saws used for sale (1,281)

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

saw blade diameter: 450/500 mmcutting diameter: mmstroke: mmtotal power requirement: 3,6 kWweight of the machine ca.: 1130 tdimensions of the machine ca.: m- Circular saw - semiautomatic- hydraulicThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mmcapacity 90 degrees: round: 185 mmcapacity 90 degrees: square: 150x150 mmcapacity 90 degrees: flat: 220x150 mm: 110 mm: 100x100 mm: 110x90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 70x70 mmcapacity 60 degrees: flat: 70x70 mmvoltage: 400 Vsawband speed: 35 + 70 m/min.: 230 mmtotal power requirement: 0,75 kWweight of the machine ca.: 195 kgdimensions of the machine ca.: 1280x550x1480 mmDomestic equipments:- stepless, electronic speed control- Optional hydraulically controlled or manual belt arm lowering- Saw arm can be swiveled up to 60 ° right- quick release vice- Band guide with 8 ball bearings- Hydraulic saw blade clamping with clamping pressure display and strip break-off- Including coolant device- incl. machine cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3650x27x0,9 mmspeed: 15-100 m/minvice: 335 mmcapacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260/200 mmcapacity 45 degrees: square: 250/180 mmcapacity 45 degrees: flat: 270x200/200x160 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWweight: 1.105 kgdimensions: 2700x2300x1800 mmFully automatic electro-hydraulic band saw with multi-micro processors andadditionally semi-automatic, semi-automatic-dynamic and manualFunction.- Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with twocontrolled axes that allow for the same material thickness 1000various editing programs, each with a different cutting length and quantity, tooprogram.- Semi-automatic, semi-automatic-dynamic and manual cyc ...

saw blade diameter: 275 mmcutting diameter: 90 mmcapacity 45 degrees: flat: 150 x 100 mmmitter cutting - all-position: 45 °cutting speed: 16/32 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mmsaw band length: 9500 x 54 x 1,6 mmcutting width: 1020 mmcutting capacity - flat: 1020 x 1020 mmcutting capacity - round: 1020 mmspeed: 20 - 100 m/minsawing motor: 4 kWhydraulic motor: 2,2 kWtotal power requirement: 7,5 kWweight of the machine ca.: 5860 kgdimensions of the machine ca.: 4500 x 1700 x 2750 mmAccessories:• Inverter• hydraulical vice• automatical movement to the top via hydraulical cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mmsaw band length: 8200 x 41 x 1,3 mmcutting width: 810 mmcutting capacity - flat: 480 x 850 / 45° mmcutting capacity - round: 480 / 45° mmspeed: 20 - 100 m/minsawing motor: 4 kWtotal power requirement: 6 kWweight of the machine ca.: 3100 kgdimensions of the machine ca.: 3000 x 1200 x 2350 mmAccessories:• Inverter• hydraulical vice• automatical movement to the top via hydraulical cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

very stable automatic with protective lock and max. 275 saw blade

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mmMotor output: 1,2 kW: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 36 + 72 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw band length: 4400 x 34 x 1,1 mmband speed: 15 - 150 m/mincapacity 90 degrees: square: 500 x 335 mmcapacity 90 degrees: round: 335 mm: 330 mm: 320 x 335 mm: 305 mm: 305 x 335 mm: 180 mm: 170 x 335 mmwork height max.: 750 mmMotor Capacity: 3 kWmachine weight ab.: 1320 kgdimensions: 1450 x 2350 x 1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210x210 mmcapacity 90 degrees: flat: 230x185 mm: 150 mm: 150x150 mm: 150x210 mm: 90 mm: 90x90 mm: 90x100 mmdimensions of saw-band: 2450x27x0,9 mmcutting speed: 35/70 m/minwork height max.: 915 mm: 265 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 1550x870x1740 mmZimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position.Standard features:- Hydraulic cylinder- emulsion pump- Eccentric tensioner- Underframe- saw blade- 400V plug 16AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

table-size: 670 x 670 mmthroat: 1030 mmworkpiece height: max. 300 mmsaw band length: min. 4700 mmsaw band length: max. 4800 mmtotal power requirement: kWweight of the machine ca.: 1,0 tAccessories: saw band welding and grinding attachment- table swivelling left / right- hydr. feed in tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

cutting diameter: rund 250 mmcutting diameter: vierkant 230 mmcutting diameter: flach 280 x 200 mmdimensions of saw-band: 2950 x 27 x 0,9 mmsawing stroke: 290 mmweight of the machine ca.: 610 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mmdimensions of saw-band: 2080 x 20 x 0,9 mmtable height: 880 mmcutting speed: 40 + 80 m/min: 170 mm: 125 mm: 150 x 190 mm: 95 x 120 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,24 tDimensions (LxWxH): 870 x 1.550 x 1.740 mm mmMiter band sawDemonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: kWweight of the machine ca.: 0,35 tThe Z252/DG has the following equipment:- hydraulic cylinder,- emulsion pump,- eccentric clamp,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 950 mmband speed: 18 - 110 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,42 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 950 mmband speed: 35 + 70 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,42 tdimensions of the machine ca.: 1,23 x 1,7 x 1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWvice: 340 mmweight: 1240 kgdimensions: 2020x2040x1740 mmElectro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - repeatable to ...

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Sägeblatt-Ø: 315 mmcutting diameter: 100 mmsawblade width: 2,5 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 130 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 100 x 90 mmturning speeds: 18 + 36 U/minvoltage: 400 Vfrequency: 50 Hzpower capacity: 0,75 - 1,3 kWweight of the machine ca.: 220 Kgrange L-W-H: 0,7 x 0,6 x 1,3, m• mitre possibility by adjustment of the sawhead,• self-scrolled vise, self-ajdustable protection cover,• cooling pump with bin,• 2 steps of cutting speed• with under frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mmcutting diameter: 100 mmsawblade width: 2,5 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 130 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 100 x 90 mmturning speeds: 18 + 36 U/minvoltage: 400 Vfrequency: 50 Hzpower capacity: 0,75 - 1,3 kWweight of the machine ca.: 220 Kgrange L-W-H: 0,7 x 0,6 x 1,3, m• mitre possibility by adjustment of the sawhead,• self-scrolled vise, self-ajdustable protection cover,• cooling pump with bin,• 2 steps of cutting speed• with under frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device