other machines and plants used for sale (14,781)

Stainless Steel Elevator

Elevator

Model: KXS7522AVCLE For technical data, see photo. System has few operating hours as it is only used for comparison tests. Subject to prior sale - errors possible! Internal reference number: D-1192

approx. 4 pieces h.a.l.m. Solar Cell Measuring System, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device – used -: Price per piece from location: 8.350.-€ (net) Complete device IV measuring system Manufacturer: H.A.L.M. Type: cetisPV Consisting of: CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete Unit Year of manufacture: unknown Condition: good Available: immediately Location: Frankenberg camp / Saxony

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Tank capacity 1 m³ Year of manufacture 1991 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent, we ...

SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

1 Karlsruhe cooling tower system with 2 fans Type: KD 2/12 - 34-3 Fabr. No. 7522, power 2,232 KV with complete frame with complete rust removal Shut down End3e 2023, completely on site on the production roof,

Motor 5.5 kW/380 V/50 Hz, 2920 rpm, pipe connection D=250 mm

The Progress Rotary Judge is equipped as follows -5 rotors with directional nozzles 8-16mm D. wire -1 rotor with straightening rollers for 20mm D. wire. - Straightening extension 14m. with row of hooks. -6 pieces of driven reels 5 to. at call

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 21 Max. current (A) 36 Starting Current Circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401313 Year of construction 2023 Condition: Optical 2, Technically ok used (Technical changes and prior sale res ...

Qty. 1 Second-hand Aluminium Melting Furnace Mfc.: Sistem Teknik Type: SAMHF-6 Stationary Alu melting/holding furnace Built: 1/2015 Stopped in 4/2015 Recycling capacity: 5000 Ton/annum Charging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc. Natural gas 6 ton melting furnace Made in Europe CE standard of quality and pollution control Casting capacity of 20 ton of aluminium per day PLC automatic control unit including HMI system – Siemens Qty. 2 proportional control gas burners

Stand height approx. 5000mm Longitudinal beam approx. 6000mm Load capacity 125 kg Working dimensions see pictures

Qty. 1 Second-hand Dedusting and air filtration system – currently used for an aluminium foundry – can be used for other applications Mfc.: NEOTECHNIK Gmbh (Germany) Built: 2006, Modernised: 2015 Currently used in an aluminium foundry, can be used for other applications Consisting of: 1. Main filter, chamber 1 2. Main filter, chamber 2 3. Main air fan for cooling, Reitz Germany, 1 4. Main air fan for cooling, Reitz Germany, 2 5. Installation for limescale dosing and dust separation 1 6. Installation for limescale dosing and dust separation 2 7. Cyclone 1 8. Cyclone 2 9. Silo for limescale 10. Dust collecting unit 1 11. Dust collecting unit 2 12. Auxiliary equipment, such as piping, valves, ducts, fans, additional filters, etc.

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

1 Melting Furnace Mfc.: De Winter Built: 2014 Type: 2 Chambers furnace Capacity: 75 Ton – 6.5 t/h

Laser cutting machine from our exhibition with 150 watts of laser power Delivery time: immediately available ----- Turn it on and get started ----- ----- machine with only about 50 operating hours ----- ----- Year of construction: March 2022 ----- professional machine ----- - incl. Windows10 PC system / monitor / keyboard / mouse - Manufactures installed cutting and engraving software in German - Coordinated and immediately ready for use - Machine masters very fine engraving as well as precise cutting of thick wood or acrylic glass. - very versatile cutting machine. - Cutting wood up to 20mm thick - Cutting of arcyl glass and many other plastics - cutting fabrics, plastic fleeces, etc. - Cutting rubber mats - Engraving on wood, concrete, stone, many plastics - Production of stamps - Heavy industrial quality - Travel 1300 x 900mm - Drives with hybrid  ...

Refrigeration dryer Manufacturer: KAESER Type: TE 121 Year of Make: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser.

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine  ...

Ø 65 - 3000mm Dimensions: 1700x5300mm Connected to this machine: Gildemeister Twin 65

Ø 65 - 3000mm Dimensions: 900x4200mm Connected to this machine: Gildemeister Twin 65

Ink-Jet Printer Manufacturer : Citronix Type: CI 1000 Technical specifications : Line: 31 dot-5 line IP proteciton: Nema 4 (IP 55) Self-cleaning Documents: available

Ink-Jet Printer Manufacturer : Citronix Type: CI 700 Technical specifications : line: 25 dot-3 line IP proteciton: Nema 4 (IP 55) Self-cleaning Documents: available

Inkjet printer Manufacturer EBS Type EBS 6000