saws used for sale (1,285)

: 400 x 32 mmcapacity 90 degrees: round: 145 mmcapacity 90 degrees: square: 130 x130 mmcapacity 90 degrees: flat: 300 x 80 mmcapacity 45 degrees: round: 105 mmcapacity 45 degrees: square: 115 x 115 mmcapacity 45 degrees: flat: 250 x 60 mmtotal power requirement: 1,8 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 800 x 1100 x 1400 mmDomestic equipments:- stepless, electronic speed control- Optional hydraulically controlled or manual belt arm lowering- Saw arm can be swiveled up to 60 ° right- quick release vice- Band guide with 8 ball bearings- Hydraulic saw blade clamping with clamping pressure display and strip break-off- Including coolant device- incl. machine cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mm: 10-40 mm: 10-40 mm: 40x10-40 mmcapacity 90 degrees: square: 10-80 mmweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350 x 200 saw band length: 3375 x 27 x 0,9 mmband speed: 18 - 110 m/mintable height: 940 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,61 tdimensions of the machine ca.: 1,5 x 1,75 x 1,9 mDouble miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic coolingFigure is semi-automatic.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 15 - 70 U/mintotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mSPECIAL PRICE!High-performance vertical circular saw VKS 370 (20177/201178)· miter left 60° + right 45°· Vice with double clamping arm· Robust prism guide of the saw head, adjustable dovetail guide.· Chip brush· Automatic cooling· Metal handle for high clamping force· Solid, strong cast iron table· Spring pack· Chip removal brushATTENTION: Price is without saw blade! (saw blade price EUR 204)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 105 mmsaw band length: 1140 x 13 x 0,65 mmcutting width: 100/100x105 mmcapacity 60 degrees: round: mmcapacity 45 degrees: flat: 55 x 55 mmcapacity 45 degrees: round: 60 mmtotal power requirement: 0,18 kWweight of the machine ca.: 18 kgdimensions of the machine ca.: ca.400 x 300 x 350 mmWe must ask you to request machines from us on a daily basis in the near future.Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.Gear drive, automatic belt tension, electronically adjustableBelt speed from 20 to 100 m / minDue to the light aluminum housing, the machine is very light and therefore goodmobile use.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mmsaw band length: 2.080 x 20 x 0,90 mmcutting width: 100x185 mmconnected load frequency: 230 Vband speed: 35 und 70 stufenlos m/minmitre joint 90° (angle-iron till): 60 °total power requirement: 2,35 KWweight of the machine ca.: 195 kgdimensions of the machine ca.: 1280 x 550 x 1480 mmWe must ask you to request machines from us on a daily basis in the near future.Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.An inexpensive and powerful band saw for sporadic workshop useThe Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -60 ° left.After the cut, the machine stops due to a safety limit switch.The lowering is continuously adjustable via a hydraulic system.The manual lifting of the saw arm after the cut can - on anyPosition. The saw arm remains in the  ...

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

cutting diameter: 355 mmdimensions of saw-band: 3770 x 34 x 1,1 mmcutting speed: 20 - 80 m/mincutting width: 490 x 280 mm: 290 mmImpact energy: 250 mm: 230 mm: 180 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,7 tdimensions: 1,43 x 0,72 x 1,7 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm  ...

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997

Circular saw Manufacturer: MEP Type: Tiger 350

Table saw

Hacksaw Kasto BSM 403

Band length: min. 3200mm, max. 3400mm With welding machine

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

saw-blade dia.: 315 mmcutting capacity - round: 100/ 90° mmcutting capacity - square: 90 x 90 /90° mmcutting capacity - flat: 85 x 110 / 90° mmcutting capacity - flat: 85 x 85 / 45° mmcutting capacity - round: 100 / 45° mmcutting capacity - square: 85 x 110 /45° mmsaw blade turning speeds: 25 / 50 U/minvoltage: 400 V / 50 HzMotor output: 1 kWmachine weight ab.: 240 kgDimensions (L/W/H): 980 x 790 x 780 mm• saw is fitted on a lower frame,• 2-step motor,• pneumatical quick clamping vise,• material back stop,• coolant device,• mitre ability: 40° left, 45° rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 370 mmcutting capacity - round: 115/ 90° mmcutting capacity - square: 110 x 110 /90° mmcutting capacity - flat: 110 x 110 / 90° mmcutting capacity - flat: 100 x 100 / 45° mmcutting capacity - round: 115 / 45° mmcutting capacity - square: 100 x 100 /45° mmsaw blade turning speeds: 22 / 44 U/minvoltage: 400 V / 50 HzMotor output: 3 kWmachine weight ab.: 270 kgDimensions (L/W/H): 980 x 790 x 780 mm• saw is fitted on a lower frame,• 2-step motor,• pneumatical quick clamping vise,• material back stop,• coolant device,• mitre ability: 40° left, 45° rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg