saws wood used for sale (1,057)

1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

EWD ESTERER HD_30 SVhigh in TOP ZUSTAND ! Repairs 2009, with powerPos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mmspeed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: rightpressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaetter, ...

Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good

Length 7m, 6 pull-off chains, New condition!; as good as new

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details.

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

Carriage 3,30 m.Motor power: 5,5 kW Saw-blade tilting: 0? bis 46? Cutting height: max. 87,5 mm with sawblade ? 315 Saw-blade diameter: 250 - 400 mmRotational speed: 4000-4800-6000 rpm Cutting width: 1250 mm Scorer with 2-axes electrical positioningRipfence with motorised postioning

Cutting capacity: 4300 mm x 4300 mm.Sawblade height: 125 mm.Main motor 13,5 kW / scoring motor 2,2 kWSaw-carriage speed: 1-150 m/min. Returnspeed 150 m/min.Programm fence speed: 90 m/min (limited to 25 m/min)7 grippers, centers 75/275/475/1075/1825/2625/3425 mm.Machine control: CADmatic 4 ? ProfessionalHardware: Windows XP (US) TFT displaySoftware showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.

Cutting capacity: 4300 mm x 4250 mm.Sawblade height: 95 mm.Main motor 13,5 kW / scoring motor 2,2 kWSaw-carriage speed: 5-130 m/min. Returnspeed 130 m/min.Programm fence speed: 80 m/min (limited to 25 m/min)7 grippers, centers 75/275/475/1050/1850/2650/3450 mm.Machine control: CADmatic4 air tables of 2160 x 650

Saw pulley diameter: 914 mm (34 )Saw pulley width: 90 mm (3,5 )Max. sawblade width: 90 mm (3,5 )Sawblade length: 5384 to 5587 mmMax. cutting height under the guide: 406 mmMax. opening feed rolls to sawline: 228 mm.Max. opening fence to sawline: 228 mm.Main saw motor: 15 kWFeedmotor: 1,1 kWTabel height from floor level (with pit): 812 mmTotal height from floor level: 2184 mm.

Cutting length up to 6200 mmCutting width up to 600 mmMax. cutting height 215 mmSaw blade diameter 400 to 650 mmMotor 15 kWFeed speed of the saw carriage, infinitely adjustable 0 - 80 m/min, motor 2,2 kWDust extraction connection: 2 x 160 mm diameterRequired extraction capacity 4340 m3/h

motor: 3 kWstroke: 60 cmmotor (saw) tiltingangle arm can be changedsawblade diameter: 350 mm

Saw blade length: 4390 mmCutting height: 345 mmmax. cutting width: 585 mmWheel diameter: 600 mmEngine 2,2 kWTable 680 x 680 mmSaw blade guideFoot brake

Table dimensions 830 x 600 mm, 30? tiltableWheel diameter 600 mm.Wheel width 25 mm.Max. cutting height 295 mm.Max. cutting width 510 mm.Cutting length: 4380 mm.Motor power 2,2 kW.Extraction nozzle diameter 80 mm.

Table dimensions 1080 x 700 mm, 30? tiltableWheel diameter 800 mm.Wheel width 40 mm.Max. cutting height 350 mm.Max. cutting width 660 mm.Cutting length: 5620 mm.Motor power 4 kW.Extraction nozzle diameter 120 mm.

This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information.

Key data: 2 kW, 5000 kg, 14 kW

Homag SawTeq B-300 flexTec with Yaskawa D200 robotter Brand: Homag Type: B-300 flexTec/Profi HPP300/43/43/F M-No.: 0-240-69-1263 Year of Make: 2020 Control: Cadmatic 5 Ardis Data Control Labeler: Pica II Robotter: Yaskawa DX200 Total connected load: 80A saw, shredder and 14.4A robotter 35A Crusher Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 80 mm Saw height: 72 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 8 Program Trolley Feed: Step-Free Air cushion device 4 pcs, with between filling plates Table dimensions: 1 (1,760650) + 3 (2,170650) mm Additional features of the machine: Connection to storage system Yaskawa DX200 Robotter: Brand: Yaskawa DX200 Type: Eres-MPL0300-E00 M-No.: 201153 Year of Make: 2020 Robot system: YASKAWA ...

Wood Band Saw manufactured in 2003. This WOOD-MIZER LT40 features a fully hydraulic system and is powered by a 3-year-old Kohler petrol engine with 1100 hours of use. The total operating hours are 4300, and the saw was fully serviced in 2026, ensuring it is fully functional. If you are looking to get high-quality sawing capabilities, consider the WOOD-MIZER LT40 machine we have for sale. Contact us for further details.

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

Multi-rip saw Manufacturer: Raimann Model No.: KS230 Year of Make: 1992 Saw Motor 22KW

A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible.

Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details.

Key data: 45 °, 3700 mm, 1000 mm

Experience precision and quality with the Altendorf sliding table saw type F45, an indispensable tool for any woodworking. Equipped with a robust 5.5 kW motor, this high-quality device enables clean and efficient cuts in a wide variety of wood species. The machine is characterized by its space-saving requirement of only 23002900910 mm and is easy to position with a weight of around 1000 kg. Made in Germany in 1992, the circular sawmill stands for durability and reliability. Its country of origin and year of manufacture guarantee excellent workmanship and technology that is specially tailored to the requirements of woodworking. Ideal for craftsmen and professionals who value precise results and solid workmanship. Various accessories according to photo Test run possible, only collection, help with loading possible. Prepayment or cash on pick-up No Guarantee or Warranty