333 presses for recycling used for sale

Technical data: model: RMH DK 50 x 70 machines dimensions without preloading box / side case box L x B x H / in metres: 4.46 x 1.34 x 2.43 loading box dimensions L x B x T / in mm: 1.575 x 840 x 700 parcel dimension in cm: 50 x 70 x material amount engine kW / volt: 22 / 400 ground rams pressure in T: 100 working pressure in BAR: 240 Presszyklus/seconds: 75 weight in kg: 7300 control: By hand / Automatk all machines are delivered in the state kind equipment with hand lever control and oil cooler. Optionally with lateral preloading box and radio control available.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper ...

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

Sell a press for cans and tin containers Make: Becker Pruente Built: 1984 E-engine: 4KW/ 175Bar

- Brand: FARELL - To make bullets - Loading mouth: 1200 x 500 - Tunnel size: 800 x 600 - Motor: 15hp (11kw) - With electrical panel

Brand: JOVISA Model No.: HC-2/40 Year: 2011 Engine: 25 hp (18.5 kw) Refurbished 2020 Automatic vertical tying 40 tons of force 800x700 bales Weight:500 kg

Vertical baling press. With a camera. Bale weight 30 to 50 Kg. Pressure 5 Ton. Motor 1.5 Kw. For paper, cardboard and plastic. Bullet dimensions 700 x 500 x 450 mm

Year: 2005 Motor: 4Kw (5.5hp) Pressure: 58 tons Case opening: 600 mm Case depth: 1190 mm Bales: 1.20 X 0.90 X 0.70 Approximate weight: 400-500 Kg. Others: Automatic return of the press plate for ease of use

Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Horizontal hydraulic baling press with manual tying. Engine: 40 hp, bullet size: 1000x900 mm, bullet weight: 600 Kg.

Horizontal hydraulic press with automatic vertical tying, exit tunnel: 800 x 700. Inlet: 1.05 x 720, engine: 15 hp, with electrical panel.

Horizontal hydraulic baling press, with manual tying, brand: Faes, bale size: 0.80x0.60 m, material inlet mouth: 1.15x0.75 m, engine: 10 hp.

Hydraulic press for metal cans, make: Serman, model: HI, year: 2012, engine: 4 Kw (5,5 hp), drawer: 550x450 mm. MF-0068

Baling press, make: Imabe, motor: 25 hp, bullet measurement: 800x800 mm. Semi-automatic side tying. Entrance mouth: 1,10x0,80. With electrical panel and mounted on multilink. Second-hand hydraulic press at the best price. Machinery checked and guaranteed by expert technicians Save money!

Technical data baler:Manufacturer HSM GmbH + Co. KG, GermanyType VK 8818 R-FUYear of construction 2012Total operating hours: 12,078 hours, as of September 2025Pump operating hours 6,616 hours (effective pump running time)Number of bales pressed: 65,792 bales, as of September 2025Main press force 880 kNSpecific pressing force 120 N/cm²Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 secondsTheoretical throughput capacity 643 m³/hourBale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mmDrive power 2 x 45 kW frequency-controlledConnected load 98 kWTotal current consumption 192 AFuse protection 250 A slow-blow5-fold horizontal tying, fully automaticThroughput rates with abulk density of 20 kg/cbm 12.86 t/hourBulk weight of 50 kg/cbm 32.15 t/hourBale weights with a bale length of approx. 1.2 m 6 ...

Tomal flocculant preparation with CE compliance

Sale without guarantee, as is, where is. For more information please sent inquiry

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of dru ...

McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)

McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen  ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...

STRAUTMANN BALE TAINER, This particular vertical press has a storage space which allows to make multiple bales, automatically., 60 Ton, Materials: Paper, cardboard, PET bottles, film, Total installed power 11 kw, Drive power 5,5 kw, height of input point 1.370 mm., inpout point width 1069 mm, Balke size LxWxJ 1,1 x 1,1 x 0,9 mt., 3 panes, weight up to 400 kg. (3 disks), 4 -tie vertical bindings, Constructed in 2012, Good working conditions, Total dimensions: LxWxH 6,355 x 2,056 x 2,756, Weight 7.050 kg ca, installed power - used power in work: about 60-65% : 11

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Technical data baler:Manufacturer Presona ABType LP 50 EH1Year of construction 2005Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of AprilPressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hourThroughput capacity under operating conditions 260 m³/hourDimensions of feed chute 1,250 x 1,100 mmBale chamber volume 2.2 m³Bale dimensions 1,100 x 720 mm, variable lengthDrive power 22 kWTying 5-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm 6 up to 7 tonnes/hourBulk weight of 50 kg/cbm 7 up to 9 tonnes/hourBulk weight of 100 kg/cbm 11 up to 14 tonnes/hourBale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litresPLC control Telemecanique TSX Micro Schneider Magelis control panelEffective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm  ...

Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 112Year of construction 2002, partially refurbished in December 2025Operating hours 44,590 hours, stand December 2025Press power main press 200 tonsSpecific press capacity 16,5 kg/cm²Feed channel 2,000 x 1,020 mmFilling volume 2,65 cm³Theoretic throughput rate 795 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 75 kWTying system 5-fold horizontal, full automaticThroughput rate at MSW approx. 48 up to 54 tons/h, depends on materialVolume hydraulic oil tank 3,100 lMachine weight baler approx. 50,8 tonsScope of delifery:1 piece baler MACPRESSE, type 111A1 operating manual with CE declaration, electrical and hydraulic circuit diagramComments:The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced:? Hydraulic oil tank emptied and cleaned? Oil and ai ...