other machines and plants used for sale (14,781)

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

1 needle flatbed quilting machine

Single Needle Double Lockstitch Flatbed Machine

1-needle double lockstitch quick sewer

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

Wide-chamber pin mill with grey cast iron housing, output / throughput: 600 kg/h max. (depending on material), required motor power: 12 kW to 22 kW (optional). Rotor and stator disc in very good condition. Cleaned, anti-rust primed and repainted. Rust protection inside can be easily removed before commissioning.

Round feeder for dosing difficult-to-flow materials, container dimensions: approx. 1,250 mm Ø x 1,500 mm high (= approx. 1,700 l. useful filling). Discharge via 4-arm ground agitator with wall scrapers and adjustable slide / weir. Drive via SEW geared motor with 11 kW. Most recently used in ceramics production between intensive mixer and extrusion press.

1-needle flat quilting machine, upper and lower wheel transport

Single Needle Double Lockstitch Flat Sewing Machine with Underfeed

Batch ball mill made in Germany with a gross volume of 400 l., drive via V-belt and gear motor with 2.2 kW, iron-free lining (aluminium oxide), previous use: glaze production in the wet grinding process. Cleaned, repainted and restored. Available for an extra charge: iron-free grinding media (balls, alubit).

Single-swing jaw crusher with an internal width of 500 mm x 350 mm. The lower gap is adjustable from approx. 30 to 80 mm. Throughput (depending on the selected gap width and the material to be crushed): Between 9 and 30 tons/h. The crusher ran smoothly until the removal and the scope of delivery includes 2 suitable, unused crushing jaws. Additional spare parts / wear parts are available for an extra charge.

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

feed pressure: . barliter capacity: . ltotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mPump aggregate The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m

Cutting and straightening system Reinforcing steel processing Manufacturer: PROGRESS 2 bending units for the production of brackets. Making straight iron to length. Or straight irons with hangers. Roller conveyor 14 m Hydraulic shears up to 9 m Computer-controlled Software latest version 2019 Good condition. Export/price net ex location S-Anhalt 18,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 62 ...

VITO XS Vacuum Filtration System VITO X is best suited for restaurants, bakeries or establishments with a high frying volume. The VITO XS cleans the frying oil, holds it in its 40 l tank and offers easy, hygienic transport in the kitchen. Thanks to its unique vacuum filtration, the particles remain in the filter when dry. Like every VITO frying oil filter, the XS also offers a fine filtration of 5μm and thus the optimal quality of your oil is maintained. The unique design ensures that it also works at temperatures of 200°C, but at the same time offers the highest level of occupational safety. After filtration, the oil can simply be pumped back again. Advantages: Great savings potential Optimal quality Less work Filtration capacity: up to 30 L/min Filtration: up to 5μm Material: Stainless steel 1.4301 Weight: 45 kg Max. oil temperature: 200°C Tank capacity: 40 L El ...

Battery-powered high-performance sweeper/scrubber dryer Scrub and sweep in one go: with the M17 battery-powered ride-on scouring vacuum cleaner from Tennant® Scrubbing and sweeping in one pass – and chemical-free: thanks to ec-H2O™ technology in the battery-powered Tennant® M17 ride-on scouring vacuum cleaner with scrubbing and sweeping function. Highly efficient floor cleaning is ensured by double side sweeping brushes and automated high emptying, among other things. Chemical-free ec-H2O™ technology for environmental, health and cost awareness High indoor air quality thanks to 2-stage filter system with ShakeMax filter shaker Easy maintenance with tool-free access to suction feet, brushes and filters Double side sweeping brushes for longer cleaning path and protection of the suction cup Intuitive operation via touch-n-go™ controls Automated high emptying for debris  ...

CYGNUS TECH CY 301 PT1 Compact chiller designed for outdoor installation -10°C - + 46°C suction temperature. Including crank tray heating, buffer tank and built-in P1 circulation pump Cooling capacity kW 69 Cold water temperature outlet/inlet: 7 / 12°C Volume flow m³/h 11.9 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 30.5 Max. Current (A) 51 Starting Current Circuit (A) 159 Protection class: IPX4

Specifications: Support surface table: Width x Depth x Max. Clamping Distance: 192 x 115 x 120 mm Height center cutting wheel above table: 520 mm Cutting disc height adjustment via Cylinder with measuring system: 445 mm Cutting Wheel Dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Workpiece dimensions max. length: Workpiece feeder: 3500 mm Workpiece discharge: 2000 mm Workpiece dimensions min. length: Workpiece feeder: 300 mm Workpiece discharge: 300 mm Workpiece feeder: Servo - controlled Measuring distance via measuring system: 3500 mm Circumferential speed: 25 - 60 m/sec Main motor: 10 kW Dimensions of separation system (WxDxH), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece feeder: 380 kg Workpiece discharge: 350 kg Control cabinet: 280 kg

Screw press, collection container, pre-tank

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:

Used machine, Woma Twinjet 550 Z - 250 M Working pressure: 550 Z, P35 1,300 bar-143 lpm, 250 m, P18 2,500 bar-31 lpm Year of construction 2014 Drive: electric 500 kW Operating hours: approx.: 1,305 h, 3 gun Control , and accessories

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Spout under the tank with flange Ø 4.5 cm Spout at the bottom Ø 6.5 cm, without tap Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485