other wood working machines used for sale (1,357)

Don't bake, tubes are not with you, only engine Auction-ID: A3-46147-2408

Manufacturer: Wemhoener Model: DEK 06 Type of Machine: Single-Level Short-Cycle Press Year of Manufacture: 2001 Condition: Good condition, still produces occasionally Press Counter: currently 13.65 million pressings Technical Specifications: - Heating plate format: 5,700 x 2,300 mm - Plate format capacity: 5,600 x 2,220 mm - Total press pressure: 49,728 kN - Specific press pressure: 400 N per square centimetre - Working pressure: 320 bar - Maximum operating temperature: 220 degrees Celsius - Required drive power: 63 kW - Operating voltage: 400 V, 50 Hz - Tank filling: 2,000 / 4,000 litres - Pump type: 2xA2F032/61L-P6H4-2x/050R - Secondary heating medium: thermal oil - Electrical control: Siemens S7/400 PLC Output and Capacity: - Minimum cycle time: 20 seconds, equal to 180 cycles per hour in single-format setup - Minimum cycle time: 25 seconds, equal to 144 cycles per hour in do ...

Pallet niet inbegrepen. Werkend uit bedrijf genomen Auction-ID: A1-49060-183

: 160 mm: 1.500 m³/h: 2.800 pa: automatisch - mechanisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-49302-101

plate thickness: 4 mmblade length: 150 mmcutting angle: 30-120 °Table dimensions: 1000x650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2020 Giardiana DUAL TECH 420 SBC DRY Overall dimensions - Width: 4850 mm - Length: 4930 mm - Max height: 2845 mm - Working height: 900 mm (+/- 50) Workpiece capacity - Width: 100–1300 mm - Length: 100–2800 mm - Max thickness: 50 mm Electrical - Voltage: 400 V - Motor protection: ATEX3G + PTC - Total power: 14.5 kW Paper belt conveyor - Speed: 1–3 m/min - Gearbox: S301P 1:8.9 P.71 B3 - Motor: 0.37 kW Infeed conveyor - Speed: 2–6 m/min - Gearbox: VF44FA1100 P63 B5 B3 - Motor: 0.18 kW Central conveyor - Speed: 1.5–4.5 m/min - Gearbox: C323P 1/136 P71 B3 - Motor: 0.37 kW Outfeed conveyor - Speed: 2–6 m/min - Gearbox: VF 44 P 100 P63 B5 B8 - Motor: 0.18 kW Spray guns - Quantity: 4 - Model: TT1301 MACH5 UG.09-154 FILTERMEDIA Spray gun drive system - Gearbox: C322P 7.2 SK110B B7 - Motor: brushless - Gun travel speed: 0–120 m/min Air supply unit - Intake air flo ...

0: 160 mm0: 1680 m³/h0: 500 paDimensions (L/W/H): 2.450 x 1.000 x 750-1.050 mmweight: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: , mm0: 3100 m³/h0: , paThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kgGripping range: bis 400 mmSuspension: 250 mmweight: . kgweight max.: 3 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: . kgGripping range: . mmSuspension: . 0weight: . kgweight max.: . tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 700 mmSuspension: . 0weight: 60 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 1050-1200 mmSuspension: . 0weight: 180 kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kgGripping range: bis 400 mmSuspension: 250 mmweight: . kgweight max.: 3 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 550-650 mmSuspension: . 0weight: . kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgGripping range: 750-900 mmSuspension: . 0weight: . kgweight max.: 2 tclamping width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between centres: 1200 mmSpeed: A) 70 - 380 U/min.turning speeds: B) 380 - 2000 U/minweight: 2,2 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw Type: K 975 Manufacturer: Felder Year: 2008 Table length: 2500 mm Electric lift and tilt Pneumatic pressure Pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Schelling Year of manufacture: 2002 Model: FM-H 430/410 Type of machine: Panel Saw Voltage: 400 V, 50 Hz Current: 60 A Power: 27 KW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: HOMAG Year of manufacture: 2008 Model: PROFI BAZ 723/58/16/V/AP Type of machine: CNC Machining Center Voltage: 400 V, 50 Hz, 3 phase plus neutral Current: 90 A Control voltage: 24 V Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ANDERSON ANDI Model: NC-2616PT Type of machine: CNC machine Voltage: 380 V Frequency: 50 Hz, 3 phase Rated current: 80 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

MACHINE 1 - Panel saw - Manufacturer/Type: Homag HPV 11 - Model: HPV11/X/43/22 - Year of manufacture: 1999 - Made in Germany - Equipment: 3 stockyards with 25 panels each, panel dimension max 2,100 x 4,100 mm, up to 6 panels can be cut simultaneously, automatically height-adjustable clearing table - Special features: cut layout optimisation for optimal utilisation of panel material, low waste - Electrical: 400 V, 50 Hz, 3 phase + N, 80 A, 80 A fuse, 24 V control voltage - Length: 26 m - Width: 8.5 m - Height: 2.5 m - Equipped with lifting tables and Liftomat MACHINE 2 - Edge banding machine - Manufacturer/Type: Homag Optimat KL 78/A20 - Model: KL 78/A20/S2 - Year of manufacture: 1999 - Made in Germany - Equipment: panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade - Function: edge banding, one-sided - Work piece dimensions - length: min 120 ...

UNIT 1 - Weeke Profiline ABL 210 - Manufacturer: Weeke - Model/Type: Profiline ABL 210 - Year of manufacture: 2007 - Made in Germany - Power: 17 KW - Voltage: 400 V - Frequency: 50 Hz, 3 phase + N - Current: 35 A - Control voltage: 24 V UNIT 2 - Ligmatech MDE 110 loading system - Manufacturer: Ligmatech - Model/Type: MDE 110/28/08 - Year of manufacture: 2007 - Made in Germany - Voltage: 400 V - Frequency: 50 Hz, 3 phase + N - Current: 12 A - Fuse: 25 A - Control voltage: 24 V - Max pressure: 10 bar - Air consumption: 8 Nm3/h - Weight: 6500 kg UNIT 3 - Ligmatech control system - Manufacturer: Ligmatech - Model/Type: Steuerung - Year of manufacture: 2007 - Made in Germany - Voltage: 400 V - Frequency: 50 Hz, 3 phase + N - Current: 8 A - Fuse: 16 A - Control voltage: 24 V Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Homag Model: HQP Type of machine: Crosscut saw with deep-cut saw Year of manufacture: 2011 Condition: Used, excellent condition, very well preserved and carefully maintained, ready for use Status: Disassembled and ready for immediate loading Cutting length: 1600 mm Program slide travel: 5600 mm Number of collets: 4 Maximum feed rate: 150 m/min Saw blade projection: 125 mm Main motor: 13.5 kW Scoring unit: Yes Storage sheet length: 10 m Storage sheet width: 5 m Accessories: Includes a small Bargstedt storage unit for conveniently placing worktops during transport Find more here - .ucymachines/ Contact us at - sales@ucymachines

Optimization saw Type: Opticut S 90 Manufacturer: Dimter Year: 2007 Hours: 582 Automatic miter saw Radial saw Reciprocating saw Cross-cut saw Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Muhlbock Year of manufacture: 2019 Type: ZLSM3150-3120-1072-11-1306-6,0 Type of machine: Wood drying chamber (kiln) for timber drying Internal length: 2 x 5.00 meters plus 0.72 meters Stack depth: 3 x 1.50 meters plus 2 x 0.10 meters Stack height: 3 x 1.20 meters plus 3 x 0.10 meters plus 0.30 meters Gross stack volume capacity: 162 cubic meters Loading method: Loaded by forklift through an electrically operated lift-folding door with an integrated walk-in door Output quality: The system is designed to maintain the specified wood drying quality while minimizing drying time and cost, according to the manufacturers K5 drying management program Heating capacity: 780 kW, including 858 kW with heat recovery Supply temperature: 95 degrees Celsius Water flow rate: 45 cubic meters per hour Pressure loss: 3.0 mWS / 0.3 bar Supply and return connections: DN 100, PN 10  ...

Manufacturer: SCM Model: Morbidelli M100 Type of Machine: CNC Machining Centre for Furniture and Panel Processing Year of Manufacture: 2019 Condition: Excellent, very little use Operating Hours: Approximately 2,000 hours Working Area and Panel Capacity: - Useful working field X axis: 3,110 mm - Useful working field Y axis: 1,620 mm - Panel passage on Y: 1,900 mm - Panel passage on Z: 180 mm - Length of piece in pendulum working mode: 1,400 mm - Machining Capability: Machining in 3, 4 and 5 axes; drilling, routing/milling, grooving and - panel processing - Main Software: Maestro CNC integrated CAD-CAM software - Operating System: Windows 7 - Main Display: 21.5 inch LCD, 16:9, Full HD Axis Speeds: - Maximum vector speed on X-Y (PRO-SPACE version): 56 m/min - Maximum vector speed on X-Y (PRO-SPEED version): 78 m/min Drilling and Grooving Group F23L: - Vertical independent spindle ...

Manufacturer: SCM Type of Machine: Sliding Table Saw / Circular Saw for Panel Sizing Model:Class SI 400 EP Year of Manufacture: 2019 Technical Specifications: - Maximum cutting height at 90 degrees: 140 mm (with 400 mm blade) - Maximum cutting height at 45 degrees: 97 mm (with 400 mm blade) - Main saw blade diameter: 400 mm - Scoring blade diameter: 120 mm - Saw blade tilt: 45 degrees - Main saw blade speed: 3,000 / 4,000 / 5,000 rpm - Scoring blade speed: 8,500 rpm - Main motor power: 7 kW / 9.5 HP - Scoring motor power: 1.3 kW / 1.7 HP - Sliding carriage dimensions: 3,200 x 320 mm - Parallel fence cutting width: 1,270 mm - Suction outlet diameter (blade guard): 120 mm - Suction outlet diameter (machine base): 100 mm Control System (EASY 3 UP PLUS CE Version): EASY2 electronic control with 7-inch 16:9 monitor; suspended, orientable control panel; programmed display and control of ...