saws wood used for sale (1,048)

Wheel diameter: 900 mmCutting height: 300 mmcutting width: 880 mmMotor output: 4,5 kWTable dimensions: 840 x 900 mmTable tiltable: -15° bis +45° GradDimensions (L/W/H): 1.800 x 1.000 x 2.800 mmmachine weight ab.: ca. 1.000 kgsaw band length: 6.100 6.200 mm: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC CLASSIC 50 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -New machine from our demonstration room, Bj. 2022Pos. 1: Classic 50 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting sp ...

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm

cutting width: max. 330 mmCutting height: max. 150 mmSaw blade diameter: 550 mmMotor output: 7,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 550 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 220x150/330x50 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 7.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations and e ...

cutting width: max. 610 mmCutting height: max. 150 mmSaw blade diameter: 600 mmMotor output: 9,2 kWturning speeds: 2750 U/minRequired air-pressure: 7 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 770x1385x1370 mmSALVAMAC Legend 600 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 420x150/520x100/610x30 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 9.2 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibration ...

cutting width: max. 375 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 500fast semi-automatic chop saw-------------------------------------------------- -Maximum cutting areaOption A: 220x125/310x50mmOption B: 350x80/375x50mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 5.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations an ...

Technical details: - Min. blade length: 4,330 mm - Max. blade length: 4,430 mm - Possible saw blade widths: 6 - 25 mm - Max. blade thickness: 0.6 mm - Cutting speed: 1,168 m/min - Roll diameter: 600 mm - Cutting height: 360 mm - Cutting width: 570 mm - Table length: 580 mm - Table width: 580 mm - Diameter of suction nozzle: 100 mm - Mobile on wheels, 1 x wheel brake available - With motor brake, can be unlocked for changing the saw blade Engine data: - Power: 2.2 kW - Voltage: 380 V - Current: 5.5 A - Frequency: 50 Hz - Speed: 2,890 rpm Accessories: - incl. 1 x saw blade 9 x 4,430 mm - incl. 1 x saw blade 15 x 4,430 mm - incl. 1 x saw blade 25 x 4,430 mm (already mounted on machine!) - incl. 1 x saw blade 30 x 4,430 mm (Note: Use is not recommended by the manufacturer.) Dimensions (LxWxH): 1,118 x 750 x 2,113 mm Transport Dimensions = Machine Dimensions  ...

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.

cutting capacity - round: 300 mmdimensions of saw-band: 3320 x 27 x 0,9 mmcutting capacity - flat: 330 x 260 mmcutting capacity - square: 260 mmControl: evolution work height max.: 870 mm: 40 / 80 mt/minweight of the machine ca.: 1050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

Weibert HBS306 Band saw Cutting height 205mm Cutting width 306mm Motor 800W 230V Including undercarriage with driving device Vario drive from 370 to 750m/min Longitudinal stop with magnifying glass Cast iron table, swivel -8° to +45° G&SC-1901503901 Motor 400V G&SC-1901503902

Weibert BS 400 Band saw Wooden Band Saw Roller Diameter 400mm Belt width 25 mm Cutting height 320 mm Swivel -15° +45° Motor power 2.2 KW Belt length 3300 to 3400mm Suction nozzle 2x 100mm WJ-X00100 Exhibition machine

Form 7 473 Band saw Cutting height max. 90° 270mm Cutting width max. without stop 465mm Saw blade length 3455mm Motor: 1.6KW 400/230V Suction nozzle 2x 100mm Weight: 160kg Exhibition Machine:

Automatische nachschnittsaege,saummeranlage Mohringer 3 bewegischesaege steuerung microtec baujahr 2009 komplete anlage

Angle cutting machine

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...

Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Mitre saw Brand: Hebö Type: TA 131 Year: 1999 technical data: adjustable +/- 45° 400 V, 50Hz saw blade Ø approx. 400 mm 2 clamping cylinder extended workpiece support left- / right side each 840 mm 2 stops Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

Jet JMS-8 Cross-cut saw Demonstration machine D210mm x 2,8 x D16mm 220V 1200 Watt P1 Saw blade speed of 4500 rpm. Saw blade diameter 210/16mm Swivel range of 46°/46° Index possibilities every 5° and 22.5° Saw blade swivel 0-45° Cutting depth 90°/45° 60/25mm Cutting length 90°/45° 120/80mm Weight of 9.5 kg G&JET-10000818M Special price: net 99,-€

Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator