Cut-off saws used for sale (68)

PAUL CNC cross-cut machine 18KE - year of construction 2019 - unused - luminescence probe - 11 kW For sale is a PAUL CNC cross-cut machine model 18KE, built in 2019 The machine was originally ordered for an industrial project and has never been used in production. The original PAUL delivery documentation with detailed equipment is available. The 18KE is part of the PAUL series of CNC optimisation cross-cut saws for heavy timber. In particular, the 18KE is designed to cut defects by means of luminescent switches and chalk marking. Technical data o Manufacturer: PAUL Maschinenfabrik GmbH & Co. KG o Type: CNC cross-cut machine 18KE o Year of construction: 2019 o Ready for shipment according to delivery note: 09.11.2020 o Machine weight: approx. 1,850 kg o Connection: 400 V / 50 Hz o Connected load: 17.6 kW o Saw blade: HM, Ø 800 mm o Saw blade bore: 100 mm o Saw blade spee ...

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 199. Cutting height: 125mm Stroke: 450mm Saw eleavation: 90mm Saw diameter: ø400mm Arbor: ø30mm Motor: 3 kW RPM: 2800 rpm Dust extraction: 2x 100mm

Key data: 500 mm, 180 mm

Under-table cross-cut saw Cutting width approx. 500 mm Cutting height approx. 120 mm Cross-cut movement from below, continuous from front to back Capping is triggered by foot switch Motor approx. 3 kW Saw blade diameter 500 mm, saw blade HM-tipped Suction connection on the saw body at the back bottom Diam. 100 mm on each side roller conveyor 3000 mm long, roller length 500 mm, Roll diameter 80 mm, roll spacing from center to center 205 mm One roller conveyor with 2 sliding length stops External dimensions: L 6800 mm x W 950 mm x H 1300 mm

Graule Model ZS 135/N (tilting and swivelling) Motor: 2 or 3 KW 400 Volts Cutting height: 135 mm – 90°, 92 mm – 45°tilted Stroke: 460 mm – 90° and 320 mm – 45° Saw: 350 mm Swivelling: 45° – 90° – 25° Titling: 45° – 90°

Key data: 420 mm, 170 mm, 115 mm

400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand

OMGA T55 300: 3 pcs. for sale Manufacturer: OMGA Type: T55 300 Year: 1990-10 M. Nr.: 199899 Max. saw height: 75mm Max. saw length: 135mm Saw diameter: ø300mm Diameter zaagblad as: ø30mm Motor: 1,2 kW Speed: 3000 tpm Dust extraction: 80 Condition: Functionel tested

Key data: 500 mm, 125 mm

Safe-Solid-Fast The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2 hand control - Protective shield rigid - 1 meter roller conveyor to the right of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece of pneumatically swivelling stop with 200 mm Length and control switch on the saw frame - 1 piece HM saw blade 500 mm, Z = 108 Technical data: Maximum Cutting Range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW ...

Holtec mobile cross-cut saw Type PICCOLO Year of manufacture 2011 CE Cutting length of the sword 1540 mm Suitable for cross-sections of max. 1150 x 1150 mm Motor power 7.6 kW, 14.5 A, 400 V, 50 Hz

DeWalt 722KN -XS Manufacturer: DeWalt Type: 722KN-XS M.Nr: 00180 Cutting height: 90mm Stroke: 510mm Saw diameter: ø300mm Arbor: Ø 30mm Motor: 3 KW RPM: 2650 rpm Dust extraction: 2x 100mm Weight: 115 kG

Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 20 ...

Number of motors: 1 Stück0: , mmControl: , 0cutting width: 115 und 82 mmCutting height: 55 mmMotor output: 2.0 kWmachine weight ab.: 45 kgGraule KS crosscut saw for cutting (glass) beads with a rebated jointwith manual and electronic length stop Suitable for wood, PVC, aluminum-----------------------------------------------Brief manufacturers description:- Crosscut and miter saw for precise and user-friendly cutting to lengthin the strip area- Sturdy gray cast iron construction- A double ball-bearing axle acts as a pivot point belowthe material support table, facilitating material cutting. The cutis always made at the rear top.- Quick miter adjustment up to 45°- Readjustable fixed stops at 90° and 45°- Upper saw blade guard can be connected to extraction system-----------------------------------------------Technical data:Motor: 400 V / 2.0 kWSpeed: 2,800 rpmMax. cutting width: 115 mm ...

Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction

Omga Radial 600P3S Manufacturer: OMGA Type: Radial 600P3S M.Nr: 163864 Max. saw height: 90mm Max. saw length: 505mm Saw diameter: ø300mm Saw spindle: Ø 30mm Motor: 3 kW Speed: 3000 tpm Dust extraction: 80mm Weight: 190 kG Condition: functional

Key data: 300 mm

TECHNICAL DATA: Saw blade: Ø 300 mm Installed power: 3 hp EQUIPMENT: 02 Infeed and outfeed roller conveyors, each with a length of 1900 mm

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222415 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

Key data: 800 mm

Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222420 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

Manufacturer: Harwi Type: 625-U Year: 1998 Swivelling: 0-45° Tilting: 0-45° Cutting heigth: 135mm Cutting length: 625mm High adjustment: 50mm Saw: Ø 400mm Saw arbor: Ø 30mm Motor: 3 kW Toerental: 2800 tpm Dust extraction: 2x 100mm

Key data: 300 mm

SPECIFICATIONS: Saw blade: Ø 300 mm Installed power: 2.5 HP Voltage: 380 V EQUIPMENT: 01 Workbench

Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive

Key data: 600 mm, 150 mm

Cross-cut saw with saw blade D 600 Roller conveyors at the entrance material Roller conveyors at the outlet material with folding stop W 250 mm Roller conveyors can be expanded per metre

DeWalt 1600S Manufacturer: Dewalt Type: 1600S M. Nr: nn Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 1994 Thickness: 125mm Stroke/sawlength: 450mm arial: 90mm Saw blade-outside diameter: ø400mm Saw blade-inner diameter: ø30mm Motor: 3 kW RPM: 2800 tpm Dust extraction: 2x 100mm

Cross-cut line Opticut 150 -4 4 ejections built in 2004

DeWalt 1600 Manufacturer: Dewalt Type: 1600 Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

I sell an automatic pneumatic cross-cut saw GreCon Dimter 2004, built in 1992. Entrance table automatic / continuous system Exit table 3 ejectors on the left outlet table. Length: 15.50m Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. Spare parts and documents included.

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC COMBO 500 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -Pos. 1: Legend 500 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for  ...

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw-------------------------------------------------- -----------Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm.When sawing stacked boards h max. 100 mm.The structure is made entirely of thick-walled and reinforced throughoutpainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cutting control in ergonomic position.Engine power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for weight balance and longevity. Shock absorbing system.Independent pneumatic adjustment options to adapt to differentTypes of processing.Durable and easily replaceable saw blade adjustment bar.HM circular saw blade, diameter 500 mm, Z=108.Pneumatic upp ...

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

Cutting height: 125x220 mmmachine weight ab.: 450 kgMotor output: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

cutting width: max 610 mmCutting height: max 200 mmSaw blade diameter: 650 mmMotor output: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-c ...

Dimensions (L/W/H): 4360x900x1450 mmWeight: 560 kgTotal power requirement: 10 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

Dimensions (L/W/H): 0x0x0 mmWeight: 900 kgTotal power requirement: 5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

Dimensions (L/W/H): 3940x850x1350 mmWeight: 410 kgTotal power requirement: 5,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

Dimensions (L/W/H): 0x0x0 mmWeight: 1000 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

Dimensions (L/W/H): 3900x2230x3900 mmWeight: 1500 kgTotal power requirement: 18 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Dimensions (L/W/H): 3000x1070x1200 mmWeight: 1150 kgTotal power requirement: 10 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

Dimensions (L/W/H): 4500x1200x1200 mmWeight: 1500 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.