presses for wood used for sale (312)

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Capacity: 2 x 2.70 m.3 x vertical pushers2 x horizontal pushersPneumaticMobile

Capacity: 3000 x 1900 m.4 x horizontal presses2 x vertical pressure beamsHydraulic pump with 3 kW motor

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW

Working height 900mmNominal width 1300mmEffective working width 1270mmRolling pressure force max 40kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 1000mmPlate thickness min 3mmPower supply 2,2kWDrive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Electrical spindle drivemin/max furniture length: 20 cm / 2m50min/max furniture height: 20 cm /1m25max furniture width: 65 cmWorking height: 50 cmPressure horizontal and vertical: 0 - 1200 KpTotal power installed: 3 kW

Throughfeed carcase clamp Carcases:Width: 280 to 1320 mmHeight: 250 to 2800 mmDepth: 150 to 800 mm.Working height in the press: 500 mmMechanic clamping (electrical motors)

Corpus press manufactured in 2003. This PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer features workpiece dimensions with a cabinet height ranging from 300 mm to 2500 mm, a width of 300 mm to 1300 mm, and a depth of 160 mm to 700 mm. It requires a minimum room height of 3700 mm and operates at a working height of 930 mm. If you are looking to get high-quality veneer processing capabilities, consider the PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer machine we have for sale. Contact us for further details.

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine.

Laminating press manufactured in 2001. This WEMHÖNER KT-F-1E features a pressing area of 5,750 mm x 2,200 mm, with pressing plates measuring 2,600 mm and 2,620 mm in length. The machine accommodates thicknesses from 6 mm to 40 mm and operates at a pressure of approximately 40 kg/cm². If you are looking to get high-quality laminating capabilities, consider the WEMHÖNER KT-F-1E machine we have for sale. Contact us for further details.

used vacuum press with 3 paternoster magazines Brand: Wemhöner Type: Variopress - Basic Year of construction: 2018 Technical data Heating plate format (mm) 2850 x 1550 Electric heating plate design Aluminum heating plate top Total pressing force (kN) 2400 Chamber pressure max. (bar) 6 Operating temperature max. 180 degrees Celsius Batch or workpiece size max. (mm) approx. 2460 x 1180 Thermoplastic film in rolls Width of the film: approx. 1430 mm Thickness of the film (mm) approx. 0.25 - 1 Pressure chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

Briquette Press Spänex Briquetting press Type SHB 100 K2 Year of construction: 2011 Pressing capacity 100 kg/h depending on material Flow rate 0.7 m³/h depending on material Briquette shape octagonal 127 mm x 72 mm Hydraulic motor 7.5 kW PLC Program Shb60-125 Chip container size 1500 mm x 1500 mm x height 600 Chip container with agitator and feed screw With level monitor Temperature monitoring Operating hours according to the counter Hydraulic pump 1407 h Duration 142 h Filling cylinder 455 h Press cylinder 1050 h With cyclone Weight of the press 570 kg Almost all shredded materials can be briquetted with a residual moisture between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Briquettes ...

Altec gluing star Type EB3 6/12 B Year of manufacture 1997 Gluing stars with 3 pressing surfaces 3 pressing surfaces per level 3740 mm x 1050 mm Minimum press length approx. 400 mm Gluing thickness approx. 10 mm – 80 mm Presses pneumatic Rotate manually Compressive force per pressure beam (10bar) approx. 3000 kg Pressure beam stroke approx. 50 mm Dimensions approx. 4500 mm x 1700 mm x height 1900 mm Weight approx. 1800 kg

Pressing area: 3000 mm x 1800 mm; Design: free-standing; Working Area: 1460mm x 2900mm; Number of manual hydraulic cylinders: 4; Pressing pressure per cylinder: 2000 kg; Cylinder stroke: 70 mm; Hold-down: 1; Machine length: 2900mm; Machine width: 900mm; Machine height: 2000mm;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

working width: 630mm; feed: 7m/min;

Pressing Area: 2200mm x1100mm; Aperture: 360mm; Heating: electric; Plate surface: ALU; Emergency shutdown: no; Press pressure: 65t; Number of cylinders: 4; Current consumption: 21A; Machine length: 2500 mm; Machine width: 1300mm; Weight: 2600kg;

pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

pressing area: 2500mm x 1250mm; opening: 360mm; heating plate top: elektric; heating plate bottom: defective; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press. ThermoformingPreheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counter ...

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;

Pressing area: 3000 mm x 1800 mm; Number of manual hydraulic cylinders vertical: 4; Number of manual hydraulic cylinders horizontal: 2; Press pressure: 1500 kg; Machine length: 4000 mm; Machine width: 750 mm; Machine height: 2250 mm; Chassis on wheels, two of which are steeredManual hydraulic cylinders height-adjustableVertical sliding posts

pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;

Press length: 3000mm; Crimping depth: Pressing elements vertical: 6; Horizontal press elements: Pressure build-up: pneumatic; Press pressure: per cylinder; Cylinder stroke: mm; Hold-down: no; Machine length: 2700mm; Machine width: 1000mm; Machine height: 1400mm; Weight: