saws used for sale (1,177)

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

roll diameter: 420 mmthroat: 410 mmsaw band length: 3150 - 3260 mmsaw band width: 3-16 weight: ca. 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

dimensions of saw-band: 3350x27x0,9 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: flat: 300x260 mmcapacity 45 degrees: round: 200 mmcapacity 45 degrees: flat: 180x180 mm: 130 mm: 120x120 mm: 25 mmmin. dia.: 5 mmwork height max.: 900 mm: 35/75 m/minweight: 710 kgStandard equipment:- Fast miter adjustment by scale- miter turning point is the point of intersection between saw blade and material system,no changes in the length measure- Manual material tension - at each angular position of the saw frame is theMaterial stretched parallel in 90 °- Cutting pressure reduction by weight of the heavy, torsionally stiffSawing frame and fine adjustment depending on the material cross section via hydraulicdamping cylinder- Machine stand with chip collecting tray- saw blade drive with limit stop- Precise saw band carbide roller guideAdditional standard equipment 260 DG-HS:- Hydraulic liftin ...

: 65 mm: 50 mm: 83 mm: 82 mmrest piece length: 40 mm: 6 mmdimensions of saw-blade: 250 x 2 x 1.7 x 32 mmspeed: 50-200 m/minengine output: 7,5 kW: 200 mm/sec.work height max.: 845 mmdimensions: 2225x1950x1980 mmweight of the machine ca.: 2500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts

MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed type RB 1500- Roller conveyor 1500mmGood conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CUTTING RANGE . MIN 10MM TO 75MM CUTTING LENGTH . 5-900 SINGLE STROKE -9999 REVERSE CUTTING SPEED. 0 - 40 MM SEC. INFINITELY ADJUSTABLE BACKWARDS 135MM/S MATERIAL FEED SPEED . MAX. 350 MM/S Pwrxaerqe RESILIENCE. MAIN CLAMP 10500N

: 36/72 m/min: 285 mmdimensions of saw-band: 2950 x 27 x 0,9 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 1,5/1,8 kWWeight: 485 kgOverall size: 1970x1150x1840 mmSemi-automatic function:- Vice closes and engine starts- Saw head lowers for the cut- Engine shuts off- Saw head lifts, vice opensSemiautomatic dynamic system:Manual lowering of the saw blade to the desiredPosition and cycle start via the manual button.Upper position is saved automatically.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2950x27x0,9 mm: 36/72 m/min: 285 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280x220 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmoutput: 1,5 / 1,8 kWWeight: 440 kgdimensions: 1700x1000x1650 mm- with semi-automatic lowering- The CUT CONTROL SYSTEM allows semi-automatic lowering of theSaw bow by the weight of the saw head- The lowering speed is infinitely regulated. Single cuts can do sobe carried out with uniform feed- The SHARK 282 CCS has a turntable for double-sided miter. The cutalways takes place in the same grooveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350x32x4 mmvice: 180 mm: 1700/3400 U/mincapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180x70 mmcapacity 45 degrees: round: 120/110 mmcapacity 45 degrees: square: 100/95 mmcapacity 45 degrees: flat: 135x60 mmoutput: 2,2 kwweight: 225 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 x 2,5 mm: 15/30/45/90 U/minvice: 190 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180x95 mm: 90 mm: 90 mm: 110 mm: 95 mm: 125x95 mm: 110 mm: 95 mm: 125x95 mmtotal power requirement: 1,8/2,5 kWweight: 410 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Behringer-KS-400-HY-01[printfriendly] X Attention –––Promotions! X Some prices are available until X 31.10.2015 reduced by 20% Hydr. Hacksaw Behringer KS 400 HY Make: Behringer Type: KS 400 HY Masch.-Nr.: 688286 Year of manufacture: 1998 / 2015 tüp. Comm. No.: 3990600/009 Special fixed price: 5.940,- € | now 4.752,- € Specifications Sawing range up to: Ø 400 mm, 350 x 350 mm, 380 x 300 mm Saw blade dimensions: 650 x 50 x 2.5 mm 3 lifting speeds: 40 / 62 / 90 strokes/min. Drive power: 3.0 kW Weight: approx. 820 kg Footprint: W 1.80 x D 0.65 x H 1.25 m Machine color: off-white/red Equipment 3 lifting speeds Stepless cutting pressure adjustment Prestressed plate guide of the saw bracket Dust-tight closed gearbox Accelerated return stroke of the saw bracket Closed Oil Hydraulic System Coolant Setup Limit stop sw ...

SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm

range L-W-H: 400x300x200 mmsaw diameter: 420 mmweight of the machine ca.: 3500 kgProducer: KASTOType: HBA 420UYear of manufacture: 1985Dimensions (width x height x depth): approx. 400x200x300 cmAt7ZcqFully automatic NC horizontal bandsaw1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - E.- Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 210 mm - Flat approx. 240 x 190 mm - Square approx. 210 x 210 mm - Cutting range at 45° round approx. 150 mm - Flat approx. 150 x 100 mm - approx. 130 x 210 mm Square approx. 145 x 145 mm - Lifting speeds + cutting speeds adjustable - Stroke rates 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre adjustment Vise with opening width up to 260 mm - E.-Mot. Coolant Setup - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg

Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

cutting diameter: 460 mmsaw band length: 0/ mmtable height: 0/ mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 500 mmcapacity 90 degrees: square: 420 mm: 600x400 saw band length: 5320x34x1,1 mmband speed: 15 - 100 m/mintable height: 805 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,45 tdimensions of the machine ca.: 1,72 x 2,5 x 2,5 mDouble miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I• miter left + right 60°• Frequency-controlled saw drive• 34 mm saw band height• Wear-free material support turntable, ball-bearing• To position the saw blade guides using a very wide linear guide• Strong, robust gearbox• Large chipboards• 2 integrated support rollers left and right• Removable chip tray (disinfection)• Free-standing control panel, safe and ergonomic• Storage space for tapes, consumables• Hydraulic cutting pressure control valve• Material height sensor (automatic cut start detection)• Preload super fast (front loadi ...

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Offer gebr. Pipe saw, pipe cutting and chamfering machine Fabr. GF Type RA6 Specifications: Tube Outer Diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz Stepless speed 150 -270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate used, in good condition

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame