saws wood used for sale (1,106)

1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

EWD ESTERER HD_30 SVhigh in TOP ZUSTAND ! Repairs 2009, with powerPos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mmspeed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: rightpressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaetter, ...

Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good

Length 7m, 6 pull-off chains, New condition!; as good as new

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details.

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

Carriage 3,80 m.Motor power: 7,5 kW Saw-blade tilting: 0° bis 45° Cutting height: max. 157 mm with sawblade Ø 500 Rotational speed: 3000 - 3600 - 4200 rpm Cutting width: 1300 mm Scorer with 2-axes electrical positioningRipfence with motorised postioning

Carriage 3,30 m.Motor power: 5,5 kW Saw-blade tilting: 0° bis 46° Cutting height: max. 87,5 mm with sawblade Ø 315 Saw-blade diameter: 250 - 400 mmRotational speed: 4000-4800-6000 rpm Cutting width: 1250 mm Scorer with 2-axes electrical positioningRipfence with motorised postioning

Automatic panel sizing beam saw with rear lifting tableMax panelsizes when rear loading: 5600mm x 2240mmMax. cutting length x width: 5600 x 5600 mm.Max. stack weight for the lift: 10 tonmax stack height 580 mmSaw blade outstand: 125mmMain cutting motor 13,5 kWSawblade diameter 450 mm.Scoring saw motor 2,2 kWFeed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/minSpeed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm.5 air flotation tables in the front 2810 x 650 mmControlls: CAD-matic 4.0

Cutting capacity: 4300 mm x 4300 mm.Sawblade height: 125 mm.Main motor 13,5 kW / scoring motor 2,2 kWSaw-carriage speed: 1-150 m/min. Returnspeed 150 m/min.Programm fence speed: 90 m/min (limited to 25 m/min)7 grippers, centers 75/275/475/1075/1825/2625/3425 mm.Machine control: CADmatic 4 – ProfessionalHardware: Windows XP (US) TFT displaySoftware showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.

Cutting capacity: 4300 mm x 4250 mm.Sawblade height: 95 mm.Main motor 13,5 kW / scoring motor 2,2 kWSaw-carriage speed: 5-130 m/min. Returnspeed 130 m/min.Programm fence speed: 80 m/min (limited to 25 m/min)7 grippers, centers 75/275/475/1050/1850/2650/3450 mm.Machine control: CADmatic4 air tables of 2160 x 650

motor: 3 kWstroke: 60 cmmotor (saw) tiltingangle arm can be changedsawblade diameter: 350 mm

Saw pulley diameter: 914 mm (34 )Saw pulley width: 90 mm (3,5 )Max. sawblade width: 90 mm (3,5 )Sawblade length: 5384 to 5587 mmMax. cutting height under the guide: 406 mmMax. opening feed rolls to sawline: 228 mm.Max. opening fence to sawline: 228 mm.Main saw motor: 15 kWFeedmotor: 1,1 kWTabel height from floor level (with pit): 812 mmTotal height from floor level: 2184 mm.

Automatic cross-cut saw with programmable pusher, left-to-right operationPusher fitted with a fluorescent camera for detecting chalk markings and measuring lengthMaximum material input length: 6,850 mmWood width: max. 375 mmWood thickness: max. 125 mmSaw blade diameter: 450 mm.Saw motor: 5.5 kWFeeder speed: approx. 60 m/minOutfeed table: 3 mTigertouch software15 industrial touchscreen PCTigerlink for downloading cutting listsTigeroptimizer optimisation softwareLaser marking for trimming out defectsZebra label printer

Saw blade length: 4390 mmCutting height: 345 mmmax. cutting width: 585 mmWheel diameter: 600 mmEngine 2,2 kWTable 680 x 680 mmSaw blade guideFoot brake

Table dimensions 830 x 600 mm, 30° tiltableWheel diameter 600 mm.Wheel width 25 mm.Max. cutting height 295 mm.Max. cutting width 510 mm.Cutting length: 4380 mm.Motor power 2,2 kW.Extraction nozzle diameter 80 mm.

This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information.

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

Creel Gang Saw Esterer Type: SS 71 Cutting width 710 mm 300 rpm behind the gate roller conveyor 6.5 m long x 1.40 m wide x 0.50 m high at the end of the roller conveyor left-hand ejector, then cross conveyor that conveys to the roller conveyor to the resawing saw Esterer DKV/E resawing saw is offered separately everything in operational condition Dismantling by the buyer Forklift can be used during dismantling

Resawing saw Esterer Type: DKV/E – 1A Cutting width 750 mm Cutting height 160 mm Motor 30 kW / 380 V / 56 A 2960 rpm hydraulic width adjustment with rod with roller conveyor behind it 9 m long x 800 mm wide Roller conveyor with ribbed discharge roller

Technical data Cutting length 3200 mm Cutting width (program pusher travel) 3100 mm Saw blade protrusion 80 mm Collets 6 pieces of which the first 3 pieces are two-fingered, all others are single-fingered, pitch 75/275/475/1200/2000/2700 mm measured from the angle ruler to the middle 1 additional single-fingered collet position 650 mm Air cushion table 1800 x 650 mm 3 pieces, each with a roller element Program slider speed: forward 25 m/min, reverse 80 m/min Automatic cutting height yes Adjustable collet contact pressure yes Adjustable pressure beam contact pressure yes Angle pressure device min. pressure width 0 mm max. pressure width complete cutting length Main saw motor 9.2 kW Dimensions main saw blade 310 x 4.4 x 60 mm Scoring saw motor 1.1 kW Dimensions of scoring saw blade 200 x 4.45 - 5.25 x 45 mm Operating voltage 400 V (+10%/-5%) / 50 Hz Electr. Connected loa ...

Sawmill with Esterer creel, 2 hemmers, roller conveyors, sharpening machines 1. Esterer HDN 600 SV creel, cutting width 600 mm with width adjustment and hydraulic saw clamping, creel motor 55 kW, 300 rpm. 2. Cross-cut saw right + left behind the creel 3. Timber intake approx. 30 m in front of the gate 4. Roller aisles behind the gate left-right discharge approx. 35 m wood according to the pre-cut model can also be discarded left-right, to the resawing saw ester cutting height 160 mm, Cutting width approx. 600 mm, motor 50 kW. 5. Gate carriage with control for modeling, transporting and throwing the boards. 6. Additional control panel with 2 control panels 1 x for gate and 1 x for model, transport, drop. 7. Roller hemmer Link cutting height 160 mm, cutting width approx. 600 mm with semi-automatic for batten boards with length sorting, motor approx. 50 kW 8. Sharpeni ...

Key data: 45 °, 3200 mm, 1300 mm

Gebr. Sliding table saw ALTENDORF WA80 Year 2005 Motor power: 5.5 kW Scoring unit: 0.75 kW 45° swivel Height and swivel adjustment: electric Digital display for swivel Sliding carriage length: 3.20 m Cutting width rip fence: 1.30 m Max. saw blade diameter: 400 mm max. cutting height: 130 mm 4 speeds: 3.0 / 4.0 / 5,000 rpm Suction nozzle: 120 + 80 mm Weight: approx. 850 kg The saw comes from a 1-man operation.   Manufacturer information

Key data: 1 kW, 4800 kg, 9 kW

Technical data/equipment: - Cutting area 4,300 x 4,300 mm - Main saw unit 9 kW - Saw blade Ø 320 mm - Max. saw blade protrusion 77 mm - Scoring saw unit 1.1 kW with pneum. Lowering in the return flow - Scoring saw blade Ø 150 mm - Pro-Lock quick-clamping system for main and scoring saw blade - Feed speed infinitely variable 5-100 m/min, return 130 m/min - Material pusher flow 25 m/min, return flow 80 m/min - Autom. Cutting length detection via laser sensor - Autom. Edging device - Stepless electr. Cutting height adjustment - 4-air cushion tables with support rollers, length 2300 mm - 9 package clamps, opening height 75 mm - Control panel/stop side left - Label printers - Weight approx. 4,800 kg - Electrical connection: 400V, 50Hz, 3~, 28A, 9.0 kW, rec. Fuse 32A - Compressed air connection: min. 8 bar permanent, connection 1/2", air consumption 360 NL - Extraction ...