shredders used for sale (312)

used Foodwaste shredder with gearbox and engine 11 kw blades 18 mm 2 hooks

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw

This machine with two motors each 11 kw was used for tire recycling complete with hopper and control panel.

the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

We offer complete recondioned Scania engines in exchange

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Lefort BR1260 Shredder for sale. The machine has 10 hammers, 500 Hp electric engine. The machine has a low hours (less than 2.500). THe machine's capacity is around 20-25 tons/hours which means this is an exelent machine. Price is including the separation and conveyor system to, which is including the followings. -Feeding conveyor (1260 mm wide) -Vibrating table -magnet drum (type:BMK 100-180TML ) -1 conveyor for metal scrap with cabin for separation -1 big conveyor for nonferrous and other materials Bbmc3fzwrj -1 magnet belt -1 magnet separation system ( separating the non-ferrous metals from the dust) that system is including a vibrating table, and electric box (type:EC-X650 ) -2 conveyors from non-ferrous metal and for dust. VERY IMPORTANT: Every part of the system and every function works. +Option: We can help you in the diassembling, assembling and in the transport ...

Builder: WILLIBALD Model: MZA 4800 Motor: MAN 353 kW (480 HP) Data: L. 10.700 mm x L. 2.550 mm x A. 3.800 mm Year: 2008 Hourly Production: 160 m³/h Working Hours: 6.800 h N° Rods: 4 Pz N° Hammer: 24 Pz dx – 24 Pz sx Rotor Diameter: 1.000 mm Discharge Belt: A. 3.400 mm x L. 1.450 mm Fuel Tank: 450 L Weight: 16.000 Kg

Builder: WILLIBALD Model: SHARK Engine: MAN 353 kW (480 HP) Data: L. 11.000 mm x W. 2.500 mm x H. 3.950 mm Year: 2014 Working Hours: 3.900 h Hourly Production: 240 m³/h Shredding System: 48 HAMMER Rotor Data: D. 1.000 mm N° RPM Rotor: 1.300 RPM Fuel Tank: 450 L Weight: 18.000 kg

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.500 mm, 77 mm.knives - 2 hooks, 1.500 x 960 mm shredding room, planetary gearbox, Electric motor 75 kW 400v 50hz, Hydraulic pack with 400 lt.tank, loading hopper with oleodynamic pressing unit, hydraulic pack, New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Dimensions 3.400 x 2.000 mm, width: 1.500 mm. , Power: 75 kw

2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics ...

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.000 mm, 40 mm.knives - 1 hook, 1.000 x 700 mm shredding room, planetary gearbox, Electric motor 30 kW 400v 50hz, Hydraulic pack with 125 lt.tank, loading hopper 1.700 x 1.400 mm., New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Weight 2.900 kg ca, Dimensions 1.560 x 2.350 mm - hEIGHT 1.445 mm + supporting structure (max 1,500 mm), width: 1.000 mm. , Power: 30 kw

SATRIND DUAL SHAFT SHREDDER 8/25, 18 KW Motor, N.30 knives, 50 mm thick knives, 1 hook, Sredding Chamber 758 x 700 mm, hydraulic vertical ram, hydraulic pack, control panel, supporting structure, machine offered reconditioned, installed power - used power in work: about 60-65% : 18,5 kW, working width: 759 mm., conditions: reconditioned

SMALL DUAL SHAFT SHREDDER to save on waste disposal, for organic, plastics, light metals, wood, but also PCB, confidential documents, disks, cards from small workshops, canteens, vessels, communities, etc., Small and versatile, can be lodged in a van, along with a small generator to start a profitable door-to-door shredding service., shredding chamber 400 x 350 mm, N. 20 knives 20 mm thick, 2 hooks, n.1 gearbox, N.1 electric motor 5,5 kw (or bespoke), installed power - used power in work: about 60-65% : 5,5 kW (or 3,5 or 7,5 kW), working width: 400 mm., conditions: new machine, type: dual shaft

ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks ( ...

ALL PURPOSE, SHREDDER 1.000 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., Ideal to start your own small business or to be dedicated to a few particular scraps., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 18,5 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.ge ...