saws used for sale (1,281)

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 mm: 165 x 310 mmsaw band length: 2.725 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tThe Z252/DG has the following equipment:- Hydraulic semi-automatic,- Double miter 60° left/45° right- emulsion pump,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

saw blade diameter: 420 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: flat: 160 x 100 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: square: 130 x 80 mmturning speeds: 3000 U/minengine output: 2,0 kWtotal power requirement: 2,0 kWweight of the machine ca.: 190 Kgdimensions: 3,0 x 1,0 x 1,3 mUnderfloor aluminum circular saw- Hydropneumatic semi-automatic- pneum. Workpiece clamping device- Roller conveyor with material stop- Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: flat: 160 x 130 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: flat: 110 x 125 mmsaw blade turning speeds: 3000 U/mintotal power requirement: 1,75 kWweight of the machine ca.: 140 kgdimensions: 1,0 x 0,65 x 1,5 mAlu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hacksaw Fortuna Mitre cuts Cable needs to be replaced. Length 1.20 m Height 1.00 m Width 0.60 m

cutting diameter: 320 mmcapacity 45 degrees: round: 180 mmcapacity 90 degrees: square: 320 x 320 mmcapacity 45 degrees: square: 180 x 180 mmstrokes per minute: 40 - 57 - 80 - 115 1/mincutting speed: 16 - 22 - 31 - 45 m/mindimensions of saw-blade: 575 x 55 x 2,5 mmtotal power requirement: 3 kWweight of the machine ca.: 700 kgdimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m- with mitre cuttingAccessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 560 mmsaw band length: 7.260x54x1,6 mmControl: mit 99 Programmen work height max.: 650 mmChip coveyor: inkl. power capacity - table: 10 HPsawing motor: 650 kWweight of the machine ca.: 4.800 kgdimensions of the machine ca.: 3.400x2.050x2.380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23402 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Infinitely variable belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - With: - Saw blade welder IDEAL -Lighting

pole-switchable motor 1.7 / 2.2 kW Saw blade size max. 275 mm Cutting speed approx. 40 / 80 rpm Mitre infinitely variable by 90° to the left and by 90° to the right Cutting area approx. : 90° profile , square / round : 80 / 80 mm

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mPROMOTIONAL PRICE2-column high-performance automatic band saws from the SBS seriesThe SBS series impresses with its sophisticated technology, high quality and longevityand unrivaled, sophisticated standard equipment.• Modern SNC 20 control for CNC version• Frequency-controlled saw drive• Control buttons with pictograms• Work light• Powered chip brush• Hydraulic belt tension• Clamping pressure regulation• Double vice (before and after the belt)• Creep path for positioning• Bundle tension prepared electrically and hydraulically• Chip conveyorThe SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. W ...

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

cutting diameter: 280 mmsaw band length: 4200 mmcutting width: 280 x 280 mmdimensions of saw-band: 4200 x 34 x 1,1 mmcutting speed: 18 - 115 m/minmultiple feeding: 0 - 6000 mmpower capacity: 3,0 kWcoolant: voltage: 400 Vtotal power requirement: 5,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,35 x 2,40 x 2,00 m- serial-no.: 6082- control: SIEMENS COROS - OP 15- chip conveyor- multiple feeding- coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 320 mm, 5350 mm, 320 mm

Horizontal saw with position control Cutting area round: 320 mm Rectangle cutting area: 320 x 320 mm Band saw dimensions: 5250/5350 x 32 x 1.1 mm Belt speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Weight: 2200 kg

Heinrich Hutze & Co. Metal Hacksaw Manufacturer: Heinrich Hutze &. Co. Type: Metal Hacksaw Electricity: 400V, 16A Machine saw blade: 500 mm Sandflex MM 500-38-2,0 More items - new and used - can be found in our shop! International shipping costs on request!

cutting diameter: 320 mmsaw band length: 4335 x 32(34) x 1,1 mmcutting width: mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,27 tdimensions of the machine ca.: 2,4 x 1,750 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 x 32 mmcapacity 90 degrees: round: 145 mmcapacity 90 degrees: square: 130 x130 mmcapacity 90 degrees: flat: 300 x 80 mmcapacity 45 degrees: round: 105 mmcapacity 45 degrees: square: 115 x 115 mmcapacity 45 degrees: flat: 250 x 60 mmtotal power requirement: 1,8 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 800 x 1100 x 1400 mmDomestic equipments:- stepless, electronic speed control- Optional hydraulically controlled or manual belt arm lowering- Saw arm can be swiveled up to 60 ° right- quick release vice- Band guide with 8 ball bearings- Hydraulic saw blade clamping with clamping pressure display and strip break-off- Including coolant device- incl. machine cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mmcutting diameter: 50 mmrevolutions per minute: 27/54 U/minoutput: 1,5 kwdimensions: 1,4 x 0,75 x 1,3 mweight of the machine ca.: 0,6 kgUsed automatic cold circular saw- 3m roller conveyor- man. lenght stop- Blade hole Ø 32 mm- coolant system- 16 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mm: 10-40 mm: 10-40 mm: 40x10-40 mmcapacity 90 degrees: square: 10-80 mmweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350 x 200 saw band length: 3375 x 27 x 0,9 mmband speed: 18 - 110 m/mintable height: 940 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,61 tdimensions of the machine ca.: 1,5 x 1,75 x 1,9 mDouble miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic coolingFigure is semi-automatic.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 15 - 70 U/mintotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mSPECIAL PRICE!High-performance vertical circular saw VKS 370 (20177/201178)· miter left 60° + right 45°· Vice with double clamping arm· Robust prism guide of the saw head, adjustable dovetail guide.· Chip brush· Automatic cooling· Metal handle for high clamping force· Solid, strong cast iron table· Spring pack· Chip removal brushATTENTION: Price is without saw blade! (saw blade price EUR 204)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 105 mmsaw band length: 1140 x 13 x 0,65 mmcutting width: 100/100x105 mmcapacity 60 degrees: round: mmcapacity 45 degrees: flat: 55 x 55 mmcapacity 45 degrees: round: 60 mmtotal power requirement: 0,18 kWweight of the machine ca.: 18 kgdimensions of the machine ca.: ca.400 x 300 x 350 mmWe must ask you to request machines from us on a daily basis in the near future.Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.Gear drive, automatic belt tension, electronically adjustableBelt speed from 20 to 100 m / minDue to the light aluminum housing, the machine is very light and therefore goodmobile use.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.