of knives 2pcs - sieve size 50x50mm - toothed pulling shaft from above and below - shaft motor 0.78/1.1kW - electric autorewers (adjustable) - with conveyor belt - length of the infeed belt 4006mm - width of the feeding belt 380mm - Belt feed front/back - main motor 30kW - dimensions length/width/height 6100x1100x1100mm - weight about 2000kg ADVANTAGES – made in Germany – with a belt feeder – autorewers – used chipper, very good condition Net price: 76900 PLN Net price: 18094 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm

Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1993 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3

Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985