grinding machines used for sale (2,502)

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. We offer the grinder separately, without extraction and track. For straight round or oval pipes.

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

Inv. Num. : 6614 Type: - Producer: JUNG Generated: Parameters: Equipment: DRO In good technical condition.

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg

Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

Inv. Num. : 8568 Type:- Producer:- Created: 1980, GO 2025 Parameters: GO 2025: Complete replacement of the electrical system Addition to the NC control system Replacement of hydraulics (servo drives) Fortuna for internal grinding Rotary Table X Replacement of worn parts Grinding the bed

Key data: 400 mm, 1500 mm

Control Siemens ... Simatic OP17 Max. grinding diameter ... 400mm Max. sanding length ... 1500mm Max. workpiece weight ... 500kg Internal grinding Machine weight ... 9200kg L x W x H ... 6220x2760x1950mm The machine is in good condition, possible to test under power.

Inv. Num. : 8331 Type: SKR 1200-NC Producer: REFORM Created: 1995 Parameters: Control system: Siemens SINUMERIK Max. workpiece diameter: 1200 mm Maximum length of the workpiece: 1000 mm Max. workpiece weight: 300 kg Max. speed: 1000 1/min Length: 2500 mm Width: 1500 mm Height: 1800 mm Weight: 4000 kg

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

Inv. Num. : 7323 Type: BUAJ 30 Producer: Junker Created: 1999 Parameters: Table dimensions: 1380x160 mm Distance between tips: 630 mm Machine weight: 2800 kg

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

Type SAXW 63/3000 Producer WMW Meuselwitz Year of manufacture 1979 Parameters 63mm, 3000mm Location Praha CZ Swing 750 mm Distance between centres 3000 mm Max. weight of workpiece 6000 kg Machine suitable for modernisation

L & Z lathe WEILER CONDOR B incl. three-axis digital display -CE - Identifier -Machine from educational institution / very well maintained -Tip height 165mm -Circumferential diameter over bed 330mm -Circumferential diameter over face slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm - Automatic / longitudinal & face feeds -Thread/Metric/Inch etc. -Rod passage 40mm -Tailstock / quill holder MK 3 -Multifix base holder & inserts -Three-jaw end-ender 200mm -Electric lining protection -Spindle protection cover - 2x Emergency / Off -Coolant device -Swarf back wall -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 1200Kg

Universal tool grinder DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke for twist grinding 190mm -Longitudinal adjustment grinding spindle approx. 5mm -Vertical adjustment grinding head approx. 320mm -Transverse adjustment tool carriage approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / part head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface tool carriage approx. 500x180mm -Max workpiece diameter between the tips 130mm -Max. workpiece diameter / flying clamping (universal parting head) 620mm -Digital display -Measuring optics -Other accessories ( SEE PICTURES) -Documentation -Tool cabinet

ABA-WERK Aschaffenburg Hand Lever - Surface Grinding Machine FFK -Total power: 1.75 kW -Magnetic clamping plate: approx. 300 × 150 mm -Working range: approx. 350 × 300 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm -Grinding spindle speed: approx. 2,800 rpm -Table adjustment longitudinal: manual -Table adjustment transverse: manual -Height adjustment: manual -Magnetic Clamping Plate: Permanent Magnet -Machine feet -Grinding wheel protection -Extraction system Dimensions: LxWxH 1.1x1.1x1.7 meters / Weight 700Kg

Chips - Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500mm -Speed / power 1000 rpm adjustable up to max. 1400 rpm -Incl. documentation & electrical plan Dimensions: LxWxH 0.7x0.7x1.2 meters / Weight approx. 250Kg

Surface Grinding Machine Jung JF 520

Surface Grinding Machine Jung JF625

Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment

A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.

Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details.

Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible.

Key data: 40 mm, 150 mm, 150 mm

Used and refurbished centerless cylindrical grinding machine Palmary PC-12-SPS, year of manufacture 2017, 2025 mechanical and electrically overhauled with new SIEMENS S7 control system. Including coolant with paper tape filter, various support rulers, Newly painted. The machine is in mint condition. The machine does not have a fixed center. Machine has a CE mark, spare parts and training can be done by the salesman. Current delivery time approx. 10 weeks Grinding wheel: 305x150 mm, regulating disc 205x150 mm, regulating disc speed 10-100 (250) mm, rotational speed the SS 33 m/sec, grinding spindle drive 5.5 kW, weight 1.65 to, space requirement approx. 2.05 x 1.2 m