machines and plants for process engineering used for sale (7,616)

Used ball mill manufactured by LLEAL model ROTORMILL MH 45 Technical characteristics Ball diameter 2 mm Transportation Information Length 2000 mm Width 1800 mm Height 2100 mm Documentation Operation Manual In your state

ATEX immersion ball mill manufactured by Oliver and Batlle model HCP-1. Equipped with control panel. Technical characteristics Year of manufacture 2004 Motor 7.5 kW ATEX Working Conditions Transportation Information Length 1800 mm Width 1100 mm Height 1800 mm Documentation Operation Manual Plans In your state

RIMSA-3 crown mill made of stainless steel. Mounted on a stainless steel structure equipped with: -Loading hopper with auger for dosing -Bag filter to collect dust -Discharge hopper with butterfly valve -10 hp engine at 3,000 rpm -Electrical panel with control panel -Start button for the mill, stop button for the mill -Gear button for the auger, stop button for the auger -Emergency mushroom Reset button Rotary knob ON/OFF Technical characteristics: Chainring diameter: 315 mm Maximum rotor rotation speed: 4,500 rpm 10 HP engine at 3000 rpm No documentation In your state

Soft breaker made of stainless steel. Technical characteristics Motor 1.1 kW 50 Hz 1,500 rpm No documentation. In your state

Stainless steel mill on structure with 4 wheels. Motor 5 kW 220/380 V 50 Hz 1,430 rpm Transportation Information Length 1350 mm Width 800 mm Height 1800 mm No documentation In its state.

ATEX buffer hopper manufactured in stainless steel by E.BACHILLER in 2003, with a total capacity of 3,000 liters. Incorporates agitation and 4 support brackets. Motor: 4 kW 1435 rpm 50 Hz 380 V. Connections: Manhole of 440 mm in diameter. Top flange with an outer diameter of 315 mm. Lower flange with 620 mm outer diameter. Lower flange with an outer diameter of 340 mm. Hopper dimensions: Body height: 1,450 mm. Inner body diameter: 1,500 mm. Bottom diameter: 830 mm. Hopper inclination: 520 mm. Total capacity 3000 L Material Stainless steel Year of manufacture 2003 ATEX Working Conditions Transportation Information Width 1700 mm Height 3000 mm No documentation In your state

TAWI blower model SA350/Z Motor 3 kw 2900 rpm 50 hz 220 v Transportation Information Length 750 mm Width 500 mm Height 600 mm No documentation In your state

Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW No documentation Unused

Wall-mounted refrigerator from the brand RITTAL model BLUE e+ SK3189940 No documentation In your state

30 m3 stainless steel tank with pallet agitation and hermetic heat insulation. About 6 legs. Total capacity 30000 L Heating, cooling and insulation Heat Burning Stirring System Agitator Equipment dimensions Inner diameter 3200 mm Body height 3400 mm Discharge height 1080 mm Upper depth thickness 10 mm Body thickness 5 mm Bottom thickness 10 mm Transportation Information Width 3395 mm Height 6500 mm In your state

LEWA EH3 Model Three Diaphragm Metering Pump Skid Technical characteristics: Serving temperature: 40 ºC Density: 0.8-1.3 g/cm3 Flow rate: 167-333 L/h Maximum reflux pressure: 60 bar Maximum suction pressure: under load Documentation: Service Manual Year of manufacture 1996 Transportation Information Length 1700 mm Width 900 mm Height 1050 mm In your state

30 m3 30 m3 stainless steel tank with hermetic heat insulation and off-center agitation. About 4 legs. Total capacity 30000 L Heating, cooling and insulation Heat Burning Equipment dimensions Inner diameter 3100 mm Body height 4000 mm Upper depth thickness 4 mm Body thickness 3 mm Bottom thickness 4 mm Transportation Information Width 3300 mm Height 5292 mm Documentation Plans In your state

Tank made of second-hand fiber. It has a manhole at the top bottom and a manual valve at the discharge. It includes support legs and a side ladder. Equipment Setup Tapered bottom Manhole on top bottom Orientation and installation Vertical On legs No documentation In your state

Second-hand jacketed stainless steel reactor. Equipped with a propeller-type agitation at different heights. Motor 2.2 kW 400 V 50 Hz 1,410 rpm Working conditions ATEX Heating and cooling Heat Burning Shirt Orientation and installation Vertical No legs In your state

Nucha dryer filter made of second-hand stainless steel. It includes a hydraulic power plant, which controls: Up/down agitation. Trigger agitation. Open/close solids discharge. Raise/lower plate. Mounted on structure. Equipment dimensions Inner diameter 880 mm Internal height 805 mm Transportation Information Length 2,350 mm Width 2,100 mm Height 3,200 mm Weight 1,600 Kg No documentation Filtration area 0.6 m² In your state

ATEX basket mill from the NTD brand model UVI MILL-CN10 VE ATEX. Features: Maximum pressure 8 kg/cm2 Maximum temperature 50 ºC Maximum speed: 750 rpm Maximum shaft height 1000 mm Cowless diameter 248 mm Motor 7.5 kw 1460 rpm 50 hz 400 v Technical characteristics Model UVI MILL-CN 10 VE ATEX Year of manufacture 2017 Motor 7.5 kw 1460 rpm 50 hz 400 v Transportation Information Length 1560 mm Width 700 mm Height 1660 mm Weight 500 Kg Documentation CE Certificate Maintenance Manual Operation Manual Plans Electrical diagrams In your state

ATEX filter press from the TEPSA brand model HPLE of 3.3 m2, made of iron. Technical characteristics HPLE Model Year of manufacture 2017 Working pressure of the hydraulic unit 312 bar Number of Plates 15 Maximum plate capacity 15 Plate dimensions 470x470 mm Maximum filtration pressure 16 bar Equipment Setup ATEX Electrical panels Hydraulic power plant Closed execution Working conditions Pressure In your state

Stainless steel tubular heat exchanger from the MAFELCA brand with an exchange area of 43 m2. Connections: DN50 PN16, DN150 PN16, DN450 PN10. Technical characteristics Year of manufacture 2023 Housing volume 819 L Tube volume 497 L Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 15 bar Working temperature of the housing -10/160 ºC Working pressure of the housing 8 bar Equipment dimensions Tube length 4,102 mm Outer diameter tubes 19.85 mm Transportation Information Length 5,400 mm Width 920 mm Height 1,250 mm Weight 1,887 Kg Documentation Plans Exchange area 43 m2 Status Reviewed

Industrial HDT Hydrotreatment Reactor – 159 m³ – 177 Tons – H₂ Service For sale: Industrial Hydrotreatment (HDT) Reactor previously in H₂ service. The equipment is fully decommissioned, inerted, internally empty, and prepped for safe transport and dismantling. Ideal for refineries or petrochemical plants looking to expand or replace existing hydroprocessing units. Key Specifications: Equipment Type:Hydrotreatment Reactor (HDT) Volume / Capacity: 159 m³ Empty Weight: 177 Tons (177,000 kg) Previous Service: Hydrogen (H₂) Condition: Used / Decommissioned. Fully inerted and internally emptied. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets (P&ID, metallurgical specs), or to arrange a site inspection.

Counter-current pellet cooler manufactured by MÜNCH-Edelstahl GmbH, model SDCC5, unused. The equipment works by means of a counter-current air circulation system, allowing the temperature and surface humidity of the product to be reduced before storage or packaging. It is equipped with square-section cooling chamber, integral discharge system, upper rotary airlock driven by geared motor, hydraulic unit for driving the discharge system, and level and temperature sensors for process control. Its nominal capacity is up to 5 tons/hour for pellets of 6 mm in diameter, depending on the product and operating conditions. Technical characteristics SDCC5 Model Year of manufacture 2014 Unused

RIERA NADEU model 200F-1000 centrifuge in 316 stainless steel Technical characteristics Model 200-F1000 Maximum load (density 1.25 kg/dm³) 250 Kg Payload 200 L Maximum speed 1,085 rpm Equipment dimensions Basket diameter 1,000 mm Cake thickness 145 mm Basket height 480 mm No documentation In your state

Reactor made of stainless steel with half a barrel, and a capacity of 900 liters. Offload centered on the bottom. On 4 labels. With 2 current breakers. Manhole diameter of 450 mm. 4 flanges and 2 sight glasses at the top bottom. 1 flange intended for off-centre agitation on the upper bottom. Volume 900 L Material Stainless Steel 316/316L Shirt or mid-calf material Stainless steel Equipment Setup Mid-round Breakers About Labels Equipment dimensions Body inner diameter 870 mm Inner body height 950 mm Transportation Information Height 2550 mm Width 1350 mm In your state

Used Calmic Eurovent stainless steel vacuum tray dryer. It has approximately 3 square meters of drying area. Includes (3) individual drying compartments approximately 980mm wide X 1010mm deep X 160mm high. It also includes (6) stainless steel trays approximately 470mm wide X 945mm long X 40mm deep. Material Stainless Steel 316/316L Weight 1155 Kg In your state

ATEX stainless steel 316 3V Tech 250 FPP/SD FM nucha filter dryer with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industry. Material Stainless Steel 316/316L Technical characteristics Model 250 FPP/SD FM Year of manufacture 2010 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Working pressure half-round/liner -1/+10 bar Working temperature of half round/shirt -25/+200 ºC Half-calf/shirt volume 80+20 L Filtration area 2.5 m2 Equipment Setup ATEX Electrical panels Bag filter Hydraulic power plant Centrifugal pump Transportation Information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 Kg Unused

Stainless steel nucha filter dryer from the E.BACHILLER brand of 0.4 m2. Year 1987. Hydraulic power plant with 7.5 hp 1410 rpm 50 hz 220 v motor Technical characteristics Year of manufacture 1987 Working body pressure 3 bar Body working temperature 300 ºC Total body volume 680 L Working pressure half-round/liner 3 bar Working temperature of half round/jacket 300 ºC Half-round volume/shirt 28 L Filtration area 0.4 m2 Equipment Setup Hydraulic power plant Transportation Information Length 2100 mm Width 2100 mm Height 2100 mm Weight 500 Kg No documentation In your state

Decanter manufactured by RIERA NADEU manufactured in ASTM 316L - DUPLEX, model 600 D AS-2300. Features Year of manufacture 2013 Rotor inner diameter 356 mm Maximum permissible speed 3570 rpm Electric power 30 kW Maximum permissible flow rate 7 m3/h Product temperature plus/min +60/-10ºC Max/min manifold pressure 4000 Pa Centrifugal factor max. 2500 g Maximum permissible density 1250 kg/m3 Transportation Information Length 3000 mm Width 1600 mm Height 1100 mm Unused

Decanter brand WESTFALIA model AD0509, manufactured in 2003. Features: Rotor diameter: 300 mm Maximum speed: 4500 rpm Maximum flow: 7 m3/h Product temperature: 5/80 ºC Maximum density: 2.6 kg/dm3 Height of complementary legs: 920 mm Electrical panel dimensions: Height 2200 mm Width 1600 mm Depth 600 mm Transportation Information Length 2600 mm Width 700 mm Height 1050 mm Documentation Operation Manual Electrical diagrams Spare parts list In your state

Second-hand decanter manufactured by PIERALISI in 2007, model BABY 2. Maximum density of 1.4 kg/dm3. Maximum revolutions 5,200rpm No documentation. In your state

Decanter from the brand PIERALISI model BABY 1. Features Year of manufacture 2016. Maximum density 1.4 kg/dm3 Maximum revolutions 5200 rpm Motor 5.5 kw 2915 rpm 50 hz 400 V No documentation Transportation Information Length 1850 mm Width 1150 mm Height 1450 mm Weight 620 Kg In your state

GEA Westfalia UCA 450-00-02 centrifugal decanter manufactured in 1998, equipped with a complete flocculant preparation and dosing system. The equipment has a product feed pump, flocculant dosing pump, flocculant concentrator pump and auger for solids discharge. Includes electrical panels, maximum speed of 3,000 rpm and capacity to work with sediments of up to 2,000 g/dm³. It comes with an operating manual, electrical diagrams and a list of spare parts. Technical characteristics Model UCA 450-00-02 Year of manufacture 1998 Maximum speed 3,000 rpm Maximum sediment density 2,000 g/dm³ Equipment Setup Electrical panels Product Feed Pump Flocculant dosing pump Flocculant concentrator pump Complete flocculant system Screw for solids discharge Documentation Operation Manual Electrical diagrams Spare parts list Product Type Sludge In your state