saws used for sale (1,297)

Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.

roll diameter: ? mmthroat: 280 mmworkpiece height: ? mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 3849Vertical bandsaw THIEL Thiel 17Table 500 x 590Clearance approx. 280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 400 mmsaw band length: 5700 mmcutting width: 1,3 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mstepless cutting speedhydraulic material clampinginfeed automatchip conveyorcoolant deviceroll conveyorTechnische Daten:Schnittbereich rund / cutting range round 400 mmSchnittbereich vierkant /cutting range square 400x400 mmMehrfachvorschub / multiple infeed 20000 mmSchnittgeschwindigkeit / cutting speed 20-110 m/min.Sägebandlänge / dimensions of the saw band 5700x41x1,3 mmAntriebsleistung / drive capacity 8 kWGewicht der Maschine ca. / weight 2700 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diam ...

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

dimensions of saw-band: 2910 x 27 x 0,9 mmcapacity 90 degrees: round: 240 mmcapacity 90 degrees: flat: 310 x 240 mm: 200 mm: 200 x 200 mm: 200 mm: 200 x 200 mm: 140 mm: 200 x 140 mmrest piece length: 60 mmwork height max.: 900 mmdimensions: 800 x 1750 x 1500 mmweight of the machine ca.: 470 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions: 1150x1500mm

Axle:XZ (2-axle) Ø 350 Dimensions: 1800x4400x2000mm

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 mm: 165 x 310 mmsaw band length: 2.725 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tThe Z252/DG has the following equipment:- Hydraulic semi-automatic,- Double miter 60° left/45° right- emulsion pump,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

saw blade diameter: 420 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: flat: 160 x 100 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: square: 130 x 80 mmturning speeds: 3000 U/minengine output: 2,0 kWtotal power requirement: 2,0 kWweight of the machine ca.: 190 Kgdimensions: 3,0 x 1,0 x 1,3 mUnderfloor aluminum circular saw- Hydropneumatic semi-automatic- pneum. Workpiece clamping device- Roller conveyor with material stop- Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: flat: 160 x 130 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: flat: 110 x 125 mmsaw blade turning speeds: 3000 U/mintotal power requirement: 1,75 kWweight of the machine ca.: 140 kgdimensions: 1,0 x 0,65 x 1,5 mAlu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hacksaw Fortuna Mitre cuts Cable needs to be replaced. Length 1.20 m Height 1.00 m Width 0.60 m

cutting diameter: 320 mmcapacity 45 degrees: round: 180 mmcapacity 90 degrees: square: 320 x 320 mmcapacity 45 degrees: square: 180 x 180 mmstrokes per minute: 40 - 57 - 80 - 115 1/mincutting speed: 16 - 22 - 31 - 45 m/mindimensions of saw-blade: 575 x 55 x 2,5 mmtotal power requirement: 3 kWweight of the machine ca.: 700 kgdimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m- with mitre cuttingAccessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 560 mmsaw band length: 7.260x54x1,6 mmControl: mit 99 Programmen work height max.: 650 mmChip coveyor: inkl. power capacity - table: 10 HPsawing motor: 650 kWweight of the machine ca.: 4.800 kgdimensions of the machine ca.: 3.400x2.050x2.380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23402 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Infinitely variable belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - With: - Saw blade welder IDEAL -Lighting

pole-switchable motor 1.7 / 2.2 kW Saw blade size max. 275 mm Cutting speed approx. 40 / 80 rpm Mitre infinitely variable by 90° to the left and by 90° to the right Cutting area approx. : 90° profile , square / round : 80 / 80 mm

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mPROMOTIONAL PRICE2-column high-performance automatic band saws from the SBS seriesThe SBS series impresses with its sophisticated technology, high quality and longevityand unrivaled, sophisticated standard equipment.• Modern SNC 20 control for CNC version• Frequency-controlled saw drive• Control buttons with pictograms• Work light• Powered chip brush• Hydraulic belt tension• Clamping pressure regulation• Double vice (before and after the belt)• Creep path for positioning• Bundle tension prepared electrically and hydraulically• Chip conveyorThe SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. W ...

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg