other wood working machines used for sale (1,413)

Manufacturer: Riepe Model: Polisher Year of Manufacture: 2015 Electrical Data - Voltage: 380 V / 50 Hz - Dimensions and Weight - Dimensions (L x W x H): approx. 1013 x 1104 x 1070 mm - Weight: approx. 190 kg Technical Specifications - Through-feed edge polishing machine for high-gloss finish - Transport via roller conveyor - 3 polishing discs arranged at 45 degrees: 1. Hard wax application (first disc) 2. Removal of excess wax 3. High-gloss finish - Manual wax feed (hard wax stick) - Height adjustment for different workpiece sizes - Each polishing disc individually adjustable horizontally and vertically - Quick-change polishing discs Find more here - / Contact us at -

Panel saw Type: WA 8 Manufacturer: Altendorf Year: 2016 Length of the table: 3200 mm Max. saw blade diameter: 400 mm Cutting height: up to 120 mm (depending on the disc) Disc tilt: 0–45° Motor: 5.5 kW (400 V) Pre-cut (pre-cut unit) Aluminum trolley with precise guidance Parallel ruler Angle ruler with stops Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Haas Model: HSZ-R 500 x 1800 Year of Manufacture: 2008 Type of Machine : Wet Hammer Mil Condition : Used Technical Specifications - Rotor diameter: 1300 mm - Machine inlet width: 1800 mm - Screen perforation (as delivered): 16 mm diameter - Number of hammer tools (full complement): 440 pieces - Grinding bars zone 1 (Mahlleisten Ml.1): 54 pieces - Grinding bars zone 2 (Mahlleisten Ml.2): 42 pieces - Total machine weight (including motor): approx. 12,350 kg - Feed trough weight: approx. 1,100 kg - Sound power level (at full load, 5 m distance): 90 dB(A) - Hydraulic unit (hood opening system): 1.5 kW, 230/400 V, 50 Hz Overall Dimensions - Length: 4790 mm - Width: 2700 mm - Height: 4145 mm Find more here - / Contact us at -

circular angle saw for cutting logs Type: D9 Duplex+LH8 Manufacturer: StrojCad Year: 2018 Hours: 10000 mth Logs max: 800 mm Max log length: 8000 mm Saw blade width: 500 mm Max. lumber size: 180/180 mm, in the mode of wide boards 310/180 mm 2x discharge conveyors 1x loading conveyor 1x sorting tipping conveyor Automatic sorting of cuts Machine weight: 19500 kg Centralized lubrication system, dispenser, cabin Machine in good condition, fully functional, under power Find more here - / Contact us at -

Dimensions (L/W/H): 2070x800x2500 mmWeight: 450 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2570x1100x2490 mmWeight: 400 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x800x2500 mmWeight: 400 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 100 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Type: EDGETEQ S-300 Manufacturer: Homag Year: 2020 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Cutting center Type: Cut 6120 Manufacturer: Holz-Her Year: 2010 Control: HOLZHER CUTCONTROL 2 Cutting length: 4400 mm Max overhang of the saw blade:82 mm Main motor: 11 kW (for discs Ø 350 mm) Independent pre-cutting motor: 2.2 kW Feed speed: continuously adjustable up to 100 m/min Dimensions: 9730 x 6450 x 1650 mm Integrated label printer Air cushion tables for easy handling of heavy plates Machine in good condition, fully functional Find more here - / Contact us at -

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -

Manufacturer: Italpresse Model: BG/660 Year of Manufacture: 2002 Technical Specifications - Control Voltage: 220 V - Operating Voltage: 400 V - Frequency: 50 Hz - Phases: 3+MP+PE - Maximum Power: 108 kW - Maximum Current: 160 A - Cable Cross-Section (Supply): 70 mm2 - Static Load Capacity: 27,500 daN - Dynamic Load Capacity (with tooling): 36,000 daN Find more here - / Contact us at -

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

length: ca. 3.200 mmwidth: ca. 1.400 mmheight: ca, 1.600 mmMotors: 2 table - swivable: Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories.Roller table: yesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: 100 mmMotor output: 0,55 kWAir consumption: 1150 m³/hDimensions (L/W/H): 880 x 520 x 1640 mmWeight: kg: m³/h: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: 100 mmMotor output: 1,1 kWAir consumption: 720 m³/hDimensions (L/W/H): 1150 x 515 x 1640 mmWeight: 82 kg: m³/h: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: 160 mmMotor output: 1,5 kWDimensions (L/W/H): 1.220 x 650 x 3.270 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Type: Tempora 45,03L Manufacturer: Format-4 Year: 2023 Installation length: 4230 mm Thickness of edging material: 0.4–3 mm Workpiece thickness: 8-45 mm Control unit smar-touch 10.4" Roving unit up to a height of 45 mm Application unit for processing EVA and PUR adhesives and easy-clean unit Machine in very good condition, under power Find more here - / Contact us at -

Panel saw Type: K 740 S Manufacturer: Felder Year: 2023 Cutting length: 2500 -3700 mm Formatting sliding table "X-ROLL" Cutting width: 800 – 1250 mm Cutting height: 140 mm Control unit: "Power-Drive" Machine in very good condition, under power Find more here - / Contact us at -

total power requirement: 31,7 kWmain drive: 7,5 kWInput width: 550 mm: ca. 25/75 mmventilator: 22kW / 10.800 m³/h Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes.The system consists of two infeed conveyor belts, the chipper and a transport fan.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Type: KDF 440 Manufacturer: Brandt Year: 2013 In production: 2014 Adjustable ruler at the input Pre-milling unit 2 x 2.2 kW with DIA tools height 60 mm Edging unit A3 Cutting unit 2 x pneumatically controlled Milling unit 2 x R-2 mm End milling unit (corner cutter) 2 x 0.4 kW automatically controlledControl panel Spraying of LPZ/II® separating agent before the pre-milling unit, prevents adhesive from sticking to the surface of the part Pre-milling 2 x 2.2 kW Edging unit Cutting unit diagonally/perpendicularly 2 x 0.35 kW Profile milling unit 2 x 0.55 kW Shaped milling. end mill (corner mill) 2 x 0.4 kW Quickly replaceable profile sanders Flat sanders LP163/93® cleaning agent spray before polishing discs Polishing discs 2x edge banding unit - 1x transparent + 1 white Edge thickness 0.4 – 3 mm Thickness of edge banded material 8 – 60 mm Fe ...

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Find more here - / Contact us at -

Cutting center Type: TS 90 Manufacturer: Macmazza Year: 2019 Cutting length: 4300 mm Effective Cutting Height: 72 mm Motor power: 10 – 20 hp Main blade diameter: 220–325 mm Weight: 3500 Kg Dust extraction hood diameter: 2×120 mm 2×100 mm Saw carriage advance speed: 3-50 m/min Saw carriage return speed: 30-120 m/min Pusher speed: 2-25 m/min Pusher return speed: 25-70 m/min Suctions: 4000 m³/h 2500 N/m² Label printer Machine in good condition, under power Find more here - / Contact us at -

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Pre-milling machine Radius Rondomat Radius cidliny Scrapers Machine in good condition, under power Find more here - / Contact us at -