peripheral equipment (e.g. heating, conveying, drying) used for sale (608)

Motorized feeder for twin-shaft multi-blade saws: - length about 5.5 m, width of roller conveyors 550 mm - variable speed of the rollers from the control panel - 1 motorized upper wheel with pneumatic pressure - 2 side wheels with idle alignment and pneumatic pressure - supplied with inclined belt for unloading waste at the entrance, Suitable for working in line after an automatic cut-off machine Visible, installed and in operation until August 2025. Delivery availability from September 2025.

DMO motorized roller conveyor for panel extraction aid from a single-sided edgebanding machine (or other tracked machine). Machine according to CE standards

SPECIFICATIONS: Max. processing dimensions mm: 2400 x 1150 extendable and tiltable, suitable for processing doors Pneumatic operation

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

SPECIFICATIONS: Flow rate m3/h: 3,500 Number of bags: 3 - Ø 470 mm Number of filter bags: 24 - Ø 230 mm, height 2000 mm Installed capacity: KW 4.0

SPECIFICATIONS: Hopper size mm: 1600 x 1400 Rotor length mm: 1400 Installed capacity KW: 37.0 Capacity per hour: 700/1000 Kg Screen diameter mm: 16 Hydraulic operation Application Refiner

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

TECHNICAL DATA: 04 roller conveyors mm: 1900 x 6000 01 roller conveyor mm: 3000 x 1200

TECHNICAL DATA: Main motor power KW: 90

Main engine KW: 90

Capacity max Kg: 400 Total connection KW: 1.1

Hydraulic gripper for wooden beams with modular suction cups Load capacity kg: 700 Number of suction cups: 16 Dimensions of suction plate mm: 80 x 750 Procedure mm: 8000

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)

Type AG-1 Voltage 380 V (50 Hz) Number of revolutions 3000 r/min Water output 12 ltr/h Engine power 0.55 kW Transport dimensions 650x650x400 mm Weight 14 kg Price 250 Eur (EXW Jonava, Lithuania)

4 pcs. Diameter 400 mm Width 960 mm Height 450 mm Different lengths

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Motor power: 1,5 kW. Capacity: 2480 m3/h. Diameter of connection hole for aspiration pipe: 100 mm. Bag capacity: 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 51 kg.

Motor power: 2,25 kW. Output: 3880 m3/h. Diameter of connection hole for aspiration pipe: 3 x 100 mm. Bag capacity: 2 x 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 64 kg.

To turn the ini stakli ų nukrovimui i ų gluing. Length: 3000 mm. Width: 500 mm. 39 knives. The dimensions of the conveyor can be played under č ū kei į need.

1 of used pneumatic, overhead mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Partner PRF, new 1993. Tilting gripper-head with suction cups and venturi vacuum generator for max. load 120 KG. Maximum radius 2.200 mm. Vertical stroke 150 to 1.500 mm. 2 Rows of each 9 suctioncups, width adjustable between 455 and 945 mm. Last used for handling doors.

1 gebrauchter pneumatischer, überkopf montierter Handhabungsmanipulator (Balancer), Hersteller Dalmec, Typ Partner, Baujahr 1993. Schwank-Greifer mit Sauger und Venturi Vakumerzeuger mit max. Tragkraft 120 KG. Max. Arbeitsradius 2.200 mm, vertikaler Hub von 150 bis 1.500 mm. Zuletzt im Einsatz zum Manipulieren von Türen.

Sacot CA plank stacker. SCA. SAWMILL 1400 A professional stacker designed for automatic stacking of boards into even, stable and repeatable stacks. An ideal solution for sawmills and wood processing plants, significantly increasing efficiency and comfort of work. TECHNICAL PARAMETERS Stacking Material Length: 770-1400mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding/Receiving: Roller Receiving Table Structure: Steel, Industrial, Heavy Duty Control: Electric + Pneumatic The stacker is perfect for: sawmills, wood processing plants, production lines, production of short and medium elementsEXPANSION OPTIONS (optional): a complete technological line, including: Weinig Hydromat 23c planer 60m/min SACOT Formatizer SACOT stacker

Lamier FL 7B 4kw extraction system Power 4kw Number of bulk bags 2pcs Diameter of bags fi600mm Number of filter bags 32pcs Diameter of filter bags fi 200mm Filter bag length 1550mm Bag shaking system Inlet port diameter 300mm CE Certified Dimensions: height 370cm, width about 260cm, depth 110cm

Technical data of the dryer: -number of chambers 3 – capacity of one chamber 90 m3 -chamber size 9.6x7.3x4.1 m – total dimensions of the chamber 10.2x7.5x5.4 m - type of wood hard, -final humidity 10 +/- 2%