grinding machines used for sale (2,172)

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 525 mmtable surface area: 960 x 400 mmdimensions of grinding wheel: 350 mmtable height over floor: mm: 600 x 400 mmgrinding spindle speed: 3000 U/mintable load capacity: 1100 kptotal power requirement: 8,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,4 x 1,9 x 2,1 mSurface grinding machine- Magnetic chuck- Coolant system with filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Maximum shaft rotation speed 2880 rpm. - Maximum peripheral velocity: 35 m/s. - Maximum length of the knife head 250 mm. - Wheel diameter 150 mm. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1700 x 1100 x 1900 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-37

- Total installed power approx. 1.10 KW. - Disc diameter from 100 mm to 650 mm. - Disc shaft diameter from 6 mm. - Disc thickness up to 6 mm. - Tooth pitch from 7 mm to 100 mm. - Angle of attack up to -10°. - Clearance angle from 0°. - Diameter of the abrasive disc from 100 mm to 125 mm. - Peripheral speed up to 23 m/s. - Coolant pump flow rate 48 l/min. - Coolant tank capacity 48 l. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1300 x 900 x 2050 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-36

Special feature: Stepless grinding wheel speed for copper grinding work Auction-ID: A7-48614-20

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-67

Saw blade diameter: 100 to 1720 mmTooth pitch: 7 to 110 mmRake angle: -20° to + 45° Clearance angle: 8° to 45°Grinding wheel Ø100 mmSpeed grinding spindle3,600 rpmTotal weight approx. 550 kg Auction-ID: A7-48614-8

Saw blade capacity: Diameter up to 1000 mmTooth pitch: up to 42 mmGrinding wheel Ø: up to 250 mm Maximum. Saw blade thickness: up to 10 mm Auction-ID: A7-48614-21

Feeding takes place on the side of the top of the grinding head and handwheel for the transverse feed path of the grinding wheelGrinding length: 820 mm, longitudinal feed of the grinding carriage with three-phase motor: 380 V. Water cooling works WITHOUT a pump, because the grinding wheel runs sideways in the water. Auction-ID: A7-48614-6

Conversion to Linux CNCworking area: 1150 x 600 mm, table: 3400 long, weight: approx. 2500 to 4000 kg. Auction-ID: A7-48614-18

Water pump is defective Auction-ID: A7-48614-31

Note: Converted Saw Blade Sharpening Machine to Milling Cutter Grinding MachineRequires Air Pressure, Without Oil Auction-ID: A7-48614-5

Grinding area: 800 x 500 x 400 mmGrinding surface: 800 x 600 mm, Grinding motor: 9 - 17 kW Auction-ID: A7-48614-15

Weight: approx. 18 tgrinding length: approx. 4.10 m longBed: 7300 mm longincluding: segment grinding head, the original grinding spindle has already been ground over, the plain bearing has to be adjusted, a butt head is supplied to process the bending beams. Auction-ID: A7-48614-19

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-297

Functions: Grinding machine for grinding chip splittersSaw blades: Diameter from approx. 20 to 400 mm, including 1 x mobile air compressor 85 cm long and a spare machine for cannibalization. Auction-ID: A7-48614-10

Saw blade diameter: minimal. 80 mm up to a maximum of . 710 mm Tooth Pitch: 3 mm to 25 mmMaximum. Saw blade thickness: approx. 6.5 mmWorking speed: infinitely adjustableGrinding wheel diameter: 200 mm Working speed: infinitely adjustable, usually between 10 and 45 teethWeight: approx. 600 to 1200 kg. Automatic chamfering of both bevels in one rotation Auction-ID: A7-48614-7

Circular saw blade diameter from 80-710 mm, including accessories and cladding. Auction-ID: A7-48614-34

Auction-ID: A7-48614-30

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-297

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-67

Max. grinding wheel diameter: approx. 100 mm Auction-ID: A7-48624-12

Auction-ID: A7-48614-33

Saw blade capacity: Diameter up to 1020 mmTooth pitch: Up to 42 mmGrinding wheel Ø: Up to 250 mm Maximum. Saw Blade Thickness: Up to 10mmPower Supply: 400V, 3~(Three-Phase), 50Hz. Auction-ID: A7-48614-1

Weight, approx. 1200 kg Auction-ID: A7-48614-28

Used, the X axis is out of serviceNote: Due to the size of the machine, it is recommended to inspect the machineDisassembly and loading by buyer, disassembly possible by seller upon requestTransport dimension: approx. 5.50 x 3.20 x 3 m (L/W/H), the head section and side panels can be disassembled. Auction-ID: A7-48614-16

Max. sanding belt width: 120 mm Auction-ID: A7-48624-4

Serial number: 95-8157Max. grinding wheel diameter: 100 mm Auction-ID: A7-48624-11

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.