saws used for sale (1,241)

saw blade diameter: 350 mmcutting diameter: 120 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 90 degrees: flat: 140 x 110 mmcapacity 45 degrees: flat: 140 x 90 mmtotal power requirement: 2,6 kWweight of the machine ca.: 0,5 tdimensions of machine L x W x H: 0,95 x 1,38 x 1,85 mAccessories: 1 used sawblade 350 mmø, coolant- with hydr. clamping of workpiece and hydr. feed of sawblade -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 215 mmband length: 400 mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 260 mm, 3660 mm

very well preserved FORTE , at call

Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t

: 325 mm: 4380 mm: 400 mm: 325 mm: 400x325 mmdimensions of saw-band: 4380x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 350 mm: 4160 mm: 400 mm: 350 mm: 400x350 mmdimensions of saw-band: 4160x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

heavy gear, for interrupted cutting Cutting height 125 mm Cutting length 400 mm Mitre right + left by 60°

Key data: 350 mm, 100 mm

Automatic with power gearbox also for high-alloy materials.

Mössner Rekord SM400 band sawin good condition

Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

range L-W-H: 3,50/2,40/2,20 mmweight of the machine ca.: 3500 kgProducer: KASTO,Type: HBA 420 AU,C93I8DeYear of production: 1995Fully automatic NC horizontal band sawwith hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off,Dimensions (width x height x depth): approx. 400x200x350 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

max. saw blade D 350 mm, Miter: 45-90° left + 45°-30° right, Speeds/ motor power 9/18/36/74 rpm. 1.5 + 1.8 kW, Automatic cutting feed infinitely adjustable, pneumatic jaw clamping Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm Square 90° 100 x 100 mm Square 45° 95 x 95 mm Square 30° 85 x 85 mm Dqyu0F Round 90° 120 mm Round 45° 120 mm Around 30° 100 mm Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat 10 x 10 mm coolant device, roller conveyor, Voltage 380V-50Hz Connection cable with 16 A CEE plug, new saw blade, Operating instructions with spare parts list and electrical circuit diagram, new engine

roll diameter: - mmthroat: 1000 mmworkpiece height: 350 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 x 1 x 2 mNo. 4428Horizontal band saw SAMUR S-1000 VCutting height 350 mmCutting speed 20-800 mmBlade length : 4,550 mm.Blade width : 4 to 15 mm.Infinitely variable cutting speed : 23-711 m / minElektromot r380 VTable dimensions: 610 x 610 mm Table extension leftWelding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 320 mmthroat: 310 mmworkpiece height: 230 mmtable-size: 505 x 505 mmcutting speed: 12 - 375 m/minturning speeds: 39 - 1230 U/minsaw band length: 2460 - 2620 mmvoltage: 400 Vtotal power requirement: 1,3 kWweight of the machine ca.: 420 kgdimensions of the machine ca.: 0,80 x 0,80 x 1,65 mwelding equipment: IDEAL air blow equipment: - serial-no.: 22600-77/14- with stepless feed- welding equipment IDEAL- grinding wheel- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

cutting diameter: 150 mmband length: . mmstroke: . mmsaw band length: . mmtable height: . mmtotal power requirement: 0,5 kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 0 mmcutting width: 0 mmtotal power requirement: kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: . mmcutting width: . mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 150 mmband length: . mmstroke: . mmsaw band length: . mmtable height: . mmtotal power requirement: 0,5 kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mmthroat: 390 mmworkpiece height: 240 mmsaw band length: 2980 mmtable surface area: 500x600 mmweight of the machine ca.: 350 kgdimensions of the machine ca.: 650x1100x1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Saw blade dimensions 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - Cutting range at 90° around 80 mm - flat 95 x 60 mm - Mitre adjustable up to 45 ° - Material vise - Drive 400 V / 0.5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

roll diameter: 420 mmthroat: 410 mmsaw band length: 3150 - 3260 mmsaw band width: 3-16 weight: ca. 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

dimensions of saw-band: 3350x27x0,9 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: flat: 300x260 mmcapacity 45 degrees: round: 200 mmcapacity 45 degrees: flat: 180x180 mm: 130 mm: 120x120 mm: 25 mmmin. dia.: 5 mmwork height max.: 900 mm: 35/75 m/minweight: 710 kgStandard equipment:- Fast miter adjustment by scale- miter turning point is the point of intersection between saw blade and material system,no changes in the length measure- Manual material tension - at each angular position of the saw frame is theMaterial stretched parallel in 90 °- Cutting pressure reduction by weight of the heavy, torsionally stiffSawing frame and fine adjustment depending on the material cross section via hydraulicdamping cylinder- Machine stand with chip collecting tray- saw blade drive with limit stop- Precise saw band carbide roller guideAdditional standard equipment 260 DG-HS:- Hydraulic liftin ...

: 65 mm: 50 mm: 83 mm: 82 mmrest piece length: 40 mm: 6 mmdimensions of saw-blade: 250 x 2 x 1.7 x 32 mmspeed: 50-200 m/minengine output: 7,5 kW: 200 mm/sec.work height max.: 845 mmdimensions: 2225x1950x1980 mmweight of the machine ca.: 2500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.