machines and plants for process engineering used for sale (7,610)

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are offering for sale 2 Units of Rauch MDO650 with Dosing Pipe System and Mass Preheating Station ( mass feeding via robot is not included) : Unit 1 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: Mass preheating station MVE 750 E - Year of Manufacture: 2015 Unit 2 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: - Mass preheating station - Year of Manufacture: 2015 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Rauch Model: MDO1000 E with dosing pipe system and ingot preheating station Year of Manfucture: 2018 Ingot preheating station - Year of manufacture: 2014 Specifications: - Melting capacity: 1,000 kg/h - Holding capacity: 2,950 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Stäubli Model: RX160 Year of Manufacture: 2018 Type of Machine: Operating Hours: 500 h Mass: 248 kg / 546 lb Nominal Payload: 20 kg / 44 lb Robot Arm Specifications: - Model: RX160 (Series 160) - Configuration: 6-axis - Mounting: Floor-mounted - Arm Length: Standard - Color: Standard RAL 1028 (Melon Yellow), textured paint, satin finish - Integrated: Two solenoid valves for compressed air - Lubrication: H1 Food Grade Oil - Mechanical limit on Axis 1 - Brake selector switch with 5 m cable to separate box Controller: - Model: CS8C - VAL3 Controller - Operating System: SRC Version 7.x - Version: Built-in (IP20) - Power Supply: MULTI 3x400V, 50/60 Hz - Cooling: Standard cooling with airflow from bottom to top Cabling & Connections: - 15 m robot connection cable, double pluggable (arm + controller) - Angled outlet plug on the arm (right side) - Side connection at t ...

1) Vertical Rubber Molding Machine Manufacturer: Rutil Model: 2000/250 RS SX-F Stations: 1 Clamping Force: 500 Ton Heating Platens Dimensions: 520x650 mm Max Shot Volume: 2000 cc Max Daylight: 450 mm Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine / NEEDS REPAIR - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine NEEDS REPAIR - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x50 ...

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - .ucymachines/

Sludge Dewatering System Consisting of: 1 Screw Press (see Image I) - Dimensions: 2500 x 1500 x 2100 - Weight: 1 t. 1 Flocculant Preparation Unit (see Image II + Dimensions) - With agitator, filling system, and level probes - Capacity: 2000 l. Pumps of the Allweiler brand with Variator - 1 Feed Pump: 1.5 – 13.5 m³/h - 1 Dosing Pump: 45 – 275 l/h - 1 Dosing Pump: 150 – 880 l/h Conveying Equipment - 1 Trough Screw Ø 200 x 1370 - 1 Inclined Screw Ø 200 x 4500 Control System - Electrical Cabinet: 800 x 1000 x 300 - Connection Power: 8.8 kW - Separate pressure control - With manometer and regulating valve Output 300 kg/h, consisting of machine, conveyor and dosing pumps, coagulant station 2,000 lt. 2 conveyor screws, + control and all operating instructions. Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Machine is new. Has not been used! Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curt ...

Warman Pumps Listing 1.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 2.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 3.Pump Type: 3 / 2 CAH 4.Pump Type: AH Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine Description - Machine Type: 6-Axis Robot - Manufacturer: Martin Systems - Model: RoboCube Maxi - Type: MRC 242499-10 - Fanuc M-20iA - Year of Manufacture: 2019 - Payload: 20 kg - Maximum Reach: 1811 mm - Repeatability: 0.08 mm - Weight: Approx. 250 kg - Dimensions: L 2900 x W 1600 x H 2100 mm --------------------------------------------------------------- Condition of Use - Condition: - Like new, well-maintained, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Axial fanZIEHL-ABEGGseries FB4-bladed aluminium sheet bladediameter: 497 mmvoltage: 400Vfrequency: 50 Hzdegree of protection:: IP 54Dimensions: 590 x 590 x 225

Centrifugal fan, centrifugal duct fanHELIOSRRK 200speed: 2395 rpmmotor : 115 W230 VInlet: Ø 200 mmDimensions: 350 x 350 x 260 mm

Fan with filterM+W GROUPFFU 1212 AU HI2 R0,0,0 648 m3/s0.45 m/sfanK3G400-AA21-21motor: 0.345 kW220 VfilterTROXF784R00RT07300Dimensions: 1300 x 1300 x 540 mmused, tested !

Centrifugal fan, centrifugal fan, centrifugal fanPAGUS, SEWmotor type: DFV 160L4/TF/AMA115 kW1460 r400 / 690 Vpneumatic wheel diameter: Ø 800 mmDimensions: 1380 x 1360 x 1330 mmused, tested !

Plate spring pressure gaugePAGUSDuratherm 600Ø: 100 mm0 to 10 barsafety glass1/2 inchstainless steel !Dimensions: 185 x 102 x 98 mm

Centrifugal fan, centrifugal fan, centrifugal fanPAGUS, SIEMENSimpeller: Ø 400 mmmotor: 0.55 kW1400 rpm220 / 380 Vmounting plate: 360 x 360 mmstainless steel !Dimensions: 400 x 400 x 420 mmused, tested !

Bimetal thermometerPAGUSØ: 100 mm0 to 120 °CL= 1251/2 inchstainless steel !Dimensions: 270 x 102 x 45 mm

Centrifugal fan, centrifugal fan, centrifugal fanPAGUS, ABBimpeller: Ø 370 mmmotor: 0.55 kW1410 rpm220 / 380 VDimensions: 860 x 550 x 650 mmused, tested !

Axial fan, axial fan,axial fanWOODS212945/51Bimpeller: Ø 560 mmmotor: 3,3,000 8 kW2910 rpm380 / 420 VIP55Dimensions: 650 x 650 x 400 mmused, tested !

Centrifugal fan, radial fanMEISSNER & WURSTTZA 01-400-6/12 S4,4,000 2 / 0.72 KW890 / 440 rpm380 VIP10hole dimension flange: 540 x 540 mmOverall dimensions: 800 x 650 x 740 mmused, checked!

Centrifugal fan, centrifugal fan, centrifugal fanUTENTRAU/AP 35motor: 2.2 kW2800 rpm230 / 400 VNew ! Dimensions: 650 x 550 x 650 mm

Centrifugal fan; Centrifugal blowerOverall dimensions: 120x90x106used, tested !

Vacuum valve, spring bellows angle valveLEYBOLDCat no. 29721Alu !Dimensions: 105 x 60 x 35 mm

Resistance ThermometerEAWPt100TGL 0-43760300 °CL= 180 mm3/4 instainless steel !New !Dimensions: 320 x 100 x 75 mm

RTDEAW2xPt100TGL 39438-30 - 300 °CL= 180 mm3/4 inchstainless steel !New !Dimensions: 330 x 90 x 70 mm

Machine Glass Thermometer, ThermometerCONATEX0 to 160 °C580781SM000066L= 100 mm1/2 inNew !Dimensions: 380 x 90 x 40 mm

Machine Glass Thermometer, ThermometerTECSIS0 to 100 °CL= 65 mm1/2 inchNew !Dimensions: 285 x 35 x 55 mm

Ball valve, shut-off valveREXROTH082130091116 barG 1/2function 3/2New !Dimensions: 105 x 70 x 70 mm