333 presses for recycling used for sale

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Technical data baler:Manufacturer PaalTyp Konti 275 EYear of construction 2006Hours of operation in total 54,050 hoursPress power main press 80 tons at 300 barSpecific press capacity 9,7 kg/cm²Feed channel 1,600 x 1.020 mm (l x w)Throughput capacity under operating conditions 350 m³/hourBale size 750 x 1,100 mm, length variableDriving motor 75 kWConnected load 94 kWRated current 180 ATying system 4-fold vertical, fully automaticBale weight up to 750 kg, depends on materialVolume hydraulic oil tank 2,100 lSPS controller (manuf., type) Siemens Simatic S7-300Operating panel (manuf., type) Siemens Multi PanelTransport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h)Machine weight baler approx. 21 tonsCondition of the baler:The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are no ...

Pressing pressure 8.2 t Specific pressing force 33 N/cm2 Throughput theoretically / practically without oil cooler approx. 18m3/h / 11m3/h Filling opening W450 x L 700 mm Bale cross-section W 500 x H 500 mm Bale length adjustable in 4 steps 400 – 600 mm Bale weight at 600 mm length (depending on material) 30-60 kg Drive power 4 kW Control HSM Slide Control Left side of the system Dimensions of the machine L 3935 x W1150 x H1405mm Weight approx. 900 kg Colour in RAL Grey Masch.- Nr. 28921/ 6424P02073 Year of construction 2007 Off the pitch as seen

Pressing pressure 16 tons Specific pressing force 46 N/cm2 Filling opening W 620 x L 1000 mm Bale cross-section W 700 x H 500 mm Bale weight at 1200 mm length (depending on material) up to 90-220 kg Theoretical throughput without oil cooler approx. 62 m3/h Practical throughput without oil cooler approx. 37-43 m3/h Drive power 11kW Weight approx. 4.5 t Born in 1999 Machine No. 29335 / 6607P00648 Colour in RAL RAL9002

Technical data baler:Manufacturer Riko Ekos d.o.o Type S-60K (5)Year of construction 2019Operating hours 673 hours, as of August 24Number of pressed bales 1,127 bales, as of August 24Pressing force main press 60 tonnesDimensions of feed chute 1,100 x 1,400 mmFilling volume / pressing cycle 2.1 m³Bale dimensions 720 x 1,100 mm (W x H), the length is variableDrive power 37 kWConnected load, total 47 kWTying 4-fold horizontal, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 5 - 6 tonnes/hourBulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hourBulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hourFilling volume of hydraulic oil tank 800 litresPLC control Siemens SIMATIC S7-1200Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)Effective transport dimensions excluding press, with dismantled tying  ...

Technical data on the EPS (Polystyrene) press:Manufacturer FZ-Recycling GmbH & Co. KG, GermanyType FZR 320Year of construction 12/2022Drive power shredder 4 kWDrive power of compactor screw 7.5 kWDrive power hydraulic unit for the holding clamp in the press channel 1.1 kWTotal connected load 12.6 kWCurrent consumption 32 ACompaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material)Block weight after compaction approx. 300kg/m³ (depending on material)Block dimensions 320 x 320 mm, variable lengthThroughput approx. 100 kg/hour, depending on materialAchievable density approx. 250 - 300 kg/m³The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped.Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h)Transport weight press 1,325 kgCondition of the baler:The press was only used sporadically, is in very good conditio ...

Technical data baler:Manufacturer Riko Ekos d.o.o Type S-60K (6)Year of construction 2019Operating hours 2,320 hours, as of August 24Number of pressed bales 4,359 bales, as of August 24Pressing force main press 60 tonnesDimensions of feed chute 1,100 x 1,400 mmFilling volume / pressing cycle 2.1 m³Bale dimensions 720 x 1,100 mm (W x H), the length is variableDrive power 37 kWConnected load, total 47 kWTying 4-fold horizontal, fully automaticThroughput capacity with abulk density of 30 kg/cbm approx. 5 - 6 tonnes/hourBulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hourBulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hourFilling volume of hydraulic oil tank 800 litresPLC control Siemens SIMATIC S7-1200Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)Effective transport dimensions excluding press, with dismantled tyin ...

Technical data baler:Manufacturer Europress Umwelttechnik GmbH, GermanyType EP5 150 V5Year of construction 2015Operating hours 19,173 hoursNumber of pressed bales 282,961 balesNumber of press strokes from the press ram 1,895,112 press strokesPressing force of main press 150 tSpecific pressing force 181.8 N/cm²Dimensions of feed chute 1,000 x 2,000 mm (w x l)Bale dimensions 750 x 1,100 mm (h x w), length variableDrive power 2 x 55 kW + 15 kW + 2 x 0.75 kWRated current 230 ACable cross-section supply 120 mm²Tying 5-fold vertical, fully automaticHydraulic oil tank capacity 4,300 lPLC control Siemens S7 / ET200STransport weight press 35,800 kgSpecial equipment:Base plates and side walls made of HARDOX steelFree tamper in front of the counter blade, with cleaning cycleScope of delivery:1 piece baler1 piece control cabinet1 set of oil collecting pans under the baler1 piece maintenance platfo ...

Technical data baler:Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, GermanyType AVOS 1410 BS-22/50Year of construction 2023Pump operation hours 1,851 hours, as of July 24Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment)Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment)Feed channel 1,400 x 1,000 mmTheoretic cycle time 13 secTheoretic throughput capacity 266 m³/hBale size 1,100 x 750 (w x h), the length is variableDrive power 22 kWConnected load 65 kWTying system 4-fold, vertical, fully automaticThroughput capacity at abulk weight of 30 kg/cbm approx. 5,5 t/hbulk weight of 50 kg/cbm approx. 7,5 t/hbulk weight of 100 kg/cbm approx. 9,7 t/hBale weight with a bale length of approx. 1.2 m up to 500 kg, depends on materialSPS controller Siemens S7-1500Operating panel Schneider HarmonyBaler dimensions ...

Baler Avermann, type AVOS 1410 BR5 – 45/80, press force 80 t, year of construction 2016 Specifications: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of Make: 2016 Press force: 80 t Drive power: 45 kW Filling opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Binding: 5-fold vertical, automatic Machine dimensions: approx. 10850 x 2400 x 3800 mm (LxWxH) Machine weight: approx. 18,000 kg Remark: The press is still in operation and can be visited on request. It is expected to be available from February 2026. A matching WESTERIA conveyor belt is optionally available. In November 2025, the master cylinder was replaced. Please note: All tech ...

Vertical baler HSM VL 600, built in 2002 Specifications: Manufacturer: HSM Type: HSM VL 600 Year of Make: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: paper, cardboard, foil Remark: The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

In the pipeline Baler Dixi 60 SLS, built in 2016 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2016 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

In the pipeline: Baler Dixi 60 SLS, year of manufacture 2013 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

Bollegraaf HBC 120 baler, built in 2021, very good condition Specifications: Manufacturer: Bollegraaf Type: HBC 120 Year of Make: 2021 Pressing force: 120 t Drive power: 90 kW Total power: 141 kW Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 4590 mm (LxWxH) Weight: approx. 31,600 kg Materials: paper, cardboard, foil, PET, beverage cans, textiles. The press is in very good condition. It is still in operation for about 4 months and can be visited under operating conditions on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any ti ...

Width: 1,400 mm, Height: 1,120 mm, Length: 2,450 mm, Package cross-section: 300 x 300 mm, Drive power: 2 x 90 kW, Working pressure: 290 bar, Max. working pressure: 300 bar, Year of construction: 1986, Weight: approx. 50 t

In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...

Good day We hereby offer you a used baler from the manufacturer Bollegraaf type HBC 120 S, incl. conveyor belt. As a special feature, this press offers a cross-bonding with 10 wires. You can optionally tie vertically with 5 wires and if you want to press plastic, for example, you can add a wide 5 wires in a horizontal binding. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Bollegraaf Type HBC 120 S Year of construction 2010 Hours 43433 Hours Pressing force of the main press 120 t Power of the drive motor 90 kW Length of the feed belt approx. 11 m Length of the ascending band approx. 15 m The inner width of the conveyor belt is 1554 mm The entire system requires an installation area of approx. 15 x 30 x 7.7 m Depending on the ...

used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg

Avermann two-chamber baling press, built in 1992. Errors and prior sale excepted

Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was  ...

Just arrived: Presto HPK 50 HS baler, built in 2015 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2015 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Remark: The press has just arrived at our warehouse. More photos will follow. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The  ...

Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9960 Year of Make: 2016 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, foil The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepay ...

Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Specifications: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press was dismantled from ongoing operations. The conveyor belt shown in the pictures is not part of the scope of services. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liabili ...

Next competition: February 2026

Technical specifications:, Length of the press: approx. 7,000 mm, Width of the press approx. 4,800 mm, Press height: approx. 1,700 mm, Package size: 400 x 400 x variable, Filling box size, Length: 1,200 mm, Width: 1,000 mm, Hopper opening: 2,000 x 2,000 x 1,200 mm, Total length of the press chamber: 1,900 mm, Press chamber width: 1,000 mm, Depth: 400 mm, Feed pressure 150 to., Finished print: 250 to, Sliding door: 25 tons, Main drive: 1 x 45 kW electric motor 380V/50Hz, 1 x 22 kW electric motor 380V/50Hz, Pumps: 1 x 3660 l/min. Rexroth 315 bar, 1 x 230 L/min. Rexroth 80 bar, Length of the press: approx. 7,000 mm, Height of the press: approx. 1,700 mm, length: 1,200 mm, width: 1.000 mm, Total length of press chamber: 1.900 mm, Wide press chamber: 1.000 mm, Depth: 400 mm, Finished print: 250 tons, sliding door: 25 to

Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dusts incl. autom. Level detector - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Control cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic power unit: approx. 300 l tank for hydraulic oil - Weight: approx. 1,100 kg 2 = 2,200 kg Used briquetting press in good condition W-pliers cylinder, pliers (RB 120 reinforced), pliers connection flange renewed on one side (left in the direction of conveyance) briquetting | Briquette Press | Briquetting Presses | Briquette Press | Briquetting # Briquetting press type GP 120 Tandem Briquetting ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3/So Hours: 85 hours Year of Make: 2022 specifications: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 47,400 kg Filling opening: 1,020 x 1,600 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and install ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V4 / H3 / So Operating hours: approx. 20,000 hours Year of Make: 2011 specifications: Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Specific cutting force: 145 N/cm² Main pump drive 3 x 30 kW Power Steering Pump: 1 x 11 kW Nominal power: 110 kW Nominal current consumption: 220 A max. permissible Connection fuse: 250 A Pump capacity: 3 x 180 Ltr./min. Oil tank capacity: 2,400 ltr. Volume capacity under operating conditions: max. 320 m³/h Binding: 4-fold vertical and 3-fold horizontal with wire Filling opening: 1,020 x 1,600 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Operating voltage: 400V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5.0% Degree of protectio ...