other wood working machines used for sale (1,414)

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

Length Sorting Plant Sawn Timber Sorting Plant MAYRHOFER 5-Boxes Total length: approx. 22 meters Current: 1. Box: 1 meter 2nd box: 1.5 meters 3. Box: 2 meters 4. Box: 2.5 meters 5. Box: 3 meters good condition - fully functional - can still be viewed during operation Location: Austria, near Graz

Hacker TH 250/650 with metal detector, sieve..

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Hydraulic wood splitter, functional Details on request

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

Roundwood feeder with separation 4-strand

Full gate Esterer SS45 was generalueberholt Pass 450 mm 340 upm 500 Hub with complete hanging, saegen blaetters and Templates with hydraulic roller lifting with wedge wedge with drive power 30 kW with hydraulic unit with complete control cabinet

Roundwood feeder 4-stranded with depositor Möhringer Dimensions: Round wood cover 6.00 meters long, 6.00 meters wide Insert 6.00 meters long, 1.50 meters wide the system is 4-strand edter with electric motors and hydraulic unit

Rind mill

R&E Conveyor No 2618 Y.O.M. 1998 Width 2x 650 Length 16 m Curved, head approx. 6 m Good condition!

Technical data Ruwac WS 2220 m Suction: 2,400 Watts Air capacity: 290 m3/h Voltage: 230 Volt Vacuum: 210 mbar Filter surface bag filter: 1.2 or 2.6 m2 Tank capacity: 35 litres Residual dust filters: 3.2 m2 Sound pressure level: 67 dB(A) Inlet: 50 mm

Conveyor for peace\'s length 6 m+ 3 m high

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV..

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Drum crusher with hydraulic pusherKnife drum width: 800 mmMouth 800 x 1200 mmMotor: 18,5 kWextraction connection diameter 200 mm

Single sided edge bander with hot melt, fixed side at the right, pre-milling unitEdge thickness: 0,4 to 12 mmWorkpiece thickness: 8 - 60 mmFeedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)Workpiece transport by chain, top pressures with rubber rollersSound enclosure over all trimming motorsEquipment:Adjustable fencePre-milling with 2 shapers, each 2,2 kWCoil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollersEnd trims, 2 x 0,35 kW motors, straight and chamfer 15?Top/bottom trimming, motors 2 x 0,35 kWRadius trimmmingContour trimming unit, leading and following edge, 2 x 0,35 kWRadius scraping unitGlue scrapersBuffing unitControlls PC 20+

Panel thickness: 8 - 50 mmThickness of the edges: 0,4- 3 mmFeed speed 8 - 11 m / minPU pressure rollersEquipment:Squaring unit, 2 motors 2,2 kWPanel edge heatingEdge magazine for coil and stripsHot melt application with rollerAirtec AT4510 unitThe Airtec aggregate is positioned so you can use Airtec or the standard glue potMotorized side pressure unitEnd trims, 2 motors, pneumatic positioning straight and with chamfertrimming unit above / belowContour trimming unitProfile scraping unitGlue scraping unitPolishing unitDetergent spray systemcentral lubrication

Workpiece thickness: 8 - 50 mmEdge thickness: Coil edges 0.4 - 3 mmFeed speed 10 m/minEquipment:manual height adjustment.Joint milling unit, 2 motors Panel edge heatingGluing area Pressure zone 1 driven and 2 non-driven rollersEnd trims, 2 x 0,8 kW motors, straight and chamfer 15?Top and bottom trimmingProfile scraping unit for PVC edgingGlue scrapers

4-side squaring and edge banding lineMachine 1:Fixed side right, moving side leftRolling chain, feed 10 - 40 m/minControlls NC 21Panel thickness 8 - 60 mmMax. panel width 1500 mmEdges: coil 0,3 - 3 mm, strips 0,4 - 20 mmEntry fence for veneered panelsEquipment:1+1 Compact-twin hogger, 2 motors 6,6 kW1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application1+1 Free space for solid wood edges up to 2,54 m length1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm)1+1 Universal shaper 8,1 kW1+1 Universal shaper 8,1 kW1+1 Edge sander KS 101+1 Disc sander DS 401+1 Disc sander DS 40Angular transfer to the right, TWR 24/30/12/SPanel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mmMachine 2Machine II + infeed magazine TW 24Fixed side right, m ...

Semi-automatic

Max working width: 1300mmMax working thickness: 140mmMax. machining width: 1300mmMotorized feed rollers2 brushing units

Working area: X 5005 x Y 1520 mm x Z 200 mmMain spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm.Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min8 workpiece consoles with automatically positioning vacuum cupsEquipment:Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting sawMilling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlledTool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacityPC controlMasterwork software Integrated waste conveyor