presses for wood used for sale (312)

pressure: 250 tdistance between columns: 900 mmstroke: 300 mmtable surface area: 850x900 mmram surface: 800x880 mmstroke: 300 mmtable height: 1050 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Short-cycle press Fabr. Dieffenbacher Dimensions plates: 560 x 220 cm Heating Medium: Thermal Oil

Edge Press Hess Type mobil 3000 Machine No. M 2 2791 1538 Year of manufacture 1991 Working length 3000 mm Pneumatic Banding width 60 mm Pressure range 0 – 8 bar 6 press cylinders, pressure plate 120 mm diameter Mobile on castors Heavy version Heating element 0 – 200 °C Solid edge preheating device Length 3200 mm x width 850 mm Weight approx. 450 kg

Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size

Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

Diaphragm press Friz type MFP 15/27 • Cover table size (mm): 2700 x 1500

Bürkle Multifoiler Model BTF 1628/60 Year 1997 Plant for coating smooth and formed MDV parts with thermoplastic films, of roll or as a cut, for film PVC,PP,high gloss PVC,ABS. Suitable for thermoforming or membrane process. Max part size 1250x 2550 mm/ Divide thickness 6-35 mm Hot plate dimensions 1600 x 2800 mm max heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw Weight 16,5 t

Frame Press - Edge Press Standing / Vertical workpiece dimensions - Solder: 2500mm - Width: 1250mm Press pressure motorized, 3-stage

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Working width: 3500 mmWorking height: 2650 mmNumber of cylinders: nach Wahl St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.Stable frame welded construction of thick-walledSpecial hollow profiles , sliding table and pressure beam with50 mm hole pattern .On the left side continuous abutment for grouting the wide ,lower abutment in 2 levels.Vertical pressing cylinder on specialty bar with one-quick adjustment with weight compensation in the 50 mm hole patternadjustable in height. Long sliding table ensure thecontinuous recording of high jacking forces .Fast, smooth width adjustment with ball bearingCarriage with central fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height andequipped with counterbalance .Lower horizontal pressing cylinders with bore fortwo abutments levels without weight compensation .Abutment and pressure plate depth 100 mmMachine controlled electro -hydraulic with 2 pieces vertical ...

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.weight: 2000 kgDimensions (L/W/H): 5550x1300x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Briceder press RSN SP 250 P Don't. # 02 782 Without a control cabinet/control Without hosting 700 l cooling water tank available for hydraulick units L x B x H: 120 x 80 x 120 cm Built in 1992 Weight about 750 kg Dismantling by buyers The machine is in good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12