saws wood used for sale (1,048)

N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

Format sliding table: 3200mm Engine power: 400V 5.5 KW (7.5hp) Cutting height: 125mm Saw blade: 300-400mm swivel: 90-45 electrically pivotable and height-adjustable Industrial scoring unit for 120mm scoring saw blade Parallel cutting width: 1500mm

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Technical description: -connection achievement: 2 kW - tax tension: 24 V - connection tension: 400 volts - air pressure connection: 7 cash - saw blade: 300 mms ? - max. saw width: 150 mms - max. saw height: 100 mms - length poster table: 4,000 mms - length outlet table: 2,500 mms - saw is tiltable about control - poster is positionable about control

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

cutting width 700 mm cutting height 150 mm saw blade diameter 500 mm motor power about 4.0 kW hydraulic Saw stroke

Cutting width approx. 700 mm Cutting height approx. 150 mm Saw blade diameter 500 mm Engine power approx. 4.0 kW hydraulic saw blade stroke

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

technical data: - with continuous chain bed and hydraulically clocked pressure rollers - with digitally positioned separator for simultaneous separation of boards and sprices - Slides for the Spreissel are included in the scope of delivery - max. wooden length 2.1 m

Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, ...

This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine.

This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information.

Year of construction 1990 S/ N 24745 Machine No. 94800 Manufacturer Interholz Raimann GmbH Technical data: Width of the transport chain 430 mm The width of the shaft 650 mm Maximum cutting height 120 mm Diameter of the saw blade 350 mm Diameter of the spindle 60 mm Diameter of the sleeve 80 mm Minimum length of 69 cm 37 kW main motor Shaft speed 3000 rpm Feed motor 5.5 kW Infinitely variable 0 to 50 m / min Feed adjustable Inverter Centralised lubrication Track Automatic height adjustment of the spindle Automatic height adjustment of the rollers Upper take-off rollers Pneumatic tension rollers Centralised lubrication Overall machine dimensions: Length 330 cm Width 225 cm Height 220 cm Weight 7000 kg

Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm ) Width of saw pulley face-optional 5 1/2" (140mm ) Maximum width of saw-standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9,1" ( 2770mm ) Overall width 8,1" ( 2460mm ) Speed of saw pulleys,r.p.m. 8,000( 2440m/min ) Horse-power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42,6m) Shipping Specification : Standard Machine : Nett weight, lbs. 3583 Kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide f ...

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...