other machines and plants used for sale (14,416)

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

drawbar, drawbar eye, drawbar eye, for truck trailers -Length: 395 mm -Width: 50 mm -Height: 40 mm -Eye: Ø 43 mm -Price: per piece -Quantity: 72 pieces -Dimensions: 395/101/H40 mm -Weight: 5.5 kg

Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

M2 cusing multilaser, 2 lasers à 400 watts CL1 Machining area: 250 x 250 x 350 mm (x, y, z) incl. incl. extension of the dosing chamber axis CL2 machining area: 250 x 250 x 250 mm (x, y, z) CL1 Operating hours : 6.176 h CL 2 Operating hours : 4,131 h Wet Separator NA7-11 CL Screening station incl. pallet trucks Blow-out station Powder container (8 pcs) Various accessories and spare parts (installation panels, seals, filters, rubber lips,) Machines can also be sold individually.

A Stiegler side weld bag-making machine in need of repair is available. Working width: 1000mm, film material: PE/PP, feed range: 80mm-600mm, max. clearance: 900mm, film width range: 200mm-1380mm, film thickness range: 0.025mm-0.085mm, output: 160cycles/min, max. C-fold triangle: 1380mm. Including bottom gusset device, hot stamping units, thermal transfer units, ribbon unwinding unit, unwinding station and various accessories. The control system of the line must be renewed. Documentation available. An on-site inspection is possible.

Elma XTRAST Elmasonic 9738 Ultrasonic cleaning device In a very good condition!

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible.

Object: Rayjet Laser 30W/230/50/AA Manufacturer: Trotec Laser Deutschland GmbH Technical data: • 30 watts • 230 volts • 50 / 60 Hertz • Rulers in mm • With Slash • Standard plug Accessories: • Atmos Cube Rayjet 230 V • Suction connection cable beige 9po • Cutting table MM and inch 8015 • Power cord 20A • Wooden packaging Year of Make: 2021 Price: We ask for your binding offer Release date: 05/04/2026 Terms of delivery: ex site – EXW Wismar Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Silo plant with a total gross capacity of 90 m³, consisting of 3 steel round silos of 30 m³ each. Usable volume per silo: 25 m³, diameter: 3,500 mm, total height: 5,850 mm, cylindrical height: 2,150 mm, cone height: 2,735 mm, cone inclination: 62.2°, outlet height: 965 mm, outlet cross-section: DN 250 mm. Silos have always been under roof and can be viewed in their assembled condition.

One DEK stencil printer including two identical ASYS unloaders is available. 1) DAK Horizon 03ix stencil printer, year of manufacture: 2011, print dimensions X/Y: 510mm/508.5mm, min. PCB dimensions X/Y: 50mm/40.5mm, PCB thickness: 0.2mm-6mm, max. PCB weight: 1kg, print speed: 300mm/s, stencil frame size: 305mm-736mm, machine dimensions approx. 2100mm/1500mm/1600mm, weight: approx. 700kg. 2) 2x SMT magazine unloaders ASYS AMS 03D type 3.1, year of manufacture: 2019/2022. Including three timing belts 16T5-3835. Documentation available. An on-site inspection is possible.

cold gluer Ropi FK 3500 Year: 2010 Format / Working width: 60 x 170 mm / 450 x 450mm Technical specification machine suitable for small and very small products medium or small runs Paper/carton weight: 150 ? 450 g / m2 Type of adhesive/glue: commercially available dispersion glue Glue unit: pneumatic controlled gluing unit with 2 gluing heads Speed-dial controlled Feeder: suction belt feeder Speed: max. 10,000 products / h

Dixi 50 S ? Vertical Baler Year: 2004 General: Type: Vertical baler for paper, cardboard, foil, PET, textiles, and other recyclable materials Pressing force: 50 t Drive: 7.5 kW electric motor, 400 V / 50 Hz Control: Microprocessor-controlled with programmable settings Bale Performance: Cycle time: ~41 seconds Press time: ~23 seconds Bale size (L × W × H): 120 × 80 × 80?110 cm Bale weight: 350?500 kg (depending on material) Feeding opening: 1200 × 670 mm Dimensions &, Weight: Machine size (L × W × H): 1600 × 1300 × 3100 mm Transport height (lowered): 2240 mm Approximate weight: 2,050?2,180 kg Operation &, Features: Manual bale strapping Automatic start when feed door closes Hydraulic ram return and full bale ejection Adjustable press time and bale size Optional extras: dust-extraction connection, hydraulic door opener Type: Vertical baler for paper, cardboard, foil, PET, te ...

Year approx 1992 size 50x70

1 x Perforating tool 1 x Creasing tool width 80cm

Kallfass Universa 8060 Spezial (1999) Type: Automatic L-sealer / shrink wrapping machine Format Max. product size: approx. 800 × 600 mm Max. height: approx. 200 ? 250 mm (depending on setup) Material Film type: polyolefin (PO), polyethylene (PE), PVC shrink film Film width: up to approx. 800 mm Performance Output: up to ~25?35 cycles/min (depending on product &, operator) Machine Data Year: 1999 Power supply: 400 V / 3-phase / 50 Hz Compressed air: required Machine type: semi-automatic or automatic (depending on configuration) Equipment / Features automatic or manual infeed (configuration dependent) L-sealing frame (angle sealer) integrated or inline shrink tunnel (optional/combined line) adjustable sealing time and temperature conveyor belt system film roll holder with easy loading electronic control panel safety guards and emergency stop quick format changeover suitable for single  ...

Width: 100 cm Motor operated Core shaft Round knife hand operated On wheels

Brehmer Polygraph 703/1 Staple thickness up to 25mm Round wire No. 23-30 Staple spine length 12mm Stapling speed 155-215 staples/min. Electrical connection 400V/50Hz Weight 200kg

1.) Sumbel Herold 2.)Zechini Ottima 74 Roller press Year 2000 Size 74cm Roller pressing unit to press together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max material thickness: 3,5 mm. Dimensions: 96 x 85x 105h cm Net weight: 119 kg 3.) Schmedt Präkant 6201 Turning-in machine Schmedt Präkant 0601, good condition, cleaned and checked, max.size 600x600mm, min,150x150mm, max. board thikness 6mm, min.1,5mm.

Envelope feeder suitable for C4 and B4 envelopes

1 x Perforating tool 1 x Creasing tool width 80cm

Shrink Wrapping machine Minipack Replay 55 Year 2004 Electrical power supply V 200/230 Phase ph 1 Maximum power installed kW 3.15 Hourly output pcs/h 0-300 Available dimensions of the sealing bars mm 540x390 MAX product size mm 500x380x200 MAX Reel Dimensions (diameter) mm 250 MAX Reel Strip Dimensions (width) mm 600 Work Surface Height mm 940 Machine dimensions with the lid open mm 1260x810x1400 Machine dimensions with the lid closed mm 1260x810x1190 Weight (Net/Gross) Kg 105/126

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.

Ball Mill GMP Manufacturer: Pharmag consisting of Pharmag Universal Actuator Type UAM and the BM-5 Stainless Steel Ball Mill very good condition Documents available, incl. qualification.

Tube furnace Manufacturer: Nabertherm Type R170/750/12 These compact tube furnaces with integrated controls can be used universally for many processes. Equipped with a standard C 530 ceramic working tube and two fiber plugs, these tube furnaces offer unbeatable value for money. • Tmax 1200 °C • Single-zone design as standard • Double housing made of textured stainless steel sheets • Only fibrous materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used • Outer tube diameter 170 mm, heated length of 750 mm • Work tube made of C 530 ceramic with two fiber connectors as standard equipment • Tmax 1200 °C: Type N thermocouple • • Solid-state relays ensure low-noise operation • Defined application within the limitations of the user manual • NTLog Basic for Nabertherm controllers: recording of process data with USB  ...

Schlagkreuzmühle Manufacturer: Retsch Type SK 1 Without VA table The Retsch Type SK 1 impact cross mill is a highly developed laboratory device that is optimized for the efficient shredding of hard and brittle materials. This grinder is often used in laboratories in the chemical and pharmaceutical industries, in materials research and for the crushing of mineral substances. Key features of the Retsch SK 1: Grinding principle: The SK 1 works according to the principle of impact crushing. With rapidly rotating impact tools, the material is accelerated to a high speed and crushed by impact and friction. This enables effective and uniform shredding.

Granulator Manufacturer: Retsch Type SM 1 The Retsch Type SM 1 granulator is a versatile laboratory device designed for the efficient shredding of various materials. This type of grinder is particularly suitable for the preparation of samples in the chemical and pharmaceutical industries, materials research, and the food industry. Key features of the Retsch SM 100: 1. Grinding principle: The granulator works on the principle of cutting crushing. Thanks to the integrated blades made of high-quality stainless steel, precise and even shredding is achieved. 2. Application: The SM 100 is ideal for shredding soft to medium-hard materials, such as plastic, paper, food and many other organic and inorganic substances.

Checkweigher Manufacturer: Mettler-Toledo Garvens GmbH Type XS2 Max. 750g Min 0 g Belt speed 31.5 m/min Full enclosure FAT Protocol Last calibration 12/2023 Pneumatic ejection for: - Open tab - Weight - Inclined position Last use: Folding carton with tubes in the pharmaceutical sector