333 presses for recycling used for sale

Technical data baler:Manufacturer BollegraafType HBC 140Year of construction 2017Working hours 13,284, as of October 2025Press power main press 140 tons (max. 153,5 tons)Press power of pre-press 70 tonsFeed channel 1,600 x 1,100 mm (l x w)Capacity per cycle time 4,34 cbmTheoretic cycle time 16 sec.Bale size 1,100 x 1,100 mm (w x h), length adjustableDriving motor 2 x 75 kWConnected load 209 kWTying system 5-fold vertical, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx. 30 tons/hbulk weight of 50 kg/cbm approx. 46 tons/hbulk weight of 100 kg/cbm approx. 82 tons/hBale weight 850 up to 1.500 kgHydraulicoil 2.600 l Univis N46Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h)Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h)Machine weight baler approx. 51,810 tonsTechnical data feeding and elevating c ...

Technical data baler:Manufacturer BOAType 2040.S. 4V (6) 71.30Year of manufacture 2002Operating hours approx. 66,568 hours, as of October 2025Effective pump running time 13,614 hours, as of October 2025Number of bales pressed 139,167, as of October 2025Pressing force main press 71 tSpecific pressing pressure 9.0 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 45 kWTying system 4-fold vertical, fully automaticThroughput rates for quality:Bulk density 20?30 kg/m³, throughput capacity up to 9 tonnes/hourBulk density 40?60 kg/m³, throughput capacity up to 16 t/hourBulk density 80?100 kg/m³, throughput capacity up to 21 t/hourBulk density 100?150 kg/m³, throughput capacity up to 28 t/hourBale weight up to 600 kg/bale, depending on materialHydraulic oil tank capacity 800 lTr ...

Technical data baler:Manufacturer Presona AB, SwedenType LP 60 VH1Year of construction 2015Total operating hours, 30,143 hours, as of July 2025Effective pump running time onl 6,527 hours, as of July 2025Number of pressed bales 115,193 bales, as of July 2025Press force pre press 25 tMain press force 60 tonnesSpecific pressing force 73N/cm²Dimensions of feed chute 1,500 x 1,100 mmFilling volume / pressing cycle 2.7 m³Theoretical throughput capacity 800 m³/hourThroughput capacity under operating conditions 350 m³/hourBale dimensions 1,100 x 750 mmDrive power 37 kWTying 5-fold vertical, fully automaticThroughput capacity with aBulk weight of 50 kg/cbm 11 to 14 tonnes/hourBale weights 420 to 570 kg, depending on materialHydraulic oil tank volume 600 litresBaler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h)Transport dimensions excluding press 10,100 x 2,400 x 3,00 ...

Technical information baler:Manufacturer HSM GmbH + Co. KGTyp VK 4812 Year of construction 2014Hours of operation 5,612 hours, stand August 2025Press power main press 48 tonsSpecific press capacity 58,2 N/cm²Feed channel 1,250 x 1,020 mmTheoretic cycle time 11.2 sec.Theoretic throughput rate 332 m³/hourBale size 1,100 x 750 x 600 up to 1,200 mmDriving motor 30 kWConnected load 32 kWRated current 59 ATying system 4-fold horizontal, fully automaticThroughput rate at abulk weight of 20 kg/cbm up to 6 tons/hourbulk weight of 50 kg/cbm up to 13 tons/hourBale weight up to 550 kg, depends on materialSPS controller Siemens SIMATIC S7-200Operating panel Siemens HMI Touch PanelFilling quantity hydraulic oil tank 300 LOil type HVI 46Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)Machine weight p ...

Technical data baler:Manufacturer Presona ABTyp LP 80 VHK 1Year of construction 2012Total machine operating hours 25,895 hours, as of July 2025Pump operating hours, effective 14,135 hours, as of July 2025Number of bales pressed 235,597 pieces, as of July 2025Press power main press 78,5 tonsSpecific press capacity 95 N/cm² Press power of pre-press 28 tonsVolume of pressing chamber 2,7 m³Feed channel1,500 x 1,100 mmTheoretic throughput rate 930 m³/hThroughput rate under operating conditions 410 m³/hBale size 750 x 1,100 mmDriving motor 55 kWTying system 5 fold vertical, 3-fold horizontal, full automaticThroughput rate with a bulk density of30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material100 kg/m³ approx. 16 to 25 tonnes/hour, depending on materialThroughput capacity with MSW (Municipal Solid Waste) approx. 20  ...

For sale is a complete baling system consisting of conveyor technology, baling press and wire stations.Technical data baler:Manufacturer Bollegraaf Recycling Machinery B.V.Typ HBC 60AYear of construction 2000Hours of operation 32,169 hours, stand November 2024Press power main press 60 tonsPress power of pre-press max. 25 tonsFeed channel 1,320 x 1,100 mmTheoretic cycle time 18 sec.Bale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold verticalThroughput rate at abulk weight of 30 kg/cbm approx. 5,5 tons/hourbulk weight of 50 kg/cbm approx. 10 tons/hourbulk weight of 100 kg/cbm approx. 16 tons/hourBale weight 400 up to 750 kg, depends on materialSPS controller Telemecanique TSX MicroMachine weight baler approx. 24 tonsScope of delivery:1 piece chain belt conveyor1 Bollegraaf HBC 60A baler with whirling unit1 maintenance platform with access lad ...

For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross bindingTechnical data baler:Manufacturer BollegraafTyp HBC 110 K / 75 kWYear of construction 2007Press power main press 100 tonsPress power of pre-press 50 tonsOperating hours 22,605 hoursFeed channel 1,600 x 1,100 mmCapacity per cycle time 3,15 m³Theoretic cycle time 19 sec.Bale size 1,100 x 1,100 mmDriving motor 75 kWConnected load 126 kWFull load current 238 ATying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx.16 tons/hbulk weight of 50 kg/cbm approx. 25 tons/hbulk weight of 100 kg/cbm approx. 47 tons/hBale weight up to 1400 kg, depends on material and bale lenghtVolume oil tank approx. 1,300 lSPS controller Telemecanique TSX MicroOperating panel Schneider MAGELIS TouchBaler dimensions built up ...

Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating  ...

Technical data baler:Manufacturer BOA Recycling Systems B.V.Type M75-45-A-5-1.6 EcolineYear of construction 2021Hours of operation 2,658 hours (as of May 2024)Number of pressed bales 42,212 pieces (as of May 2024)Press power main press 71,2 kN (71 t)Specific press capacity 9 kg/cm²Operating pressure 280 barCylinder stroke 2,200 mmFeed channel 1,620 x 1,000 mmCapacity per cycle time 2,4 m³Theoretic cycle time 21 secondsTheoretic throughput rate 450 m³/hourBale size 1,100 x 720 mm, length variably adjustable up to 1,400 mmDriving motor 45 kWConnected load 100 kWCurrent consumption 200 ATying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal bindingThroughput rate at abulk weight of 30 kg/cbm approx. 13,6 tons/hourbulk weight of 50 kg/cbm approx. 24,2 tons/hourbulk weight of 100 kg/cbm approx. 36,4 tons/hourbulk weight of 150 kg/cb ...

For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996, refurbished in 10/2024Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h)Machine weight baler approx. 40 tonsComments:The baler was ...

Technical data packing press / can press / metal sheet press:Manufacturer unoTech GmbHType UPAXX 70Year of manufacture 2019Operating hours approx. 3,000 hoursPressing force 700 kN at 315 barFilling opening chute 420 x 1,250 mm (d x w)Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on materialDrive power 30 kWConnected load 40 kWPower consumption, total 70 AThroughput capacity for empty beverage cans with:one pressing stroke approx. 1.7 t/hourtwo pressing strokes approx. 2.5 t/hourAchieved compaction approx. 1200 kg/m³Hydraulic oil tank capacity 850 lPress dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)Transport weight press approx. 9.5 tAccessories:Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355Material properties:According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet off ...

Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50)Year of manufacture 2007Operating hours 13,209 hours, as of MarchNumber of bales pressed: 23,379 balesPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control  ...

Technical data baler:Manufacturer BollegraafTyp HBK 100Year of construction 2004Hours of operation 34,480 hoursPress power main press 100 tonsPress power of pre-press max. 42 tonsFeed channel 1,600 x 1,100 mmFilling volume 3.15 m³Theoretic cycle time 22 sec.Theoretic throughput capacity up to 450 m³/hourBale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 30 kg/cbm approx. 13 tons/hourbulk weight of 50 kg/cbm approx. 20 tons/hourbulk weight of 100 kg/cbm approx. 30 tons/hourThroughput rate with ruffler approx. 20 tons/hourBale weight 550 up to 750 kg, depends on materialVolume hydraulic oil tank 750 lSPS controller Telemecanique TSX MicroTransport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h)Machine weight baler approx. 19 tonsComments:Unlike the standard HBC pre ...

2014 Conical dewatering press S15-E-EVA-7,5 food grade model. Completely revised. History and documentation available. Elektromotor capacity: 7,5kW.

This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic

Specifications Maximum pressure: 4 tons Press force: 1.14 kg/cm² Bale size: 700x500x600 mm Bale weight: approx. 60 kg Power connection: 230V / 1.1 kW Year of Make: 2012 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional after technical supervision. If you have any questions, please call us: +48 696 072 985

Specifications Maximum pressure: 5.7 tons Pressing force: 1.18 kg/cm Bale size: 600x800 mm Bale weight: approx. 70 kg Power connection: 400V / 1.5 kW Year of Make: 2009 Productivity: approx. 3 bales/hour

Specifications Maximum pressure: 26 tons Power connection: 400 V/ 4.6 kW Press force: 2.7 kg/cm² Year of Make: 2016 Bale size: 1200x800x1150 mm Bale weight: approx. 400-450 kg Price: on request Machine is fully functional, after technical supervision and renovation.

Specifications Maximum pressure: 50 tons Year of Make: 2010 Press force: 6.5 kg/cm² Number of bindings: 4 vertical Channel cross-section: 700 x 1100 x reg mm Dimensions of the tailgate: 1050 x 1250 mm Bale weight: 500 kg Weight: approx. 9 tones Power connection: 400 V/ 22 kW Bale tying: automatic

GTG H2 tire baler Length 8.10m Height 2.20m Width 1.40m 1x2 hole motor18.5Kw Beam 110x130 4x horizontal, 3x vertical binding full of stuffing opening reversers

Baler CK 800. Dimensions Height 2480mm Width 1440mm Length 7420mm Weight approx. 5200 kg Chute 1500mm x 720mm Parameters: Pressure 60 tons Motor power 15 Kw Beam dimensions: 1080mm x 750mm x 1200mm

For sale baler 600HFE with Dimensions: Height 2480mm Width 1440mm Length 7420 mm Weight 5200kg Chute 1500mm x 720mm Parameters: 15 Kw Motor Pressure 60 tons Beam: 1080mm x 750mm x 1200mm beam weight approx. 650 kg

Horizontal baler Compression force 60 tons Bale Size : 1100 x 800 x (300-11000) feed opening size: 1350 x 1050 Bale Lines 4x Bale Weight: 500, 600 voltage 380 V power 22 Kw machine size: 6900 x 1870 x 2000

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

For Sale: Hydraulic Baler Total length: 8.30 m Total width: 1.60 m Total height: 2.80 m Feed hopper width: 2.00 m Feed hopper height: 0.90 m Horizontal tying: 4 times Motor power: 15 kW Full bale ejection system Good working condition. For more information, please contact.

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 1250 x 950 mm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 22 kW Bale tying: automatic

ANNOUNCEMENT – BALER HB 60A Net price: 130,000 PLN Bale dimensions: 920 x 665 x 1200-1600 mm (H x W x L) Motor power: 30 kW Baler dimensions: 2800 x 1500 x 5850 mm Tying system: 4x horizontal Feeding opening: 585 x 1200 mm The HB 60A baler is a reliable and efficient machine, perfect for companies involved in recycling and waste processing. With a powerful motor and an effective tying system, it ensures high performance and ease of operation. Check out other machines available on our website. We offer a wide range of equipment tailored to different needs. Feel free to contact us – we will be happy to provide more details.

baler hydraulic power pump HSM V-press 1160 Plus

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor