other machines and plants used for sale (14,416)

Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...

Jaw Crushers Manufacturer: Retsch Type BB 100

For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the net ...

Two vacuum lifting devices from Hegla and Bystronic for the glass industry are available. 1) Hegla Isofix LN6-D90-250, year of manufacture: 2023, load capacity: 250kg, suction cups: 6. 2) Bystronic, load capacity: 350kg, suction cups: 4. Documentation available. An on-site inspection is possible.

An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

Engine: Klockner Humboldt Deutz F12L413F, power: 282kW, torque: 1227Nm, cylinders: 12, displacement: 19144cm³. Speed: 55km/h, wheels: 6, skip capacity painted/heaped: 15.3m³/21.1m³. Unladen weight: approx. 23000kg, payload: 32000kg, total weight: approx. 55000kg, machine dimensions X/Y/Z: approx. 7750mm/3650mm/3600mm, operating hours: 10990h. The tipper got new tires from Bridgestone in 2019. Documentation available. On-site inspection is possible.

used Spewe mineral wool cutter, universal guide unit for many Possible applications, including the following equipment: - Short-stroke parallelogram - Telescopic cut-out post - Insulation thickness preset - Rear saw blade forced guide - Cutting guide swivels from -5 to +45 degrees - Without guide slide - Without insulation saw Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Cutting length: 1270/1100 mm Cutting depth at 90 degrees: 80 - 305 mm Cutting depth at 45 degrees: 180 mm Machine weight: 24 kg

A test station for steering wheel testing is available. Workpiece: steering wheels, operating pressure: 6bar, test processes: ALDW/heating mat resistance/horn contact force measurement/horn contact travel measurement. Machine dimensions X/Y/Z: approx. 1600mm/1800mm/2200mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A Köhler salt spray chamber for corrosion testing of materials and components is available. Test chamber volume: 1000l, temperature constancy: +/-1K, water pressure range: 2.5bar-5bar, internal dimensions X/Y/Z: 1250mm/950mm/760mm, machine dimensions X/Y/Z: approx. 2100mm/1400mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Strip light scanner consisting of: 1 pc. control unit Art.-No. VL-500 1 pc. 500-mm base Item no. VL-550 1 pc. measuring head Art.-No. VL-570 1 pc. Accessories including calibration plate, user manuals item no. VL-A2D 1 pc. Cover Art.-Nr. VL-C2 1 Pc. Win10 PC for VL-500 Series Item No. 972337 1 pc. LCD monitor for VL 23-inch Art.-Nr. Reference 972072L 1 pc. Comparative measurement module Art.-No. VL-H2P 1 pc. Shape and Position Tolerance Module Art. No. VL-H2G 4 pcs. AC cable Art.-Nr. OP-99031

A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible.

A MAN truck including a rear-mounted loader crane Palfinger PK 7501 is available. Engine power: 184kW, displacement: 6871cm³, fuel: diesel, wheel and tire size: 265/70 R 19.5, crane type: hydraulic knuckle boom loader crane, max. lifting capacity: 5400kg, reach: 13800mm, max. inclination: 20°. Documentation available. An on-site inspection is possible.

A modular compact viscometer Anton Paar for rotational and oscillation measurements is available. Measuring plate: PP25, measuring plate diameter: 25mm, max. torque: 125mNm, min. torque: 0.4µNm, torque resolution: 100nNm, max. speed: 1500rpm, sample temperature min./max.: -20°C/220°C, temperature control unit: P-PTD 220, max. measuring cell pressure: 150bar. Machine dimensions X/Y/Z: approx. 400mm/700mm/550mm, weight: approx. 35kg, control system: RheoCompass Light. Documentation available. An on-site inspection is possible.

The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...

Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation

Laboratory ball mill with 2 independent grinding devices (each with 0.25 kW drive) for fine grinding down to less than 10 microns. Incl. control box with timers, grinding balls (Alubit) and 1 ceramic grinding bowl.

A flexible CNC filling system Rationator for liquid filling is available. Dosing principle: volumetric piston dosing, filling positions: 10, design: 2-phase filling, products: liquids/lotions/emulsions/cosmetic products/chemicals, filling range: 20ml-1000ml, total system length: approx. 7800mm, total system height: approx. 1650mm. Including conveyor belt and transfer station. Documentation available. An on-site inspection is possible. Expected to be available starting mid-June 2026.

A remote-controlled heavy-duty vehicle is available. Length: 14m, width: 2.4m, payload: 20t, loading length: 11.5m, heavy-duty lifting tables: 2, drive: Lombardini diesel. Documentation available. An on-site inspection is possible.

An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible.

We offer for sale a powerful split air conditioner with 6.7 kW cooling capacity, which is ideal for air conditioning offices, server or sales rooms. The device is in perfect technical condition, as it has always been professionally maintained through very short maintenance intervals. A viewing is possible at short notice by arrangement; a proper invoice with VAT will be issued.

For sale is an air-cooled chiller. The regulated water pump and the controlled fan make it particularly efficient. It has an integrated plate heat exchanger, an expansion tank, very quiet fans made of composite materials, and compressors mounted on vibration dampers. Partial load operation with 33% and 66% enables energy-efficient operation. The Touch Pilot control with 4.3" colour display offers a wide range of individual setting options such as time settings or night mode. Dimensions: LxWxH 2340 x 2320 x 1530 mm, weight 1,020 kg

Offer an ideal paper cutting machine here

Formwork tables/pallets Various formwork tables in different lengths Built in 1995 Very clean condition Location Göttingen Price: Freely loaded p. piece 3,000,-- euros + Added value. I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Tilting device for concrete switching tables Manufacturer: FIBO Built in 1995 Drive: Electro-hydraulic Optional: Sliding device And switching tables.

CNC controlled cutting table for flat glass sheets 6000 x 3210 mm. With topiary and model catalogue. The glass panels are placed on top by means of swivelling arms. Power consumption 20 kW, dimensions 9200 x 4500 mm

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

Load capacity: 80kg, horizontal/vertical reach: 2100mm/3300mm, repeatability: +/-0.07mm, weight: approx. 540kg. Documentation available. An on-site inspection is possible.